SQA Services Jobs Hiring Now
SQA Services is hiring for 26 open roles on Migrate Mate as of July 16, 2026, concentrated in compliance & risk and engineering (Non-Software). Migrate Mate updates SQA Services's live openings daily. SQA Services is a quality assurance and inspection services firm placing inspectors and auditors across aerospace, manufacturing, and regulated industries at client sites throughout the United States.
Find SQA Services JobsOverview
SQA Services hiring data on Migrate Mate, as of July 16, 2026.
- Open jobs
- 26
- Top team
- Compliance & Risk
- Seniority
- Across all levels
- Work type
- 4% remote or hybrid
- Top location
- Anaheim
Open Roles at SQA Services
Showing 25 of 26+ SQA Services jobs
Key Responsibilities:
- Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements.
- Perform incoming inspections from external providers of products and services (e.g., nickel plating).
- Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run).
- Compile final inspection sign-off sheets and inspection packages.
- Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent.
- Review and validate the justification for parts not inspected at final inspection.
- Audit and validate the execution of inspection plans as applicable.
- Document non-conformances using approved methods and submit non-conformance reports for customer disposition.
- Verify hardware cleanliness and absence of internal or external foreign object debris.
- Verify fasteners are properly installed; assure torque stripe is continuous and of correct color.
- Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness.
- Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance).
- Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance.
- Ensure the protection and preservation of inspected products for subsequent processing and shipment.
- Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination.
Required Qualifications:
- Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise.
- Proficiency in dimensional inspection of precision tolerance parts.
- Strong knowledge and hands-on experience with all inspection tools.
- Ability to understand and interpret complex GD&T requirements and validate complex assemblies.
- Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.).
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
Preferred Qualifications:
- Certified or previously certified in GD&T ASME Y-14.5.
- 5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Key Responsibilities:
- Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements.
- Perform incoming inspections from external providers of products and services (e.g., nickel plating).
- Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run).
- Compile final inspection sign-off sheets and inspection packages.
- Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent.
- Review and validate the justification for parts not inspected at final inspection.
- Audit and validate the execution of inspection plans as applicable.
- Document non-conformances using approved methods and submit non-conformance reports for customer disposition.
- Verify hardware cleanliness and absence of internal or external foreign object debris.
- Verify fasteners are properly installed; assure torque stripe is continuous and of correct color.
- Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness.
- Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance).
- Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance.
- Ensure the protection and preservation of inspected products for subsequent processing and shipment.
- Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination.
Required Qualifications:
- Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise.
- Proficiency in dimensional inspection of precision tolerance parts.
- Strong knowledge and hands-on experience with all inspection tools.
- Ability to understand and interpret complex GD&T requirements and validate complex assemblies.
- Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.).
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
Preferred Qualifications:
- Certified or previously certified in GD&T ASME Y-14.5.
- 5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Job Roles at SQA Services
Working at SQA Services
SQA Services's 26 open roles are across all levels, and about 4% are remote or hybrid. The most active teams are compliance & risk, engineering (Non-Software), and aerospace engineering. SQA Services provides third-party quality inspection, source inspection, and audit services to clients in aerospace, defense, pharmaceutical, and medical device sectors. Inspectors and auditors are deployed directly to supplier and manufacturing sites, making most roles field-based and location-specific. Most SQA Services roles are based in Anaheim, with some in Los Angeles and Fort Worth.
Explore more roles by function
Browse thousands of live openings across engineering, sales, product, and more, and apply in just a few clicks.
Browse jobs by roleSQA Services Jobs: Frequently Asked Questions
How many jobs is SQA Services hiring for right now?
SQA Services is hiring for 26 open roles on Migrate Mate as of July 16, 2026, updated daily, concentrated in compliance & risk and engineering (Non-Software). Openings span quality inspection, source inspection, and audit disciplines across aerospace, mechanical, electromechanical, and pharmaceutical or medical device specialties. Migrate Mate pulls SQA Services's latest postings so the count reflects current availability.
What kinds of roles does SQA Services hire for?
The most active teams are compliance & risk, engineering (Non-Software), and aerospace engineering. SQA Services consistently hires quality inspectors across cable and wire harness, mechanical, and electromechanical disciplines, along with aerospace source inspectors, traveling field inspectors, quality auditors for pharmaceutical and medical device clients, and field engineering managers. Most postings are across all levels, with many roles requiring industry-specific certifications or documented inspection experience.
Are SQA Services jobs remote or in-person?
Mostly on-site. About 4% of SQA Services's open roles on Migrate Mate are remote or hybrid as of July 16, 2026, with the rest based in Anaheim. Each SQA Services listing shows its work location so you can filter before applying.
How do I apply to a job at SQA Services?
Find an open role at SQA Services on Migrate Mate, then follow the listing directly through to SQA Services' own application process. SQA Services manages its own recruiting and hiring decisions. Migrate Mate keeps the listings current so you can browse what is actively open before going to the source to submit your application.
Does SQA Services hire entry-level?
Most of SQA Services's open roles on Migrate Mate are across all levels as of July 16, 2026. Check individual SQA Services listings for stated experience requirements.
Where is SQA Services hiring?
Most SQA Services roles are based in Anaheim, with some in Los Angeles and Fort Worth, and about 4% offer remote or hybrid work as of July 16, 2026. Migrate Mate shows the location on each listing.