Welder Fitter Jobs in Alabama
Welder Fitter jobs in Alabama are open across Montgomery, Birmingham, and Moody and other Alabama metros, with employers like Rheem Manufacturing, Vulcan Materials Company, and EBSCO Information Services hiring at every experience level. Find a role that fits below and apply directly.
Find Welder Fitter JobsOverview
Showing 5 of 12+ Welder Fitter jobs
INTRODUCTION
The ASME Hand Arc Welder will serve our Water Hearer Division, located in Montgomery, AL.
Responsibilities
- Welds together metal component parts; as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment.
- Must be able to set and adjust welding generator to insure proper voltage output.
- Must be able to select appropriate size and composition of electrode and properly mount in holder.
- Repairs broken or cracked parts, fills holes and increases size of metal parts, using welding equipment.
- Welds in flat, horizontal, or vertical position.
- Cleans or degreases parts, using wire brush, portable grinder, or chemical bath.
- Inspects finished workpiece for conformance to specifications.
- Chips or grinds off excess weld, slag, or spatter, using hand scraper or power chipper, portable grinder, or arc-cutting equipment.
- Positions workpieces and clamps together or assembles in jigs or fixtures.
- Preheats workpiece, using hand torch or heating furnace.
- Required to pass and maintain employer performance tests or standard tests; as required by the certification standards of professional and technical associations.
- Maintain good housekeeping in work area.
- Observe all departmental safety requirements.
- May be exposed to high noise levels.
- Performs other duties as assigned.
QUALIFICATIONS
- High School Diploma/GED.
- Position requires Hand Arc Welder to hold, and maintain a current ASME certification.
- A minimum of 1 to 2 years prior work experience as a Hand Arc Welder and/or an Associate degree or Certificate in Welding Technology.
- Continuous lifting of 5-25 lbs.
- Frequent lifting of 25-60 lbs.
- Occasional lifting of 60+ lbs.
- Frequent strain due to position and unsupported lifting.
- Position will require the use of personal protective equipment to include, but not limited to, a face shield, respirator and protective clothing.
INTRODUCTION
The ASME Hand Arc Welder will serve our Water Hearer Division, located in Montgomery, AL.
Responsibilities
- Welds together metal component parts; as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment.
- Must be able to set and adjust welding generator to insure proper voltage output.
- Must be able to select appropriate size and composition of electrode and properly mount in holder.
- Repairs broken or cracked parts, fills holes and increases size of metal parts, using welding equipment.
- Welds in flat, horizontal, or vertical position.
- Cleans or degreases parts, using wire brush, portable grinder, or chemical bath.
- Inspects finished workpiece for conformance to specifications.
- Chips or grinds off excess weld, slag, or spatter, using hand scraper or power chipper, portable grinder, or arc-cutting equipment.
- Positions workpieces and clamps together or assembles in jigs or fixtures.
- Preheats workpiece, using hand torch or heating furnace.
- Required to pass and maintain employer performance tests or standard tests; as required by the certification standards of professional and technical associations.
- Maintain good housekeeping in work area.
- Observe all departmental safety requirements.
- May be exposed to high noise levels.
- Performs other duties as assigned.
QUALIFICATIONS
- High School Diploma/GED.
- Position requires Hand Arc Welder to hold, and maintain a current ASME certification.
- A minimum of 1 to 2 years prior work experience as a Hand Arc Welder and/or an Associate degree or Certificate in Welding Technology.
- Continuous lifting of 5-25 lbs.
- Frequent lifting of 25-60 lbs.
- Occasional lifting of 60+ lbs.
- Frequent strain due to position and unsupported lifting.
- Position will require the use of personal protective equipment to include, but not limited to, a face shield, respirator and protective clothing.
See All 12 Welder Fitter Jobs in Alabama
Find roles in Alabama that match your experience and apply in just a few clicks.
Find Welder Fitter JobsWelder Fitter Jobs by City in Alabama
Where Alabama roles are concentrated, by current openings.
Welder Fitter Job Market in Alabama
A snapshot from current Alabama openings, updated as new roles post.
Who's Hiring
- Rheem Manufacturing5
- Vulcan Materials Company3
- EBSCO Information Services2
- Hardy Ag1
- Terex Corporation1
Top Industries Hiring
- Manufacturing6
- Chemicals & Materials3
- Mining & Natural Resources3
- Technology & Software2
What Alabama Employers Look For
The qualifications that appear most often in welder fitter jobs across Alabama.
- Proven experience with SMAW, GTAW, GMAW, or FCAW welding processes in structural or pipe applications
- Ability to read and interpret engineering drawings, weld symbols, and fabrication blueprints
- AWS, ASME Section IX, or API 1104 weld certifications preferred or required
- Proficiency in layout, fitting, and tacking components to precise dimensional tolerances
- Familiarity with cutting tools including plasma cutters, grinders, and oxy-fuel torches
- High school diploma or GED, with completion of an apprenticeship or vocational welding program a plus
Welder Fitter Jobs in Alabama: Frequently Asked Questions
How many welder fitter jobs are there in Alabama?
There are 12+ welder fitter openings in Alabama on Migrate Mate as of June 2026, with the most roles in Montgomery, Birmingham, and Moody. New positions post regularly as employers across Alabama hire.
How much do welder fitters make in Alabama?
Welder fitters in Alabama earn a median of about $48,490 a year, based on May 2025 Bureau of Labor Statistics wage data, ranging from around $36,710 for the lowest 10% to over $66,820 for the top 10%. Pay rises with experience, specialty, and employer.
Which Alabama cities have the most welder fitter jobs?
Montgomery, Birmingham, and Moody have the most welder fitter openings in Alabama right now, with additional roles spread across smaller metros statewide.
Which companies hire welder fitters in Alabama?
Employers hiring welder fitters in Alabama include Rheem Manufacturing, Vulcan Materials Company, and EBSCO Information Services, based on current listings on Migrate Mate as of June 2026.
Are there remote welder fitter jobs in Alabama?
Yes. About 0% of welder fitter openings tied to Alabama are remote or hybrid as of June 2026. The rest are on-site roles based in Alabama metros.
How do I apply for welder fitter jobs in Alabama?
You can apply to welder fitter jobs in Alabama directly on Migrate Mate. Search the listings above, find roles that match your experience and preferred Alabama location, then apply to each one that fits.
See All 12 Welder Fitter Jobs in Alabama
Find roles in Alabama that match your experience and apply in just a few clicks.
Find Welder Fitter Jobs