Technical Field Engineer Jobs
Technical field engineer jobs are open across telecommunications, industrial automation, medical devices, and utilities, from entry-level to senior and lead, with specializations in systems installation, field service, and technical support. Scan the live roles below and apply to whichever ones fit.
Find Technical Field Engineer JobsStudent or new grad? View technical field engineer internships →Overview
Showing 5 of 196+ Technical Field Engineer jobs
DESCRIPTION
As a Mechatronics Technician (SMRT) on the Rapid Response Team, you provide hands-on mechanical and electrical support for Amazon's warehouse automation and MHE across multiple sites. This is a field-first role focused on the physical maintenance, repair, and replacement of mechanical and electrical components, keeping conveyance, sorters, and vertical lift systems running reliably. You are the on-the-floor technical resource that diagnoses and resolves equipment issues, installs and repairs automated equipment, supports go-lives and commissioning, and provides the hands-on coverage that remote support cannot. You will also design solutions for difficult problems and help mentor service and contract technicians, traveling to different locations to support them in person as demand requires.
Key job responsibilities
Replace and repair mechanical components: belts, rollers, bearings, chains, sprockets, gearmotors, forks, and carriers.
Perform electrical work: replace and rewire electrical components, change out VFDs (variable frequency drives), motors, power supplies, sensors, and photo eyes.
Troubleshoot electrical and mechanical faults in the field, isolating root cause across power, drives, and mechanical subsystems.
Rewire and correct wiring issues, following electrical drawings and ensuring proper terminations and labeling.
Execute belt installation, lacing, tracking, and tensioning on conveyor sections.
Perform mechanical alignment, squaring, leveling, and hardware torque / match-marking.
Support preventive maintenance (PM) execution per OEM Operations & Maintenance Manuals.
Provide on-site support during commissioning, go-lives, and break-fix events.
Document work performed, parts replaced, and follow runbooks for recovery procedures.
A day in the life
No two days look the same, and that's exactly what makes this role exciting. You start by looking at where you're needed most: which site has a PM coming due, which go-live needs hands-on support on the floor, or which SEV event needs a subject-matter expert on the ground to get the system back up. Once you know where the action is, you pack up and travel to the site to make it happen.
On any given day you might be rewiring a panel in the morning, swapping out a VFD or a motor before lunch, and changing a belt, roller, or gearmotor in the afternoon, whatever it takes to keep conveyance, sortation, and vertical lift systems running. You're the person other teams count on when a problem needs real hands-on expertise, not just a phone call. You troubleshoot, you fix it, you verify it's solid, and you leave the site better than you found it.
If you love variety, solving real problems with your hands, and being the expert everyone is glad to see walk through the door, this is the role for you.
BASIC QUALIFICATIONS
- 5+ years of repair of material handling equipment, or 5+ years of troubleshooting and diagnostics of material handling or production equipment experience
- Experience interpreting mechanical and electrical drawings
- Work flexible schedule including weekends, nights, and holidays
- 5+ years of demonstrating safety standards experience
- 5+ years of repairing material handling equipment (MHE), automated conveyor systems, and related mechanical/controls equipment experience
- 5+ years of electrical or mechanical experience
- Bachelor's degree in Electrical, Mechanical, Mechatronics, or a relevant field, or 7+ years of demonstrable experience working on the electrical and/or mechanical side of MHE with Amazon projects.
- Ability to safely use hand tools, power tools, and diagnostic instruments (multimeter, etc.).
- Ability to travel ~50% domestically, with the understanding that travel may increase based on demand, especially during onboarding, training, site ramp-ups, and go-lives.
PREFERRED QUALIFICATIONS
- Can work in cramped spaces or in elevated locations while adhering to health & safety guidelines
- Can lift and rack equipment up to 40 pounds
- Can bend or twist the body into unusual positions while working
- Stand and walk during shifts lasting up to 12 hours
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits.
USA, TX, McAllen - 39.28 - 45.19 USD hourly
USA, TX, Richardson - 39.27 - 45.19 USD hourly
DESCRIPTION
As a Mechatronics Technician (SMRT) on the Rapid Response Team, you provide hands-on mechanical and electrical support for Amazon's warehouse automation and MHE across multiple sites. This is a field-first role focused on the physical maintenance, repair, and replacement of mechanical and electrical components, keeping conveyance, sorters, and vertical lift systems running reliably. You are the on-the-floor technical resource that diagnoses and resolves equipment issues, installs and repairs automated equipment, supports go-lives and commissioning, and provides the hands-on coverage that remote support cannot. You will also design solutions for difficult problems and help mentor service and contract technicians, traveling to different locations to support them in person as demand requires.
Key job responsibilities
Replace and repair mechanical components: belts, rollers, bearings, chains, sprockets, gearmotors, forks, and carriers.
Perform electrical work: replace and rewire electrical components, change out VFDs (variable frequency drives), motors, power supplies, sensors, and photo eyes.
Troubleshoot electrical and mechanical faults in the field, isolating root cause across power, drives, and mechanical subsystems.
Rewire and correct wiring issues, following electrical drawings and ensuring proper terminations and labeling.
Execute belt installation, lacing, tracking, and tensioning on conveyor sections.
Perform mechanical alignment, squaring, leveling, and hardware torque / match-marking.
Support preventive maintenance (PM) execution per OEM Operations & Maintenance Manuals.
Provide on-site support during commissioning, go-lives, and break-fix events.
Document work performed, parts replaced, and follow runbooks for recovery procedures.
A day in the life
No two days look the same, and that's exactly what makes this role exciting. You start by looking at where you're needed most: which site has a PM coming due, which go-live needs hands-on support on the floor, or which SEV event needs a subject-matter expert on the ground to get the system back up. Once you know where the action is, you pack up and travel to the site to make it happen.
On any given day you might be rewiring a panel in the morning, swapping out a VFD or a motor before lunch, and changing a belt, roller, or gearmotor in the afternoon, whatever it takes to keep conveyance, sortation, and vertical lift systems running. You're the person other teams count on when a problem needs real hands-on expertise, not just a phone call. You troubleshoot, you fix it, you verify it's solid, and you leave the site better than you found it.
If you love variety, solving real problems with your hands, and being the expert everyone is glad to see walk through the door, this is the role for you.
BASIC QUALIFICATIONS
- 5+ years of repair of material handling equipment, or 5+ years of troubleshooting and diagnostics of material handling or production equipment experience
- Experience interpreting mechanical and electrical drawings
- Work flexible schedule including weekends, nights, and holidays
- 5+ years of demonstrating safety standards experience
- 5+ years of repairing material handling equipment (MHE), automated conveyor systems, and related mechanical/controls equipment experience
- 5+ years of electrical or mechanical experience
- Bachelor's degree in Electrical, Mechanical, Mechatronics, or a relevant field, or 7+ years of demonstrable experience working on the electrical and/or mechanical side of MHE with Amazon projects.
- Ability to safely use hand tools, power tools, and diagnostic instruments (multimeter, etc.).
- Ability to travel ~50% domestically, with the understanding that travel may increase based on demand, especially during onboarding, training, site ramp-ups, and go-lives.
PREFERRED QUALIFICATIONS
- Can work in cramped spaces or in elevated locations while adhering to health & safety guidelines
- Can lift and rack equipment up to 40 pounds
- Can bend or twist the body into unusual positions while working
- Stand and walk during shifts lasting up to 12 hours
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits.
USA, TX, McAllen - 39.28 - 45.19 USD hourly
USA, TX, Richardson - 39.27 - 45.19 USD hourly
Technical Field Engineer Jobs by Experience Level
See All 196+ Technical Field Engineer Jobs
Find roles that match your experience and apply in just a few clicks.
Find Technical Field Engineer JobsTechnical Field Engineer Job Market
Who's Hiring
- CaptiveAire20
- Apple9
- Amrize7
- Amazon5
- HP4
Top Industries Hiring
- Technology & Software
- Manufacturing
- Aerospace & Defense
- Distribution & Wholesale
- Construction & Real Estate
What Employers Look For
The qualifications that appear most often in technical field engineer jobs.
- Associate or bachelor's degree in electrical, mechanical, or related engineering technology
- Hands-on experience installing, maintaining, or troubleshooting complex technical systems
- Proficiency with diagnostic tools, test equipment, and manufacturer-specific software platforms
- Valid driver's license and willingness to travel to customer sites regularly
- Strong written and verbal communication skills for documenting field service reports
- Familiarity with OSHA safety standards and site safety protocols
Tips for Your Technical Field Engineer Job Search
Tailor your resume for field work
Hiring managers for technical field engineer roles want to see hands-on experience front and center. List specific equipment you've installed, configured, or repaired, and call out any travel availability or territory coverage, since those details filter candidates fast.
Lead with certifications on your resume
Certifications like CompTIA Network+, CCNA, or vendor-specific credentials from manufacturers you've worked with carry real weight. Put them in a dedicated section near the top, not buried in the footer, so recruiters spot them before they read your work history.
Apply early to roles that fit
Migrate Mate lists technical field engineer openings from across the United States in one place, so you can find roles that match and apply directly to each listing.
Filter by industry vertical not just title
The day-to-day work of a technical field engineer in medical devices is very different from one in telecom or industrial controls. Search by the vertical you know best so your application speaks directly to the equipment, compliance standards, and customer environments that employer deals with.
Prepare a site-visit scenario for interviews
Interviewers frequently ask you to walk through a real troubleshooting call or installation you handled. Prepare two or three concise stories that cover diagnosis, the fix, and how you kept the customer informed, since communication with on-site contacts is evaluated as heavily as technical skill.
Negotiate travel compensation separately
Many technical field engineer offers include a base salary plus a travel or vehicle allowance, and those are often negotiable even when the base is not. Ask specifically about per diem rates, mileage reimbursement, and whether overnight travel counts toward overtime before you accept.
Technical Field Engineer Jobs: Frequently Asked Questions
Which companies are hiring the most technical field engineers?
The companies hiring the most technical field engineers right now include CaptiveAire, Apple, and Amrize, with the largest share of openings in Texas, California, and Illinois, based on current listings on Migrate Mate as of November 2026. Demand tends to be highest in regions with heavy manufacturing, utility infrastructure, or large healthcare system networks.
How many technical field engineer jobs are remote?
About 38% of technical field engineer openings are fully remote or hybrid as of November 2026, reflecting the hands-on nature of most roles. The sub-areas most likely to offer remote or hybrid arrangements are technical support, pre-sales engineering, and software-driven diagnostics rather than installation or hardware maintenance roles.
How do you become a technical field engineer?
Most technical field engineers start with an associate or bachelor's degree in electrical technology, electronics, mechanical engineering technology, or a related field. From there, employers expect hands-on experience gained through internships, technician roles, or military service working with complex equipment. Earning vendor or industry certifications relevant to your target sector, such as networking, medical devices, or industrial controls, strengthens your candidacy significantly. Many engineers move into field roles after two to four years in a bench technician or inside support position.
Can you get a technical field engineer job with little experience?
Yes, entry-level technical field engineer roles do exist, particularly at companies that run structured training programs for new hires. Employers hiring at the entry level typically look for a relevant technical degree, any hands-on project work or internship experience with real equipment, and a demonstrated ability to troubleshoot independently. Focusing your applications on companies that sell and service their own proprietary hardware increases your chances, since they often invest in training candidates who show strong fundamentals rather than requiring deep prior experience.
What does the technical field engineer interview process look like?
The process typically starts with a recruiter or HR screen covering your background and travel availability, followed by a technical phone or video interview where you walk through past troubleshooting scenarios in detail. A hiring manager or senior engineer then conducts a deeper technical review, sometimes including a practical exercise or simulation of a field diagnostic problem. Final rounds often involve a panel with the regional team and may include a discussion of how you handle customer escalations on-site.
Where can I find and apply to technical field engineer jobs?
You can find and apply to technical field engineer jobs on Migrate Mate, which lists current openings from companies across the United States. Search for roles that match your experience, industry background, and preferred location, then apply directly to each listing that fits your background.
See All 196+ Technical Field Engineer Jobs
Find roles that match your experience and apply in just a few clicks.
Find Technical Field Engineer Jobs