Product Safety Engineer Jobs in District of Columbia
Product Safety Engineer jobs in District of Columbia are concentrated in the federal contracting corridor stretching from downtown Washington through Northern Virginia adjacent markets, where agencies and their prime contractors drive steady demand for compliance, hazard analysis, and product lifecycle safety work. Major employers with a lasting footprint here include Booz Allen Hamilton, Leidos, and General Dynamics, which regularly staff product safety engineers across defense and civilian agency programs. Demand is strongest in systems safety engineering, MIL-STD compliance, and consumer product regulatory affairs, with roles at every level from junior associate to principal engineer. See the openings below and apply to the ones that match your experience.
Find Product Safety Engineer JobsOverview
Showing 5 of 30+ Product Safety Engineer jobs
Summary
This position is with the U. S. Department of Labor, Occupational Safety and Health Administration (OSHA), within the Directorate of Construction (DOC), located in Washington, D.C.
- This position is at the full performance level.
- This position is inside the bargaining unit.
- This position is NOT remote. Selectee will be expected to report to the office above.
Learn more about this agency
This job is open to
The public
Career transition (CTAP, ICTAP, RPL)
Clarification from the agency
This vacancy is open to U.S. Citizens; Interagency Career Transition Assistance Program (ICTAP) and Career Transition Assistance Program (CTAP) eligibles in the local commuting area.
Duties
Duties for the Safety and Occupational Health Specialist include, but are not limited to the following:
- Representing OSHA programs to other government agencies, construction employers, labor representatives, and other stakeholders.
- Coordinating within DOC/OSHA as well as external organizations in preparation to support and facilitate national campaigns and other programs related to the operating and strategic goals.
- Conducting specialized surveys using quantitative or statistical methods to facilitate research on construction safety issues.
- Providing input on to improve directorate program policies, practices, and methods.
- Developing and recommending policies, compliance guidance and assistance to achieve program objectives.
Requirements
Conditions of employment
- Must be a U.S. Citizen.
- Must be at least 16 years old.
- Requires a probationary period if the requirement has not been met.
- Candidate required to obtain the necessary security/investigation level.
Qualifications
This series has an Individual Occupational Requirement (IOR):
Education: Undergraduate and Graduate Education: Major study - safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.
OR
Experience: (for positions above GS-5): Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include:
- Managing safety or occupational health program elements.
- Developing and recommending safety and occupational health policy to higher levels of management.
- Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements.
- Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards.
- Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses.
- Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards.
- Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards.
- Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects.
- Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.
Certificates:
Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience.
You must meet the Individual Occupational Requirement (IOR) listed above, and the Specialized Experience below to qualify for Safety & Occupational Health Manager, as described below.
Applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-12, in the Federal Service. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience.
Specialized Experience is the experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform the duties of the position successfully, and that is typically in or related to the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level. Specialized Experience is defined as:
- Proven experience working with electrical systems such as line power distribution, power generation, residential or commercial installations, etc. or demonstrated competency operating, maintaining, or planning lifts with construction cranes.
- Developing recommendations for precautions, preventative measures and/or solutions to expected/projected safety hazards.
- Providing advice on construction matters or processes to industry experts, committees, personnel in private industry, and/or stakeholders.
- Performing studies of significant or unusual construction safety issues to include use of cranes and/or derricks or electrical power system failure and/or electric shock incidents.
Education
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information.
Additional information
Applicants must meet all legal and regulatory requirements. Reference the Required Documents section for additional requirements.
The mission of the Department of Labor (DOL) is to protect the welfare of workers and job seekers, improve working conditions, expand high-quality employment opportunities, and assure work-related benefits and rights for all workers.
Refer to these links for more information: GENERAL INFORMATION, REASONABLE ACCOMMODATIONS, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES
As a condition of employment, all personnel must undergo a background investigation for access to DOL facilities, systems, information and/or classified materials before they can enter on duty: BACKGROUND INVESTIGATION
This position is inside the bargaining unit. If the duty location is within the Washington, D.C. metropolitan area, the position will be included in the Local 12, AFGE bargaining unit. If the duty location is outside the Washington, D.C. metropolitan area, the position will be included in the NCFLL bargaining unit.
For more information, click Telework Position Information. This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy.
Based on agency needs, additional positions may be filled using this vacancy.
The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click for more information on Pay, Leave, and Workforce Flexibilities.
The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act.
Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions.
All Department of Labor employees are subject to the provisions of the Drug-Free Workplace Program under Executive Order 12564 and Public Law 100-71.
Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation.
Click Application of Veterans Preference for more information.
You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/12996612
Clickhere for Evaluation details.
If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.
Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.
Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.
Category C - Meets the specialized experience described in the minimum qualification requirements section of this announcement and demonstrates proficiency in the basic competencies.
Clickhere for Evaluation details.
USA Hire
You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):
- Attention to Detail
- Customer Service
- Flexibility
- Integrity/Honesty
- Interpersonal Skills
- Learning
- Reading Comprehension
- Reasoning
- Self-Management
- Stress Tolerance
- Teamwork
The information you provide may be verified by a review of your paid, unpaid, volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.).
INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) who are Category B or higher will be considered well-qualified. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation.
When Occupational Safety and Health Administration completes its hiring, the remaining list of qualified candidates may be shared with additional federal agencies. You will have an opportunity to opt-in if you would like your name, application material, and assessment results shared to be considered for employment with additional agencies. There is no guarantee of further consideration, and you can continue to explore other job opportunity announcements.
Required Documents
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date.
- Resumes: Required and applicants must provide a resume either by creating one in USAJOBS or uploading one from your profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions and confirm that your resume supports your question responses.
- NOTE: In alignment with the Presidential Memorandum titled Merit Hiring Plan, dated May 29, 2025, applicants may only submit a resume limited to two (2) pages. Only the résumé uploaded under the 'Resume" document type in USAJOBS will be reviewed. If the resume submitted exceeds two (2) pages, the application will be deemed ineligible for further consideration.
- Veterans Documents (if applicable): To be considered as a 5-point (TP) preference eligible, you must submit a copy of your DD214, Certificate of Release or Discharge from Active Duty. Your DD 214 must show the type of discharge and dates of active duty. To claim 10-point (CP/CPS, XP) preference, you must submit a copy of your DD214 and the proof of entitlement of this preference, which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. In addition, a Standard Form (SF-15) should be included, but is not required. (For active-duty service members expecting honorable or general discharge or release within 120 days, click Tentative Preference for Active Duty). For more information, go to Feds Hire Vets - Veterans Preference.
- Displaced Employee Placement Documents: Only required if requesting priority consideration under CTAP or ICTAP eligibility.
- Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PhD, etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB.
NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED if you are selected, and prior to receiving the firm offer with a start date.
Cover Letters are not mandatory and will not be used to verify experience but may be submitted.
Do not upload password-protected documents.
As a condition of employment for accepting this position, you may be required to serve a 1 year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services.
To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section.
Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration.
Important - Save your information before the 30-minute system timeout! For help, go to the USAJOBS Help Center.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS). Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button.
STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy.
STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button.
STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, thenUpdate Application.
If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice.
- Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials.
- Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended.
- Set aside about 2 hours to take the USA Hire Assessment, however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link.
- Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused.
To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed.
To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.
NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.
For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.
Agency contact information
200 Constitution Avenue NW
Washington, DC 20210
US
Next steps
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interviews. You will be notified of the outcome. A selection is expected to be made within 30 calendar days of the issuance date of the certificate.
For instructions on how to check the status of your application, go to USAJOBS Help Guide.
USAJOBS will no longer send status alert email notifications. You can check your application status in the TAS by logging into USAJOBS and in the Applicant Dashboard, click the hiring agency Talent Acquisition System (TAS). If the TAS does not provide application tracking information, contact the agency's point of contact on the job announcement.
To verify that your application is complete, log into your USAJOBS account, select the Application Status link, and then select the more information link for this position. The Application page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process. To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
Overview
- 0018 Safety and Occupational Health Management
- Credentialing
- Suitability/Fitness
Summary
This position is with the U. S. Department of Labor, Occupational Safety and Health Administration (OSHA), within the Directorate of Construction (DOC), located in Washington, D.C.
- This position is at the full performance level.
- This position is inside the bargaining unit.
- This position is NOT remote. Selectee will be expected to report to the office above.
Learn more about this agency
This job is open to
The public
Career transition (CTAP, ICTAP, RPL)
Clarification from the agency
This vacancy is open to U.S. Citizens; Interagency Career Transition Assistance Program (ICTAP) and Career Transition Assistance Program (CTAP) eligibles in the local commuting area.
Duties
Duties for the Safety and Occupational Health Specialist include, but are not limited to the following:
- Representing OSHA programs to other government agencies, construction employers, labor representatives, and other stakeholders.
- Coordinating within DOC/OSHA as well as external organizations in preparation to support and facilitate national campaigns and other programs related to the operating and strategic goals.
- Conducting specialized surveys using quantitative or statistical methods to facilitate research on construction safety issues.
- Providing input on to improve directorate program policies, practices, and methods.
- Developing and recommending policies, compliance guidance and assistance to achieve program objectives.
Requirements
Conditions of employment
- Must be a U.S. Citizen.
- Must be at least 16 years old.
- Requires a probationary period if the requirement has not been met.
- Candidate required to obtain the necessary security/investigation level.
Qualifications
This series has an Individual Occupational Requirement (IOR):
Education: Undergraduate and Graduate Education: Major study - safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.
OR
Experience: (for positions above GS-5): Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include:
- Managing safety or occupational health program elements.
- Developing and recommending safety and occupational health policy to higher levels of management.
- Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements.
- Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards.
- Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses.
- Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards.
- Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards.
- Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects.
- Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.
Certificates:
Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience.
You must meet the Individual Occupational Requirement (IOR) listed above, and the Specialized Experience below to qualify for Safety & Occupational Health Manager, as described below.
Applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-12, in the Federal Service. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience.
Specialized Experience is the experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform the duties of the position successfully, and that is typically in or related to the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level. Specialized Experience is defined as:
- Proven experience working with electrical systems such as line power distribution, power generation, residential or commercial installations, etc. or demonstrated competency operating, maintaining, or planning lifts with construction cranes.
- Developing recommendations for precautions, preventative measures and/or solutions to expected/projected safety hazards.
- Providing advice on construction matters or processes to industry experts, committees, personnel in private industry, and/or stakeholders.
- Performing studies of significant or unusual construction safety issues to include use of cranes and/or derricks or electrical power system failure and/or electric shock incidents.
Education
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information.
Additional information
Applicants must meet all legal and regulatory requirements. Reference the Required Documents section for additional requirements.
The mission of the Department of Labor (DOL) is to protect the welfare of workers and job seekers, improve working conditions, expand high-quality employment opportunities, and assure work-related benefits and rights for all workers.
Refer to these links for more information: GENERAL INFORMATION, REASONABLE ACCOMMODATIONS, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES
As a condition of employment, all personnel must undergo a background investigation for access to DOL facilities, systems, information and/or classified materials before they can enter on duty: BACKGROUND INVESTIGATION
This position is inside the bargaining unit. If the duty location is within the Washington, D.C. metropolitan area, the position will be included in the Local 12, AFGE bargaining unit. If the duty location is outside the Washington, D.C. metropolitan area, the position will be included in the NCFLL bargaining unit.
For more information, click Telework Position Information. This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy.
Based on agency needs, additional positions may be filled using this vacancy.
The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click for more information on Pay, Leave, and Workforce Flexibilities.
The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act.
Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions.
All Department of Labor employees are subject to the provisions of the Drug-Free Workplace Program under Executive Order 12564 and Public Law 100-71.
Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation.
Click Application of Veterans Preference for more information.
You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/12996612
Clickhere for Evaluation details.
If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.
Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.
Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.
Category C - Meets the specialized experience described in the minimum qualification requirements section of this announcement and demonstrates proficiency in the basic competencies.
Clickhere for Evaluation details.
USA Hire
You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):
- Attention to Detail
- Customer Service
- Flexibility
- Integrity/Honesty
- Interpersonal Skills
- Learning
- Reading Comprehension
- Reasoning
- Self-Management
- Stress Tolerance
- Teamwork
The information you provide may be verified by a review of your paid, unpaid, volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.).
INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) who are Category B or higher will be considered well-qualified. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation.
When Occupational Safety and Health Administration completes its hiring, the remaining list of qualified candidates may be shared with additional federal agencies. You will have an opportunity to opt-in if you would like your name, application material, and assessment results shared to be considered for employment with additional agencies. There is no guarantee of further consideration, and you can continue to explore other job opportunity announcements.
Required Documents
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date.
- Resumes: Required and applicants must provide a resume either by creating one in USAJOBS or uploading one from your profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions and confirm that your resume supports your question responses.
- NOTE: In alignment with the Presidential Memorandum titled Merit Hiring Plan, dated May 29, 2025, applicants may only submit a resume limited to two (2) pages. Only the résumé uploaded under the 'Resume" document type in USAJOBS will be reviewed. If the resume submitted exceeds two (2) pages, the application will be deemed ineligible for further consideration.
- Veterans Documents (if applicable): To be considered as a 5-point (TP) preference eligible, you must submit a copy of your DD214, Certificate of Release or Discharge from Active Duty. Your DD 214 must show the type of discharge and dates of active duty. To claim 10-point (CP/CPS, XP) preference, you must submit a copy of your DD214 and the proof of entitlement of this preference, which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. In addition, a Standard Form (SF-15) should be included, but is not required. (For active-duty service members expecting honorable or general discharge or release within 120 days, click Tentative Preference for Active Duty). For more information, go to Feds Hire Vets - Veterans Preference.
- Displaced Employee Placement Documents: Only required if requesting priority consideration under CTAP or ICTAP eligibility.
- Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PhD, etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB.
NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED if you are selected, and prior to receiving the firm offer with a start date.
Cover Letters are not mandatory and will not be used to verify experience but may be submitted.
Do not upload password-protected documents.
As a condition of employment for accepting this position, you may be required to serve a 1 year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services.
To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section.
Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration.
Important - Save your information before the 30-minute system timeout! For help, go to the USAJOBS Help Center.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS). Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button.
STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy.
STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button.
STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, thenUpdate Application.
If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice.
- Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials.
- Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended.
- Set aside about 2 hours to take the USA Hire Assessment, however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link.
- Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused.
To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed.
To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.
NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.
For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.
Agency contact information
200 Constitution Avenue NW
Washington, DC 20210
US
Next steps
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interviews. You will be notified of the outcome. A selection is expected to be made within 30 calendar days of the issuance date of the certificate.
For instructions on how to check the status of your application, go to USAJOBS Help Guide.
USAJOBS will no longer send status alert email notifications. You can check your application status in the TAS by logging into USAJOBS and in the Applicant Dashboard, click the hiring agency Talent Acquisition System (TAS). If the TAS does not provide application tracking information, contact the agency's point of contact on the job announcement.
To verify that your application is complete, log into your USAJOBS account, select the Application Status link, and then select the more information link for this position. The Application page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process. To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
Overview
- 0018 Safety and Occupational Health Management
- Credentialing
- Suitability/Fitness
See All 30 Product Safety Engineer Jobs in District of Columbia
Find roles in District of Columbia that match your experience and apply in just a few clicks.
Find Product Safety Engineer JobsProduct Safety Engineer Jobs by City in District of Columbia
Where District of Columbia roles are concentrated, by current openings.
Product Safety Engineer Job Market in District of Columbia
A snapshot from current District of Columbia openings, updated as new roles post.
Who's Hiring
- FAS2
- Aldridge Electric2
- The National Academies2
- US Department of Labor2
- Axon1
Top Industries Hiring
- Technology & Software3
- Consulting & Professional Services3
- Construction & Real Estate2
- Retail1
- Manufacturing1
What District of Columbia Employers Look For
The qualifications that appear most often in product safety engineer jobs across District of Columbia.
- Bachelor's degree in systems engineering, mechanical engineering, or a closely related field
- Experience applying MIL-STD-882 or equivalent system safety standards on federal programs
- Professional certification such as System Safety Society Associate or Certified Safety Professional preferred
- Active or adjudicable U.S. government security clearance for federal contracting roles
- Familiarity with FAR and DFARS regulatory requirements relevant to product safety compliance
- Proficiency with hazard analysis tools including fault tree analysis and failure mode and effects analysis
Product Safety Engineer Jobs in District of Columbia: Frequently Asked Questions
How do you become a product safety engineer in District of Columbia?
Product safety engineering in District of Columbia does not require a District of Columbia-issued professional license specific to the title, but the dominant federal contracting market sets its own concrete bar. Most employers expect a bachelor's degree in systems, mechanical, or electrical engineering, familiarity with MIL-STD-882 system safety methodology, and often a security clearance. Earning a Certified Safety Professional credential from the Board of Certified Safety Professionals or a System Safety Engineering Certificate strengthens candidacy considerably in the local market.
Which companies hire product safety engineers in District of Columbia?
Companies currently hiring product safety engineers in District of Columbia include FAS, Aldridge Electric, and The National Academies, per current listings on Migrate Mate as of July 2026. The District of Columbia market is especially concentrated among large defense and federal IT contractors whose programs require continuous safety engineering support across long-running government contracts.
Which District of Columbia cities have the most product safety engineer jobs?
The cities with the most product safety engineer openings in District of Columbia are Washington and Washington. The distribution reflects Washington's role as the hub of federal agency headquarters, with adjacent areas drawing openings from major defense and civilian contractors whose offices cluster near agency clients along the I-495 and I-66 corridors.
Are there remote product safety engineer jobs in District of Columbia?
Yes, but they're less common than in purely analytical roles because product safety engineering frequently involves hands-on hardware reviews, classified program work, and on-site government facility access. About 41% of product safety engineer openings tied to District of Columbia are remote or hybrid as of July 2026. The tasks most amenable to remote work include documentation, hazard analysis report writing, and standards research.
How can I get hired as a product safety engineer in District of Columbia with little or no experience?
The most realistic entry path is through a systems engineering or safety analyst associate role at one of the large federal contractors based in the District of Columbia area, such as Booz Allen Hamilton or Leidos, which run structured new-graduate hiring programs and often place candidates without direct safety experience on teams where they learn MIL-STD-882 on the job. Lateral moves from quality assurance, mechanical engineering, or test engineering roles are common. Pursuing a Certified Safety Professional associate designation early and obtaining a security clearance eligibility determination gives candidates a measurable edge.
Where can I find and apply to product safety engineer jobs in District of Columbia?
You can find and apply to product safety engineer jobs in District of Columbia on Migrate Mate, which lists current openings in the District of Columbia market. Search the listings, identify the roles that fit your background and experience level, and apply directly to the ones that match.
See All 30 Product Safety Engineer Jobs in District of Columbia
Find roles in District of Columbia that match your experience and apply in just a few clicks.
Find Product Safety Engineer Jobs