Stationary Engineer Visa Sponsorship Jobs in Maryland
Stationary engineer visa sponsorship jobs in Maryland are concentrated in Baltimore's hospital systems, federal facilities, and large commercial campuses in the Baltimore-Washington corridor. Employers like Johns Hopkins Health System, the University of Maryland Medical Center, and major federal contractors regularly seek licensed stationary engineers to operate and maintain high-capacity HVAC, boiler, and power systems.
Find Stationary Engineer JobsOverview
Showing 5 of 6+ Stationary Engineer Jobs in Maryland with Visa Sponsorship










See all Stationary Engineer Jobs in Maryland with Visa Sponsorship
Sign up for free to unlock all listings, filter by visa type, and get alerts for new Stationary Engineer Jobs in Maryland with Visa Sponsorship.
Get Access To All Jobs
General Summary
The Stationary Engineer is responsible for the operation of all central energy plant utility systems, including high-pressure steam boilers, hot-water boilers, heat-recovery chillers, centrifugal refrigeration chillers, cooling towers, centrifugal air compressors, medical compressed air, and HVAC systems. The Stationary Engineer must have multi-craft skills (mechanical, electrical, and plumbing) and be able to troubleshoot and repair a wide variety of equipment. The Stationary Engineer is expected to complete preventive maintenance on equipment and identify/implement continuous improvement opportunities.
Essential Duties and Responsibilities
- Responsible for maintaining the safe and efficient operation of equipment, including boilers, chillers, centrifugal air compressors, cooling towers, pumps, steam, chilled water, and HVAC systems.
- Adjusts controls to ensure safe, efficient operation of systems to meet facility demands.
- Logs various aspects of the system’s operation.
- Monitors and logs temperature, hours of operation, fuel consumption, and water levels.
- Feed chemicals and caustics into systems and devices, then record and report actions taken.
- Observe the results of water tests.
- May direct and coordinate activities of other workers in performing tasks directly related to operating and maintaining the system or systems.
- Responds to calls for emergency repairs.
- Conducts routine inspections of mechanical equipment (such as hot water boilers, which heat water for building use; high-pressure steam boilers, which generate steam for heating or industrial processes; centrifugal chillers, which cool water for air conditioning; pumps to move fluids; controls that automate equipment; cooling towers that disperse heat; and variable frequency drives (VFDs), which regulate the speed of motors).
- Performs minor repairs or replaces broken or worn parts on mechanical equipment.
- Maintain logs of all completed work.
- Maintain a clean, safe, and orderly work area.
- Study manuals and journals to increase technical competency.
- Have expertise in mechanical, electrical, and control systems to identify and repair equipment issues.
- Follow safety and LOTO procedures.
- Conduct routine audits of operating equipment.
- Maintain open, professional communication with associates.
- Conduct routine maintenance activities.
- Inspect and monitor equipment condition.
- Spot and pursue improvement opportunities.
- Complete scheduled preventive maintenance (regular checks and minor repairs to prevent issues) and/or planned work orders (scheduled maintenance tasks).
- Provide assistance during routine shutdowns.
- Performs preventive (proactive inspections and minor repairs to avoid breakdowns) and corrective (repairs after an issue has occurred) maintenance on the mechanical production and distribution systems (systems that generate and distribute steam, hot water, or chilled water in the facility).
- Maintain inspection and testing records.
- Assesses the condition of MEP (Mechanical, Electrical, and Plumbing) systems and recommends actions for repair or replacement.
- Assist outside contractors performing scheduled maintenance or repairs.
- Responds to emergency events, assesses the situation, and takes appropriate action to stabilize the situation.
- Traces out proposed utility service shutdowns, identifies affected areas, and initiates shutdowns and reactivation.
- Monitors outside contractor repairs and records observed deficiencies on the punch list.
- Participates in new system start-up, training, and commissioning.
Knowledge, Experience, and Skill Requirements
- Must hold a Maryland Grade 2 Stationary Engineer license.
- Individuals performing operations, repairs, maintenance, modifications, and installations of the Facility's Central Energy Plant (CEP) steam and chilled water generating systems and associated controls shall be qualified "Stationary Engineer" possessing and maintaining a current "Grade 2" or equivalent license approved by the COR. This license shall be a Maryland Stationary Engineer Grade 2 license or equivalent as approved by the COR.
- Must be able to pass the Federal background check required for this job site.
- Ability to perform work safely under hazardous conditions.
- Able to troubleshoot and repair most complex problems.
- Better-than-average knowledge of software programs, including Word, Excel, PowerPoint, and Outlook, is required.
- Excellent oral and written communication skills.
- High school graduate; technical or trade school certificate in a related field desired.
- Basic construction knowledge.
- Ability to read blueprints.
- NIULPE Grade 2 certification.
Work Environment
- Must be able to lift 50 lbs., squat, bend, stoop, and kneel for short periods, climb a ladder, stand for long periods of time, and perform constant arm extensions.
- Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards, with the likely result being cuts, bruises, etc.
- Must be able to pass a local background check and have the ability to obtain and maintain NAC/LAC clearance (National Agency Check/Local Agency Check—security clearances required for access) after hire.
Disclaimer
CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $46.85. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements.
This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job.
THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Stationary Engineer Job Roles in Maryland
See all Stationary Engineer Jobs in Maryland
Sign up for free to filter by visa type, set job alerts, and find employers with verified sponsorship history.
Search Stationary Engineer Jobs in MarylandStationary Engineer Jobs in Maryland: Frequently Asked Questions
Which companies sponsor visas for stationary engineers in Maryland?
Maryland's largest stationary engineer employers include Johns Hopkins Health System, University of Maryland Medical Center, MedStar Health, federal agencies with large campus infrastructure, and commercial real estate operators in the Baltimore-Washington corridor. These organizations operate complex mechanical systems requiring licensed stationary engineers and have documented histories of sponsoring skilled trades workers for roles that meet visa eligibility requirements.
Which visa types realistically fit stationary engineer roles in Maryland?
H-2B visa is the most common path for temporary stationary engineer placements, covering seasonal or project-based needs where no available U.S. workers can be found. Stationary engineers pursuing permanent residence can be sponsored through EB-3 skilled worker green cards, which require at least two years of experience. Canadian and Mexican citizens who hold an engineering degree may qualify under TN visa status as engineers under the USMCA profession list. F-1 students in relevant fields may work temporarily through OPT.
Which cities in Maryland have the most stationary engineer sponsorship jobs?
Baltimore is the dominant market, driven by its concentration of major hospital systems, universities, and large commercial and industrial facilities. Bethesda and Rockville see demand from federal health agencies, including NIH and Walter Reed-affiliated campuses. College Park and Greenbelt attract stationary engineers for large government research installations. The I-270 technology corridor and the Port of Baltimore also generate consistent demand for licensed stationary engineers.
How to find stationary engineer visa sponsorship jobs in Maryland?
Migrate Mate lists Maryland stationary engineer roles specifically filtered to employers with verified visa sponsorship history, so you can focus on facilities already familiar with the process rather than testing employers who have never sponsored before. Search by city to target Baltimore hospital campuses or the federal corridors around Bethesda and Rockville. Migrate Mate's database is updated continuously so sponsorship opportunities reflect current employer activity.
Are there state-specific factors that affect stationary engineer visa sponsorship in Maryland?
Maryland requires stationary engineers to hold a state-issued operating license for certain boiler and pressure vessel systems, particularly in healthcare and industrial settings. Employers sponsoring foreign workers will typically need candidates who can obtain or already hold this license. Maryland's proximity to federal agencies and research institutions also means many stationary engineer roles may require background checks or security clearances, which can affect the sponsorship timeline and employer willingness to sponsor international candidates.
What is the prevailing wage for sponsored stationary engineer jobs in Maryland?
U.S. employers sponsoring a visa must pay at least the prevailing wage, which is what workers in the same role, area, and experience level typically earn. The Department of Labor sets this rate to make sure companies aren't hiring foreign workers simply because they'd accept lower pay than a U.S. worker. It varies by job title, location, and experience. You can look up current prevailing wage rates for any occupation and location using the OFLC Wage Search page.