Automation Jobs in Delaware
Automation jobs in Delaware are active across the state's chemical manufacturing, pharmaceutical, and advanced logistics sectors, with openings at every level from technicians to senior engineers. The heaviest hiring concentrates in Wilmington, Newark, and the Claymont corridor, where established employers like DuPont, AstraZeneca, and Amazon operate large facilities requiring automation expertise. The most in-demand specialties right now are PLC programming, industrial robotics integration, and process control systems. Scan the live roles below and apply to whichever ones fit.
Find Automation JobsOverview
Showing 4 of 16+ Automation jobs
- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.
- Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.
- Provide reviews/design input of P&C drawings for SCADA system requirements.
- Develop points lists for data transferred between RTUs, IEDs, and master station connections.
- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)
- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)
- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)
- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.
- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)
- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).
- Develop SCADA system and Network documentation for projects.
- Develop automation tools to improve project efficiency (python, etc.)
- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.
- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).
- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design.
- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.”
- Provide guidance as a mentor in the development of less experienced engineers.
- There is the potential for you to travel to client and vendor offices as needed.
Essential skills and experience:
- Bachelor’s degree in Electrical, Electronic, Telecommunications, or Computer Systems Engineering.
- 8 years of experience in design, configuration, implementation, and troubleshooting of substation SCADA and communication systems.
- Experience with SEL, Novatech, & GE RTUs and software.
- Basic understanding of LAN/WAN devices and topology.
- Knowledge of DNP, Modbus, SEL, IEC-61850 (MMS/Goose) protocols – serial & IP based.
- Proficiency with MS Office applications.
- Ability & willingness to travel up to 30%.
- Professional Engineering (P.E.) License.
- Master of Science degree in Electrical, Electronic, Telecommunications, or Computer Systems Engineering.
- Experience with communication troubleshooting software/hardware (ASE Test Set, Wireshark, etc.)
- Protective relay settings experience (SEL, GE, ABB etc.)
- Radio communications experience.
- Network design credentials, applied knowledge of IP / MPLS.
- Well versed in use of MS Project & Visio.
- Project Management Professional (PMP).
- Familiar with NERC Critical Infrastructure Protection (CIP) standards & Cyber-Security.
- CISSP certification.
We value candidates who demonstrate an interest in learning and effectively using emerging technologies where relevant to their role. Employees remain accountable for their work and are expected to apply appropriate professional judgment and review when using technology-assisted tools.
Experience with AI, automation, programming, or similar technologies is valued where relevant but is not required unless specifically identified elsewhere in the job description.
At Sargent & Lundy, we care about the health and well-being of our employees. Our commitment extends beyond the workplace, offering comprehensive healthcare plans and generous paid time off to support our team members in every aspect of their lives. We understand the importance of work-life balance, which is why we are proud to provide competitive, award-winning benefits. Our dedication to employee satisfaction has earned us the prestigious Top Workplaces Culture Excellence Award for compensation and benefits in 2022, 2023, and 2024.
Health & Wellness
- Health Plans: Medical, Dental, Vision
- Life & Accident Insurance
- Disability Coverage
- Employee Assistance Program (EAP)
- Back-Up Daycare
- FSA & HSA
- 401(k)
- Pre-Tax Commuter Account
- Merit Scholarship Program
- Employee Discount Program
- Corporate Charitable Giving Program
- Tuition Assistance
- First Professional Licensure Bonus
- Employee Referral Bonus
- Paid Annual Personal/Sick Time (PST)
- Paid Vacation
- Paid Holidays
- Paid Parental Leave
- Paid Bereavement Leave
- Flexible Work Arrangements
- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.
- Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.
- Provide reviews/design input of P&C drawings for SCADA system requirements.
- Develop points lists for data transferred between RTUs, IEDs, and master station connections.
- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)
- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)
- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)
- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.
- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)
- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).
- Develop SCADA system and Network documentation for projects.
- Develop automation tools to improve project efficiency (python, etc.)
- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.
- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).
- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design.
- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.”
- Provide guidance as a mentor in the development of less experienced engineers.
- There is the potential for you to travel to client and vendor offices as needed.
Essential skills and experience:
- Bachelor’s degree in Electrical, Electronic, Telecommunications, or Computer Systems Engineering.
- 8 years of experience in design, configuration, implementation, and troubleshooting of substation SCADA and communication systems.
- Experience with SEL, Novatech, & GE RTUs and software.
- Basic understanding of LAN/WAN devices and topology.
- Knowledge of DNP, Modbus, SEL, IEC-61850 (MMS/Goose) protocols – serial & IP based.
- Proficiency with MS Office applications.
- Ability & willingness to travel up to 30%.
- Professional Engineering (P.E.) License.
- Master of Science degree in Electrical, Electronic, Telecommunications, or Computer Systems Engineering.
- Experience with communication troubleshooting software/hardware (ASE Test Set, Wireshark, etc.)
- Protective relay settings experience (SEL, GE, ABB etc.)
- Radio communications experience.
- Network design credentials, applied knowledge of IP / MPLS.
- Well versed in use of MS Project & Visio.
- Project Management Professional (PMP).
- Familiar with NERC Critical Infrastructure Protection (CIP) standards & Cyber-Security.
- CISSP certification.
We value candidates who demonstrate an interest in learning and effectively using emerging technologies where relevant to their role. Employees remain accountable for their work and are expected to apply appropriate professional judgment and review when using technology-assisted tools.
Experience with AI, automation, programming, or similar technologies is valued where relevant but is not required unless specifically identified elsewhere in the job description.
At Sargent & Lundy, we care about the health and well-being of our employees. Our commitment extends beyond the workplace, offering comprehensive healthcare plans and generous paid time off to support our team members in every aspect of their lives. We understand the importance of work-life balance, which is why we are proud to provide competitive, award-winning benefits. Our dedication to employee satisfaction has earned us the prestigious Top Workplaces Culture Excellence Award for compensation and benefits in 2022, 2023, and 2024.
Health & Wellness
- Health Plans: Medical, Dental, Vision
- Life & Accident Insurance
- Disability Coverage
- Employee Assistance Program (EAP)
- Back-Up Daycare
- FSA & HSA
- 401(k)
- Pre-Tax Commuter Account
- Merit Scholarship Program
- Employee Discount Program
- Corporate Charitable Giving Program
- Tuition Assistance
- First Professional Licensure Bonus
- Employee Referral Bonus
- Paid Annual Personal/Sick Time (PST)
- Paid Vacation
- Paid Holidays
- Paid Parental Leave
- Paid Bereavement Leave
- Flexible Work Arrangements
See All 16 Automation Jobs in Delaware
Find roles in Delaware that match your experience and apply in just a few clicks.
Find Automation JobsAutomation Jobs by City in Delaware
Where Delaware roles are concentrated, by current openings.
Automation Job Market in Delaware
A snapshot from current Delaware openings, updated as new roles post.
Who's Hiring
What Delaware Employers Look For
The qualifications that appear most often in automation jobs across Delaware.
- Proficiency with PLC platforms such as Allen-Bradley or Siemens required by most Delaware employers
- Bachelor's degree in electrical engineering, mechatronics, or a related technical field preferred
- Hands-on experience with SCADA systems and industrial control networks strongly expected
- Familiarity with FDA or GMP compliance standards valued in Delaware's pharmaceutical and biotech facilities
- Ability to read and interpret electrical schematics, P&ID drawings, and technical documentation
- Strong troubleshooting skills for mechanical, electrical, and software components in automated systems
Automation Jobs in Delaware: Frequently Asked Questions
How do you become a automation in Delaware?
Most automation roles in Delaware require a technical degree in electrical engineering, mechatronics, controls engineering, or a closely related field from an accredited program. Delaware does not issue a state-specific license for automation engineers, so employers focus on certifications like ISA Certified Control Systems Technician or vendor credentials from Rockwell or Siemens. Graduates from the University of Delaware or Delaware Technical Community College with hands-on lab or internship experience in PLC programming move quickly into open roles.
Which companies hire automations in Delaware?
Employers hiring automations in Delaware right now include Berkley, Sargent & Lundy, and Electrical Automation Services, based on current listings on Migrate Mate as of November 2026. Delaware's concentration of chemical, pharmaceutical, and fulfillment operations means demand is consistent across both large corporate campuses and contract manufacturing organizations throughout New Castle County.
Which Delaware cities have the most automation jobs?
Wilmington, Newark, and Lewes account for the largest share of automation openings in Delaware. Wilmington and Newark lead because of the dense presence of pharmaceutical, chemical, and advanced manufacturing employers along the I-95 and Route 1 corridors, while smaller suburban and industrial areas near those hubs generate additional openings tied to distribution and contract manufacturing operations.
Are there remote automation jobs in Delaware?
Yes, but they're rare. Automation work is largely hands-on, requiring on-site access to equipment, control panels, and production lines that cannot be managed remotely. About 75% of automation openings tied to Delaware are remote or hybrid as of November 2026, and those tend to be in systems design, software configuration, or project management roles rather than floor-level maintenance and commissioning work.
How can I get hired as a automation in Delaware with little or no experience?
The most realistic entry path is an associate or bachelor's program in industrial technology or electrical engineering technology at Delaware Technical Community College, which places graduates directly with New Castle County manufacturers. Large Delaware employers and contract facilities often hire automation technician trainees who complete in-house PLC training programs. Coming in from an adjacent role like maintenance electrician, instrumentation technician, or quality control technician is a common lateral move. Earning an ISA CCST certification before applying gives candidates a measurable edge over those with only coursework.
Where can I find and apply to automation jobs in Delaware?
You can find and apply to automation jobs in Delaware on Migrate Mate, which lists current Delaware openings updated in real time. Search the listings, identify the roles that match your background and location, and apply directly to the ones that fit.
See All 16 Automation Jobs in Delaware
Find roles in Delaware that match your experience and apply in just a few clicks.
Find Automation Jobs