Manufacturing Engineer Jobs at Shermco Industries with Visa Sponsorship
Shermco Industries hires Manufacturing Engineers across medical device operations, where precision, compliance, and process improvement drive the work. The company has a track record of supporting international candidates through employer-sponsored visa pathways, making it a practical target if you're building a U.S. career in medical device manufacturing.
See All Manufacturing Engineer at Shermco Industries JobsOverview
Showing 5 of 47+ Manufacturing Engineer Jobs at Shermco Industries jobs
Have you applied for this role?
Have you applied for this role?
Have you applied for this role?
Have you applied for this role?
Have you applied for this role?
See all 47+ Manufacturing Engineer Jobs at Shermco Industries
Sign up for free to unlock all listings, filter by visa type, and get alerts for new Manufacturing Engineer Jobs at Shermco Industries.
Get Access To All JobsOverview
Job Title: Commissioning Engineer
Locations: Pittsburgh, PA, Philadelphia, PA, Cleveland, OH, & Columbus, OH
The Commissioning Engineer will be responsible for overseeing the installation, testing, and commissioning of various systems and equipment. This includes ensuring that all systems are installed and functioning properly, conducting tests to verify system performance, and troubleshooting any issues that arise during the commissioning process.
Shermco Industries is seeking a Commissioning Engineer.
Responsibilities
- Actively promotes safe working practices along with human performance improvement (HPI) daily.
- Leads and/or participates on completing Job Hazard Analysis with assigned team each workday.
- Perform installation, commissioning, testing, and maintenance of protective relay equipment, powerline carrier equipment, digital fault recorders (DFR’s), and remote terminal units (RTU’s).
- Perform functional testing for protection and control circuitry associated with transmission lines, HV bus, transformer, circuit breaker, feeder, reactors, and capacitor banks.
- Perform end to end testing of communication aided tripping schemes for both fiber systems and powerline carrier using RTS, ProTest, or Protection Suite software.
- Familiar with testing and calibrating GE and Westinghouse/ABB electromechanical relays.
- Experienced with commissioning SEL microprocessor relays such as 311C, 311L, 387, 411L, 421, 487B, 487E, 487V, 587, 587Z, and 787.
- Experienced with commissioning GE microprocessor relays such as C30, D60, F35, L90, T35 and T60.
- Support RTU upgrade projects for various clients.
- Accurately documenting and submitting test reports used for client reporting and regulatory purposes.
- Interpret one line, three line, wiring, and schematic diagrams with ability to recognize and bring attention to discrepancies.
- Accurately completes time and expense reports along with maintaining good condition of assigned company vehicle.
Qualifications
- Willingness to travel overnight (up to 95%).
- Ideal candidate will have 4+ years experience in the electrical testing industry with a focus working with protection and control equipment with HV utility, co-op, power generation, federal, or municipal clients.
- Provide oversight of protection and control technicians and engineers.
- Bachelor of Science in Electrical Engineering or Electrical Engineering Technology.
- Proven experience with transmission and distribution relays to include SEL, GE, ABB, and Westinghouse.
- Familiarity with test equipment to include Doble 6150, Powercomm PCA-4125A, Arbiter 931, Vanguard CT 2000C, Omicron CT analyzer.
- Experienced in using test software such as RTS, ProTest, or Protection Suite.
- Experienced in developing detailed commissioning test plans.
- Experience performing relay end to end testing to verify communication assisted tripping schemes such as differential, DCB, POTT, and transfer trip.
- Strong understanding of safe work practices and human performance improvement applicable to protection and control work in utility high voltage substations.
- Capable of performing in-service load checks for new equipment to validate correctness of operation.
- Familiar with NERC PRC-005-6 requirements related to protection systems, automatic reclosing, and sudden pressure relaying maintenance.
EQUAL OPPORTUNITY EMPLOYER | DRUG-FREE WORKPLACE
Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace.
NO AGENCIES PLEASE
Pay Range
USD $80.00 - USD $85.00 /Hr.
Overview
Job Title: Commissioning Engineer
Locations: Pittsburgh, PA, Philadelphia, PA, Cleveland, OH, & Columbus, OH
The Commissioning Engineer will be responsible for overseeing the installation, testing, and commissioning of various systems and equipment. This includes ensuring that all systems are installed and functioning properly, conducting tests to verify system performance, and troubleshooting any issues that arise during the commissioning process.
Shermco Industries is seeking a Commissioning Engineer.
Responsibilities
- Actively promotes safe working practices along with human performance improvement (HPI) daily.
- Leads and/or participates on completing Job Hazard Analysis with assigned team each workday.
- Perform installation, commissioning, testing, and maintenance of protective relay equipment, powerline carrier equipment, digital fault recorders (DFR’s), and remote terminal units (RTU’s).
- Perform functional testing for protection and control circuitry associated with transmission lines, HV bus, transformer, circuit breaker, feeder, reactors, and capacitor banks.
- Perform end to end testing of communication aided tripping schemes for both fiber systems and powerline carrier using RTS, ProTest, or Protection Suite software.
- Familiar with testing and calibrating GE and Westinghouse/ABB electromechanical relays.
- Experienced with commissioning SEL microprocessor relays such as 311C, 311L, 387, 411L, 421, 487B, 487E, 487V, 587, 587Z, and 787.
- Experienced with commissioning GE microprocessor relays such as C30, D60, F35, L90, T35 and T60.
- Support RTU upgrade projects for various clients.
- Accurately documenting and submitting test reports used for client reporting and regulatory purposes.
- Interpret one line, three line, wiring, and schematic diagrams with ability to recognize and bring attention to discrepancies.
- Accurately completes time and expense reports along with maintaining good condition of assigned company vehicle.
Qualifications
- Willingness to travel overnight (up to 95%).
- Ideal candidate will have 4+ years experience in the electrical testing industry with a focus working with protection and control equipment with HV utility, co-op, power generation, federal, or municipal clients.
- Provide oversight of protection and control technicians and engineers.
- Bachelor of Science in Electrical Engineering or Electrical Engineering Technology.
- Proven experience with transmission and distribution relays to include SEL, GE, ABB, and Westinghouse.
- Familiarity with test equipment to include Doble 6150, Powercomm PCA-4125A, Arbiter 931, Vanguard CT 2000C, Omicron CT analyzer.
- Experienced in using test software such as RTS, ProTest, or Protection Suite.
- Experienced in developing detailed commissioning test plans.
- Experience performing relay end to end testing to verify communication assisted tripping schemes such as differential, DCB, POTT, and transfer trip.
- Strong understanding of safe work practices and human performance improvement applicable to protection and control work in utility high voltage substations.
- Capable of performing in-service load checks for new equipment to validate correctness of operation.
- Familiar with NERC PRC-005-6 requirements related to protection systems, automatic reclosing, and sudden pressure relaying maintenance.
EQUAL OPPORTUNITY EMPLOYER | DRUG-FREE WORKPLACE
Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace.
NO AGENCIES PLEASE
Pay Range
USD $80.00 - USD $85.00 /Hr.
See all 47+ Manufacturing Engineer at Shermco Industries jobs
Sign up for free to unlock all listings, filter by visa type, and get alerts for new Manufacturing Engineer at Shermco Industries roles.
Get Access To All JobsTips for Finding Manufacturing Engineer Jobs at Shermco Industries Jobs
Align your credentials to FDA-regulated manufacturing
Shermco's medical device work falls under FDA quality system regulations. Certifications like ASQ CQE or experience documenting processes to ISO 13485 standards strengthen your profile before you apply and signal readiness for regulated manufacturing environments.
Target roles that match your degree field precisely
Manufacturing Engineer positions at medical device companies require a degree directly tied to the role, such as mechanical, industrial, or biomedical engineering. A mismatch between your field of study and the job title is the most common reason specialty occupation petitions face scrutiny.
Search verified sponsoring employers on Migrate Mate
Filter Manufacturing Engineer openings by visa type on Migrate Mate to confirm Shermco Industries is actively sponsoring for the specific role and work authorization you need before investing time in an application.
Clarify OPT or CPT timing before your first interview
If you're on F-1 status, confirm your OPT start date and STEM extension eligibility before the offer stage. Shermco will need to verify your work authorization through E-Verify, so gaps or timing mismatches can stall the hiring process unexpectedly.
Understand the PERM timeline for EB-2 and EB-3 sponsorship
Employer-sponsored Green Card filings for manufacturing roles start with a DOL PERM labor certification, which can take a year or more before an immigrant petition is filed. Raise this pathway in the offer conversation, not after you've signed.
Prepare a process improvement portfolio before final interviews
Shermco's manufacturing roles emphasize production efficiency and quality control. Documenting specific projects where you reduced defect rates, improved cycle times, or led Lean or Six Sigma initiatives gives interviewers concrete evidence that you can contribute from day one.
Manufacturing Engineer at Shermco Industries jobs are hiring across the US. Find yours.
Find Manufacturing Engineer at Shermco Industries JobsFrequently Asked Questions
Does Shermco Industries sponsor H-1B visas for Manufacturing Engineers?
Shermco Industries sponsors visa types including EB-2 and EB-3 immigrant visas for Manufacturing Engineer roles, but H-1B sponsorship is not among the visa categories they have been documented sponsoring for this function. If H-1B is your primary pathway, confirm directly with the recruiter at the offer stage, since sponsorship decisions can vary by role, location, and hiring need.
How do I apply for Manufacturing Engineer jobs at Shermco Industries?
You can browse and apply for Manufacturing Engineer openings at Shermco Industries through Migrate Mate, which filters roles by visa sponsorship type so you can confirm eligibility before applying. Applications typically go through Shermco's careers portal, where you'll complete an online submission. Tailoring your resume to highlight FDA-regulated manufacturing experience improves your chances of moving to an interview.
Which visa types does Shermco Industries commonly sponsor for Manufacturing Engineers?
Shermco Industries has sponsored Manufacturing Engineer roles under F-1 OPT, F-1 CPT, TN, J-1, and employer-sponsored immigrant visa categories including EB-2 and EB-3. TN visas apply to Canadian and Mexican nationals in qualifying engineering roles. EB-2 and EB-3 sponsorship involves a PERM labor certification filed with the DOL before the immigrant petition, so these pathways require a longer-term commitment from both sides.
What qualifications does Shermco Industries expect for Manufacturing Engineer roles?
Shermco's Manufacturing Engineer positions in medical device operations typically require a bachelor's degree in mechanical, industrial, or biomedical engineering. Hands-on experience with process validation, production documentation, and quality systems is expected. Familiarity with Lean manufacturing or Six Sigma methodologies, and exposure to FDA or ISO 13485 regulated environments, distinguishes competitive candidates from those with general manufacturing backgrounds.
How long does the visa sponsorship process take for a Manufacturing Engineer at Shermco Industries?
Timeline depends heavily on visa type. F-1 OPT authorization can be in place within a few months if your EAD is already approved. TN visas for Canadian citizens can be processed at the border on the day of travel. EB-2 and EB-3 Green Card sponsorship begins with DOL PERM labor certification, which alone can take 12 to 18 months, followed by additional USCIS petition and visa processing steps.
See which Manufacturing Engineer at Shermco Industries employers are hiring and sponsoring visas right now.
Search Manufacturing Engineer at Shermco Industries Jobs