SMT Process Engineer Jobs
SMT Process Engineer jobs are open across electronics manufacturing, defense, medical devices, and consumer technology, at every level from entry-level process technician to senior and principal engineer, with specializations in solder paste inspection, reflow profile optimization, and defect reduction. Scan the live roles below and apply to whichever ones fit.
Find SMT Process Engineer JobsOverview
Showing 5 of 24+ SMT Process Engineer jobs
Process Engineer - Surface Mount Technology (SMT)
As a Process Engineer - Surface Mount Technology (SMT), you will own the performance and continuous improvement of our Surface Mount Device (SMD) production line. Your goal is to maximize safety, quality, output, efficiency, and cost performance while building robust manufacturing processes capable of supporting our continued growth.
You will work directly on the production floor to understand the complete manufacturing value stream, identify bottlenecks, eliminate waste, and implement practical improvements. This is a hands-on role with the freedom and support to challenge existing methods, learn the equipment and processes in depth, and solve problems at their source.
As production expands, you will also help introduce new technology, equipment, and future SMT capacity, from evaluation and setup through qualification and production ramp-up.
Responsibilities:
- Own and continuously improve SMT line performance, cycle time, throughput, yield, efficiency, and cost.
- Analyze production data and processes to identify bottlenecks, losses, and improvement opportunities.
- Drive Lean improvements including 5S, standardized work, line balancing, workflow optimization, changeover reduction, and waste elimination.
- Troubleshoot process and equipment issues, eliminate recurring losses, and implement sustainable root-cause corrective actions.
- Develop the equipment, process, and programming knowledge necessary to independently investigate and implement manufacturing improvements.
- Establish and improve process controls, PFMEAs, Control Plans, work instructions, training, and production standards to ensure safe, capable, and repeatable manufacturing processes.
- Collaborate with production technicians, Work Preparation, and engineering teams to improve process capability and consistency across shifts.
- Support NPI and ensure manufacturing processes are capable, repeatable, and production-ready.
- Support the evaluation, selection, installation, commissioning, qualification, and ramp-up of new technologies, equipment, and future SMT production lines.
Required Qualifications:
- Bachelor's degree in Manufacturing, Mechanical, Electrical, or Industrial Engineering, or a related engineering discipline.
- Hands-on technical experience in a manufacturing, production, automation, or similar technical environment.
- Understanding of structured problem solving, root-cause analysis, and data-driven process improvement.
- Ability to work hands-on in a fast-paced production environment.
Preferred Skills:
- Experience with SMT, SMD, PCBA, electronics manufacturing, or automated production equipment.
- Knowledge of Lean manufacturing, 5S, standard work, line balancing, and continuous improvement.
- Experience analyzing production data, cycle times, yield, or equipment performance.
- Familiarity with SMT equipment, programming, process controls, or manufacturing automation.
- Knowledge of SPC, OEE, PFMEA, DOE, or other manufacturing engineering methods.
- Familiarity with IPC standards, ISO 9001 quality systems, and electronics manufacturing requirements.
Employee Profile:
- Passionate about technology and creating meaningful technologies that make the world work.
- Takes ownership, builds trust, and follows through on commitments.
- Values collaboration and works effectively across production and engineering teams.
- Pursues excellence in quality, efficiency, and results.
- Ambitious, curious, and eager to learn beyond traditional role boundaries.
- Detail-oriented, analytical, and results-driven.
- Annual Salary Range: $65,000 - $85,000
Why Prodrive Technologies?
At Prodrive Technologies, we believe in creating an environment where our employees can thrive both professionally and personally. Here’s what you can expect when you join our team:
Work Environment – Climate controlled, clean, and collaborative facility
Career Growth – Opportunities to advance in leadership or technical tracks within a growing organization
Health & Wellness – Comprehensive medical, dental, and vision coverage, along with group short- and long-term disability, life insurance, and AD&D.
Retirement Planning – 401(k) + a yearly bonus intended for retirement purposes
Paid Time Off – Generous PTO/Holiday package (6.25 weeks) and sick leave (2 weeks) to recharge and spend time with loved ones.
Employee Recognition & Engagement – A collaborative culture supported by regular team events and initiatives that recognize individual and team contributions.
On-site Free Lunch – Complimentary, nutritious lunch options provided daily for employees working on-site.
Fitness Support – Access to subsidized gym memberships ranging from basic to premium tiers through Wellhub.
Parental Leave – Paid leave to support new parents during this important life transition.
When you join Prodrive Technologies, you’re not just accepting a job, you’re becoming part of a forward-thinking, supportive team that values your well-being, personal development, and the unique contributions you bring.
Job Type:
- Full-time
Benefits:
- 401(k)
- Dental insurance
- Health insurance
- Vision insurance
- Health savings account
- Life insurance
- On-the-job training
- Parental leave
- Referral program
Ability to Commute:
- Canton, MA 02021 (Required)
Work Location:
In person
Applicable job positions:
Process Engineer | SMT Process Engineer | SMD Process Engineer | SMT Engineer | Surface Mount Technology Engineer | Surface Mount Engineer | Manufacturing Engineer | SMT Manufacturing Engineer | PCBA Process Engineer | PCBA Manufacturing Engineer | Electronics Manufacturing Engineer | Electronics Process Engineer | Production Engineer | Industrial Engineer | Manufacturing Process Engineer | Continuous Improvement Engineer | Lean Manufacturing Engineer | Manufacturing Equipment Engineer | Automation Engineer | NPI Engineer | New Product Introduction Engineer
Pay: $65,000.00 - $85,000.00 per year
Benefits:
- 401(k)
- Dental insurance
- Flexible schedule
- Flexible spending account
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Parental leave
- Professional development assistance
- Referral program
- Retirement plan
- Vision insurance
Work Location: In person
Process Engineer - Surface Mount Technology (SMT)
As a Process Engineer - Surface Mount Technology (SMT), you will own the performance and continuous improvement of our Surface Mount Device (SMD) production line. Your goal is to maximize safety, quality, output, efficiency, and cost performance while building robust manufacturing processes capable of supporting our continued growth.
You will work directly on the production floor to understand the complete manufacturing value stream, identify bottlenecks, eliminate waste, and implement practical improvements. This is a hands-on role with the freedom and support to challenge existing methods, learn the equipment and processes in depth, and solve problems at their source.
As production expands, you will also help introduce new technology, equipment, and future SMT capacity, from evaluation and setup through qualification and production ramp-up.
Responsibilities:
- Own and continuously improve SMT line performance, cycle time, throughput, yield, efficiency, and cost.
- Analyze production data and processes to identify bottlenecks, losses, and improvement opportunities.
- Drive Lean improvements including 5S, standardized work, line balancing, workflow optimization, changeover reduction, and waste elimination.
- Troubleshoot process and equipment issues, eliminate recurring losses, and implement sustainable root-cause corrective actions.
- Develop the equipment, process, and programming knowledge necessary to independently investigate and implement manufacturing improvements.
- Establish and improve process controls, PFMEAs, Control Plans, work instructions, training, and production standards to ensure safe, capable, and repeatable manufacturing processes.
- Collaborate with production technicians, Work Preparation, and engineering teams to improve process capability and consistency across shifts.
- Support NPI and ensure manufacturing processes are capable, repeatable, and production-ready.
- Support the evaluation, selection, installation, commissioning, qualification, and ramp-up of new technologies, equipment, and future SMT production lines.
Required Qualifications:
- Bachelor's degree in Manufacturing, Mechanical, Electrical, or Industrial Engineering, or a related engineering discipline.
- Hands-on technical experience in a manufacturing, production, automation, or similar technical environment.
- Understanding of structured problem solving, root-cause analysis, and data-driven process improvement.
- Ability to work hands-on in a fast-paced production environment.
Preferred Skills:
- Experience with SMT, SMD, PCBA, electronics manufacturing, or automated production equipment.
- Knowledge of Lean manufacturing, 5S, standard work, line balancing, and continuous improvement.
- Experience analyzing production data, cycle times, yield, or equipment performance.
- Familiarity with SMT equipment, programming, process controls, or manufacturing automation.
- Knowledge of SPC, OEE, PFMEA, DOE, or other manufacturing engineering methods.
- Familiarity with IPC standards, ISO 9001 quality systems, and electronics manufacturing requirements.
Employee Profile:
- Passionate about technology and creating meaningful technologies that make the world work.
- Takes ownership, builds trust, and follows through on commitments.
- Values collaboration and works effectively across production and engineering teams.
- Pursues excellence in quality, efficiency, and results.
- Ambitious, curious, and eager to learn beyond traditional role boundaries.
- Detail-oriented, analytical, and results-driven.
- Annual Salary Range: $65,000 - $85,000
Why Prodrive Technologies?
At Prodrive Technologies, we believe in creating an environment where our employees can thrive both professionally and personally. Here’s what you can expect when you join our team:
Work Environment – Climate controlled, clean, and collaborative facility
Career Growth – Opportunities to advance in leadership or technical tracks within a growing organization
Health & Wellness – Comprehensive medical, dental, and vision coverage, along with group short- and long-term disability, life insurance, and AD&D.
Retirement Planning – 401(k) + a yearly bonus intended for retirement purposes
Paid Time Off – Generous PTO/Holiday package (6.25 weeks) and sick leave (2 weeks) to recharge and spend time with loved ones.
Employee Recognition & Engagement – A collaborative culture supported by regular team events and initiatives that recognize individual and team contributions.
On-site Free Lunch – Complimentary, nutritious lunch options provided daily for employees working on-site.
Fitness Support – Access to subsidized gym memberships ranging from basic to premium tiers through Wellhub.
Parental Leave – Paid leave to support new parents during this important life transition.
When you join Prodrive Technologies, you’re not just accepting a job, you’re becoming part of a forward-thinking, supportive team that values your well-being, personal development, and the unique contributions you bring.
Job Type:
- Full-time
Benefits:
- 401(k)
- Dental insurance
- Health insurance
- Vision insurance
- Health savings account
- Life insurance
- On-the-job training
- Parental leave
- Referral program
Ability to Commute:
- Canton, MA 02021 (Required)
Work Location:
In person
Applicable job positions:
Process Engineer | SMT Process Engineer | SMD Process Engineer | SMT Engineer | Surface Mount Technology Engineer | Surface Mount Engineer | Manufacturing Engineer | SMT Manufacturing Engineer | PCBA Process Engineer | PCBA Manufacturing Engineer | Electronics Manufacturing Engineer | Electronics Process Engineer | Production Engineer | Industrial Engineer | Manufacturing Process Engineer | Continuous Improvement Engineer | Lean Manufacturing Engineer | Manufacturing Equipment Engineer | Automation Engineer | NPI Engineer | New Product Introduction Engineer
Pay: $65,000.00 - $85,000.00 per year
Benefits:
- 401(k)
- Dental insurance
- Flexible schedule
- Flexible spending account
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Parental leave
- Professional development assistance
- Referral program
- Retirement plan
- Vision insurance
Work Location: In person
See All 24 SMT Process Engineer Jobs
Find roles that match your experience and apply in just a few clicks.
Find SMT Process Engineer JobsSMT Process Engineer Job Market
Who's Hiring
Top Industries Hiring
- Staffing & Recruiting
What Employers Look For
The qualifications that appear most often in SMT process engineer jobs.
- Bachelor's degree in electrical engineering, manufacturing engineering, or a related field
- Hands-on experience with SMT equipment including pick-and-place machines, reflow ovens, and wave solder systems
- Proficiency in IPC standards such as IPC-A-610 and IPC-7711/7721
- Experience with statistical process control, DOE, and root cause analysis methodologies
- Familiarity with solder paste inspection systems, AOI, and X-ray inspection equipment
- Knowledge of Gerber files, BOM review, and DFM principles for PCB assembly
Tips for Your SMT Process Engineer Job Search
Tailor your resume to equipment
List every SMT platform you've operated by name, including pick-and-place machines, reflow ovens, and AOI systems. Hiring managers scan for specific equipment familiarity, and a generic 'SMT experience' line won't pass the first screen.
Quantify your defect reduction results
Employers want numbers, not narratives. Replace phrases like 'improved yield' with specific output metrics tied to your process changes, such as DPMO reductions or first-pass yield gains achieved under your direct ownership.
Apply early to roles that fit
Migrate Mate lists smt process engineer openings from across the United States in one place, so you can find roles that match and apply directly to each listing.
Filter for IPC certification requirements
Many postings require IPC-7711/7721 or IPC-A-610 certification. Search for roles that match your current cert level, then identify gaps to close before targeting postings where those credentials are listed as required rather than preferred.
Prepare a process improvement case study
Interviewers for smt process engineer roles frequently ask you to walk through a problem you diagnosed and fixed on the line. Have one ready that covers your data collection method, root cause analysis tool used, and the measurable outcome.
Negotiate relocation for high-volume sites
Contract manufacturers and ODMs often operate large SMT lines in regions where local talent pools are shallow. If you're open to relocating, say so explicitly in your application and use it as a negotiating point for relocation packages during the offer stage.
SMT Process Engineer Jobs: Frequently Asked Questions
Which companies are hiring the most smt process engineers?
The companies hiring the most smt process engineers right now include Sanmina, Flex, and Flextron Circuit Assembly, with the largest share of openings in Texas, Connecticut, and California, based on current listings on Migrate Mate as of November 2026. Demand is strongest at contract manufacturers, defense electronics firms, and medical device companies with active production lines.
How many smt process engineer jobs are remote?
About 0% of smt process engineer openings are fully remote or hybrid as of November 2026, reflecting the hands-on nature of most SMT roles. Process development, DFM review, and documentation-heavy positions are the sub-specializations most likely to include remote or hybrid flexibility, while line support and equipment-focused roles remain predominantly on-site.
How do you become a smt process engineer?
Start with a degree in electrical, manufacturing, or industrial engineering, then gain hands-on exposure to PCB assembly lines through internships or technician roles. Build proficiency with common SMT platforms and earn IPC certifications like IPC-A-610. From there, move into a junior process or manufacturing engineer role where you own specific line segments and document process improvements formally.
Can you get an smt process engineer job with little experience?
Yes, entry-level smt process engineer roles do exist, particularly at contract manufacturers who hire associates to support senior engineers on the line. Employers value hands-on exposure from internships, co-ops, or technician work over academic credentials alone. Demonstrating familiarity with IPC standards, basic SPC concepts, and at least one SMT platform significantly strengthens an entry-level application.
What does the smt process engineer interview process look like?
Most smt process engineer interviews include an initial recruiter screen, a technical phone interview covering process knowledge and equipment familiarity, and an on-site or video panel with engineering and manufacturing leads. Expect questions on defect root cause analysis, yield improvement projects you've owned, and your experience with specific SMT platforms. Some employers include a practical exercise or facility tour.
Where can I find and apply to smt process engineer jobs?
You can find and apply to smt process engineer jobs on Migrate Mate, which lists current openings from across the United States. Search the available roles to find positions that match your equipment experience, certification level, and preferred location, then apply directly to each listing that fits your background.
See All 24 SMT Process Engineer Jobs
Find roles that match your experience and apply in just a few clicks.
Find SMT Process Engineer Jobs