Welding Technician Jobs
Welding Technician jobs are open across manufacturing, construction, aerospace, and oil and gas, at every level from entry-level to senior and lead, with specializations in MIG, TIG, and structural welding. Scan the live roles below and apply to whichever ones fit.
Find Welding Technician JobsOverview
Showing 5 of 89+ Welding Technician jobs
INTRODUCTION
Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is your trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 575 team members across the Southern United States, TTL provides a wide range of services, including civil engineering; transportation design and CEI; geotechnical engineering; environmental consulting; construction materials engineering and testing; and surveying, GIS, and mapping.
At TTL, we are driven to serve our clients, driven to serve our communities, and driven to serve our people. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual.
ROLE AND RESPONSIBILITIES
Entry-Level Welding Inspector / NDT Technician — Birmingham, AL and Tuscaloosa, AL
Starting pay $18.00 - $24.00/hour depending on experience
TTL is looking for entry-level welding inspectors and non-destructive testing technicians in Birmingham and Tuscaloosa, Alabama. This role supports projects throughout Alabama, performing construction inspections that include evaluating, monitoring and testing to deliver accurate data and high-quality service to our clients. In this position, you will play a key role in nondestructive testing and special inspections, helping ensure compliance with applicable codes, standards and project specifications.
Welding experience or welding school would be a plus but not a required. Even if you don’t have experience or certifications, TTL will train you and pay for your training and certification courses. This is an opportunity to break into a great career and progress in one company in compensation, skills, and responsibility. Come start a career with us and we’ll help you advance!
Build your Foundation. Build your Future. Build your Legacy.
Come to TTL.
- Performs visual testing (VT) of structural welds to verify compliance with applicable codes, standards, and project specifications
- Conducts nondestructive testing (NDT), including Ultrasonic Testing (UT), Magnetic Particle Testing (MT), and Liquid Penetrant Testing (PT)
- Performs coating inspections and testing to ensure adherence to applicable industry standards and specifications
- Inspects structural steel and bolted connections for compliance with relevant codes and project requirements
- Follows established procedures, performs accurate calculations and documentation, and maintains effective working relationships with coworkers, clients, and contractors
- Prepares detailed daily inspection reports and client documentation; operates with moderate supervision
BASIC QUALIFICATIONS
- Minimum of a high school diploma or equivalent; college coursework or degree preferred with emphasis in welding, construction, physical sciences or math
- Strong written and verbal communication skills with the ability to interact professionally with clients and team members
- Must possess a valid driver’s license and have a clean driving record
- Ability to perform heavy lifting up to 50+ lbs
- Must be able to work in outdoor environments in varying weather conditions, including heat and cold
- Basic computer skills and ability to use related technology and software
- Ability to safely operate aerial lifts and work at heights as required
Job Type: Full-time
This position is subject to a pre-employment drug and motor vehicle record check
TTL is an EEO/AAP employer
INTRODUCTION
Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is your trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 575 team members across the Southern United States, TTL provides a wide range of services, including civil engineering; transportation design and CEI; geotechnical engineering; environmental consulting; construction materials engineering and testing; and surveying, GIS, and mapping.
At TTL, we are driven to serve our clients, driven to serve our communities, and driven to serve our people. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual.
ROLE AND RESPONSIBILITIES
Entry-Level Welding Inspector / NDT Technician — Birmingham, AL and Tuscaloosa, AL
Starting pay $18.00 - $24.00/hour depending on experience
TTL is looking for entry-level welding inspectors and non-destructive testing technicians in Birmingham and Tuscaloosa, Alabama. This role supports projects throughout Alabama, performing construction inspections that include evaluating, monitoring and testing to deliver accurate data and high-quality service to our clients. In this position, you will play a key role in nondestructive testing and special inspections, helping ensure compliance with applicable codes, standards and project specifications.
Welding experience or welding school would be a plus but not a required. Even if you don’t have experience or certifications, TTL will train you and pay for your training and certification courses. This is an opportunity to break into a great career and progress in one company in compensation, skills, and responsibility. Come start a career with us and we’ll help you advance!
Build your Foundation. Build your Future. Build your Legacy.
Come to TTL.
- Performs visual testing (VT) of structural welds to verify compliance with applicable codes, standards, and project specifications
- Conducts nondestructive testing (NDT), including Ultrasonic Testing (UT), Magnetic Particle Testing (MT), and Liquid Penetrant Testing (PT)
- Performs coating inspections and testing to ensure adherence to applicable industry standards and specifications
- Inspects structural steel and bolted connections for compliance with relevant codes and project requirements
- Follows established procedures, performs accurate calculations and documentation, and maintains effective working relationships with coworkers, clients, and contractors
- Prepares detailed daily inspection reports and client documentation; operates with moderate supervision
BASIC QUALIFICATIONS
- Minimum of a high school diploma or equivalent; college coursework or degree preferred with emphasis in welding, construction, physical sciences or math
- Strong written and verbal communication skills with the ability to interact professionally with clients and team members
- Must possess a valid driver’s license and have a clean driving record
- Ability to perform heavy lifting up to 50+ lbs
- Must be able to work in outdoor environments in varying weather conditions, including heat and cold
- Basic computer skills and ability to use related technology and software
- Ability to safely operate aerial lifts and work at heights as required
Job Type: Full-time
This position is subject to a pre-employment drug and motor vehicle record check
TTL is an EEO/AAP employer
See All 89 Welding Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Welding Technician JobsWelding Technician Job Market
Who's Hiring
Top Industries Hiring
- Mining & Natural Resources
- Technology & Software
- Consulting & Professional Services
What Employers Look For
The qualifications that appear most often in welding technician jobs.
- Proficiency in MIG and TIG welding processes on carbon steel and stainless
- AWS Certified Welder (CW) or equivalent procedure qualification documentation
- Ability to read and interpret blueprints, weld symbols, and engineering drawings
- 1-3 years of hands-on welding experience in a manufacturing or industrial setting
- Knowledge of weld inspection methods including visual inspection and basic NDT
- High school diploma or GED, with vocational or technical school training preferred
Tips for Your Welding Technician Job Search
List your certifications by process type
Hiring managers scan for specific processes first. List your AWS certifications, ASME qualifications, and procedure qualifications by process, TIG, MIG, stick, flux-core, so the right credentials jump out before they read your work history.
Show material experience alongside process skills
Many postings specify carbon steel, stainless, aluminum, or exotic alloys like Inconel. If you've welded multiple base materials, call each one out explicitly in your resume. Leaving it implied is the most common reason qualified candidates get filtered out.
Apply early to roles that fit
Migrate Mate lists welding technician openings from across the United States in one place, so you can find roles that match and apply directly to each listing.
Target postings that match your position qualification
Welding procedure specifications and position qualifications, 1G, 2G, 6G, matter to employers in pipe, pressure vessel, and structural work. When a posting lists required positions, only apply if your current qualifications cover them or you can test before your start date.
Prepare a weld test strategy before the interview
Most shops require a hands-on weld test, sometimes the same day as your interview. Ask in advance what process and position they'll test, and practice on the same material type. Arriving without that prep is the fastest way to lose an otherwise strong offer.
Negotiate total compensation, not just hourly rate
Overtime structure, shift differentials, tool allowances, and per diem on travel assignments can add up significantly. Ask about each one separately before accepting any offer so you're comparing the full picture across competing roles.
Welding Technician Jobs: Frequently Asked Questions
Which companies are hiring the most welding technicians?
SME, C&W Services, and SMF are hiring the most welding technicians right now, with openings concentrated in Iowa, Wisconsin, and Alabama, based on current listings on Migrate Mate as of November 2026. Demand is especially strong in aerospace fabrication, heavy equipment manufacturing, and energy sector maintenance.
How many welding technician jobs are remote?
About 6% of welding technician openings are fully remote or hybrid as of November 2026, reflecting the hands-on nature of most roles. The sub-areas most likely to offer remote or hybrid arrangements are welding inspection, quality documentation review, and weld engineering support positions that don't require daily shop floor presence.
How do you become a welding technician?
Most welding technicians complete a vocational or community college welding program, then gain entry-level shop experience where they build process and material qualifications. Earning an AWS Certified Welder credential strengthens your profile early. From there, hands-on time across multiple processes, MIG, TIG, stick, and flux-core, combined with blueprint reading skills, opens doors to more advanced and specialized roles.
Can you get hired as a welding technician with little experience?
Yes, entry-level welding technician roles exist specifically for candidates coming out of vocational programs or with limited shop time. Employers in high-volume production environments often hire and train new welders on a single process. Passing a basic weld test on the shop's primary material is usually more important than years on the resume at the entry level.
What does the welding technician interview process look like?
Most welding technician interviews involve a brief phone or in-person conversation covering your process experience and certifications, followed by a practical weld test on the shop floor. The test typically evaluates joint fit-up, travel speed, and bead consistency on the material the company works with most. Some employers also ask you to interpret a weld symbol drawing before or after the hands-on portion.
Where can I find and apply to welding technician jobs?
You can find and apply to welding technician jobs on Migrate Mate, which lists current openings from employers across the United States. Search for roles that match your process qualifications and location, then apply directly to each listing that fits your background and targets.
See All 89 Welding Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Welding Technician Jobs