Composite Technician Jobs
Composite Technician jobs are open across aerospace, defense, marine, and automotive manufacturing, at every level from entry-level layup technician to senior composite structures specialist, with specializations in hand layup, autoclave processing, and repair operations. Find a role that fits below and apply directly.
Find Composite Technician JobsOverview
Showing 5 of 99+ Composite Technician jobs
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.
Under close supervision, with detailed instruction and intermittent review, and working in a loud manufacturing environment with a variety of epoxy agents, this position performs elementary and routine tasks in preparation for and assists in the fabrication, curing, build-up and assembly of various types of composite materials where required information is readily available, methods and sequences have been pre-determined and tooling is provided. Works to blueprints, templates, sample parts, process sheets and other authorized information.
DUTIES & RESPONSIBILITIES:
- Assist in the preparation of molds and forms.
- Mark and cut tape, woven material, honeycomb, adhesive and similar materials following templates, guides or specific dimensions and sequences following specific instruction.
- Route, drill, trim and sand to blueprint dimensions and tolerances.
- Vacuum bag parts for room temperature cure.
- Assist in the lay-up of composite materials to molds.
- With assistance, fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets and voids following directions and instructions.
- Assemble Aircraft components using structural adhesives, rivets and threaded fasteners.
- Prepare surface and paint composite and metal components including bodywork, contour shaping and sanding.
- Apply spray application of epoxy paints, urethane and water based epoxy coatings, using a high volume low-pressure spray gun.
- Assist in the development of shop aids to facilitate fabrication, trimming and assembly as required.
- Check expiration dates of materials prior to use, prepare proper mixes of resins and catalysts.
- Maintain records as required.
- Support quality process by maintaining work area in an orderly condition by returning tools, equipment and material to storage areas.
- Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
- Expected to work in a safe manner in accordance with established operating procedures and practices.
- Additional Functions: Other duties as assigned or required.
Job Qualifications
- Typically requires High School diploma or equivalent.
- Must be able to verbally communicate, read and comprehend written and verbal instructions.
- Must be familiar with blueprints and other similar drawings and documents; capable of doing simple mathematical calculations; and familiar with a variety of machinist hand tools and measuring instruments. May require respirator certification.
- Must be able to work in a loud environment; work extended hours as required; and be able to lift assemblies weighing up to 50 lbs.
Job Category
Manufacturing
Experience Level
Entry-Level (0-2 years)
Workstyle
Onsite
Full-Time/Part-Time
Full-Time Hourly
Pay Range Low
39,000
Pay Range High
58,125
Travel Percentage Required
0% - 25%
Relocation Assistance Provided?
No
US Citizenship Required?
Yes
Clearance Required?
No
Search Jobs at | General Atomics and Affiliated Companies
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.
Under close supervision, with detailed instruction and intermittent review, and working in a loud manufacturing environment with a variety of epoxy agents, this position performs elementary and routine tasks in preparation for and assists in the fabrication, curing, build-up and assembly of various types of composite materials where required information is readily available, methods and sequences have been pre-determined and tooling is provided. Works to blueprints, templates, sample parts, process sheets and other authorized information.
DUTIES & RESPONSIBILITIES:
- Assist in the preparation of molds and forms.
- Mark and cut tape, woven material, honeycomb, adhesive and similar materials following templates, guides or specific dimensions and sequences following specific instruction.
- Route, drill, trim and sand to blueprint dimensions and tolerances.
- Vacuum bag parts for room temperature cure.
- Assist in the lay-up of composite materials to molds.
- With assistance, fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets and voids following directions and instructions.
- Assemble Aircraft components using structural adhesives, rivets and threaded fasteners.
- Prepare surface and paint composite and metal components including bodywork, contour shaping and sanding.
- Apply spray application of epoxy paints, urethane and water based epoxy coatings, using a high volume low-pressure spray gun.
- Assist in the development of shop aids to facilitate fabrication, trimming and assembly as required.
- Check expiration dates of materials prior to use, prepare proper mixes of resins and catalysts.
- Maintain records as required.
- Support quality process by maintaining work area in an orderly condition by returning tools, equipment and material to storage areas.
- Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
- Expected to work in a safe manner in accordance with established operating procedures and practices.
- Additional Functions: Other duties as assigned or required.
Job Qualifications
- Typically requires High School diploma or equivalent.
- Must be able to verbally communicate, read and comprehend written and verbal instructions.
- Must be familiar with blueprints and other similar drawings and documents; capable of doing simple mathematical calculations; and familiar with a variety of machinist hand tools and measuring instruments. May require respirator certification.
- Must be able to work in a loud environment; work extended hours as required; and be able to lift assemblies weighing up to 50 lbs.
Job Category
Manufacturing
Experience Level
Entry-Level (0-2 years)
Workstyle
Onsite
Full-Time/Part-Time
Full-Time Hourly
Pay Range Low
39,000
Pay Range High
58,125
Travel Percentage Required
0% - 25%
Relocation Assistance Provided?
No
US Citizenship Required?
Yes
Clearance Required?
No
Search Jobs at | General Atomics and Affiliated Companies
See All 99 Composite Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Composite Technician JobsComposite Technician Job Market
Who's Hiring
Top Industries Hiring
- Telecommunications
What Employers Look For
The qualifications that appear most often in composite technician jobs.
- Experience with hand layup, prepreg, or wet layup composite fabrication processes
- Ability to read and interpret engineering drawings, blueprints, and work orders
- Familiarity with autoclave or oven cure cycle setup and monitoring
- Knowledge of non-destructive testing methods such as ultrasonic or tap testing
- Experience with surface preparation, bonding, and composite repair procedures
- High school diploma or GED with one or more years of composite fabrication experience
Tips for Your Composite Technician Job Search
Tailor your resume to material systems
List the specific resin systems, fiber types, and cure methods you have worked with, such as prepreg carbon fiber, wet layup fiberglass, or out-of-autoclave processes. Hiring managers scan for these details before they read anything else on your resume.
Get your ACMT certification before applying
The Society of Plastics Engineers Composites Manufacturing certification and the American Composites Manufacturers Association technician credential appear in aerospace and defense job postings far more than a degree requirement does. Earning either one before you apply gives your application a concrete edge.
Apply early to roles that fit
Migrate Mate lists composite technician openings from across the United States in one place, so you can find roles that match your material and process background and apply directly to each listing without sorting through unrelated results.
Highlight NDT exposure on your application
Non-destructive testing methods, including ultrasonic inspection, visual inspection, and tap testing, come up constantly in composite technician postings. Even limited hands-on exposure is worth calling out, since many shops train NDT in-house and want candidates who already understand why it matters.
Prepare a process-specific answer for every interview stage
Interviewers for composite roles almost always ask you to walk through a layup or repair procedure step by step. Practice narrating your process out loud, including how you handle fiber orientation, vacuum bagging, and cure cycle monitoring, so your answers are concrete rather than general.
Negotiate shift differentials and tool allowances separately
Many composite fabrication shops run second and third shifts and offer differential pay that is not listed in the base offer. Ask about shift premiums, PPE reimbursements, and tool allowances during the offer stage, since these are negotiable and rarely surface unless you bring them up.
Composite Technician Jobs: Frequently Asked Questions
Which companies are hiring the most composite technicians?
The most active employers for composite technicians right now are Northrop Grumman, L3Harris, and General Atomics, and the most openings are in California, Utah, and Texas, based on current listings on Migrate Mate as of November 2026. Aerospace and defense contractors consistently account for the largest share of open positions.
How many composite technician jobs are remote?
About 0% of composite technician openings are fully remote or hybrid as of November 2026, reflecting that most fabrication and repair work requires hands-on access to materials and equipment. Quality inspection roles and technical documentation positions account for the majority of the remote-eligible share.
How do you become a composite technician?
Start by completing a vocational or community college program in composites manufacturing, materials technology, or a related trade, or pursue an apprenticeship with an aerospace or marine fabrication shop. Build hands-on experience with layup, vacuum bagging, and cure processes, then pursue an industry certification such as the ACMT credential to validate your skills to employers.
Can you get hired as a composite technician with little experience?
Yes, many shops hire candidates with no direct composite experience if you have a background in a related hands-on trade such as fiberglass, woodworking, or automotive body work. Focus your application on transferable skills like precision measurement, surface preparation, and reading technical drawings, and be specific about any exposure to epoxy, resin, or laminating work.
What does the composite technician interview process look like?
Most composite technician interviews begin with a phone or video screen focused on your fabrication background and familiarity with specific material systems. An in-person or facility visit typically follows, where you may be asked to walk through a layup or repair procedure verbally or demonstrate a hands-on task. Some employers include a brief written assessment on cure cycles or inspection methods.
Where can I find and apply to composite technician jobs?
You can find and apply to composite technician jobs on Migrate Mate, which lists current openings from across the United States in one place. Search for roles that match your material systems experience and process background, then apply directly to each listing from the page.
See All 99 Composite Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Composite Technician Jobs