Entry Level O&M Engineer Jobs
New grad o&m engineer jobs welcome recent graduates and entry level candidates with zero to two years of experience, where strong internship work or hands-on project experience can matter more than a long resume. Most openings are on-site roles across Energy, Science & Research, and Technology & Software, with employers like NAES Corporation, Predicate Logic, and ALSTOM hiring at this level now.
Find Entry Level O&M Engineer JobsOverview
Showing 5 of 9+ Entry Level O&M Engineer jobs
Req ID:534132
Purpose of the job
Operate and Maintain APM system and related subsystems at O&M site.
The O&M Technician at Entry level to perform preventive maintenance and corrective action repairs to the AGTS wayside System, subsystems, components and APM vehicles. With appropriate training and acquired experience, O&M technician will be required APM trains recovery of stalled trains. This position is also required to learn and operate the AGTS System from Central Control.
Key responsibilities and challenges
- Operate, troubleshoot and repair Central Control computer console, Wayside systems, vehicles and components as assigned.
- Inspect vehicles and related equipment to detect failed or improperly operating equipment.
- Operate trains, doors, guideway switches, and power distribution systems in a manual mode.
- Perform electrical, mechanical, hydraulic, and pneumatic systems inspection following established procedures or other written or verbal instructions.
- Repair or replace defective parts or equipment utilizing manuals, drawings, specs, and other written or verbal instructions.
- Support recovery of malfunctioning vehicles from system as needed.
- Respond to system failures to recover vehicles and restore system operation.
- Respond to customer requests in a timely fashion. Assist passengers during emergency operations.
- Conduct thorough and complete preventive maintenance checks on vehicles, systems, and subsystems as assigned.
Background / Experience
- 2 years of experience in maintenance, operations, manufacturing, transportation, industrial equipment, facilities, or a related technical environment.
- Internship, apprenticeship, vocational placement, or military technical training may be accepted in place of direct rail experience.
- Exposure to mechanical, electrical, electromechanical, hydraulic, pneumatic, or low-voltage systems preferred.
- Basic understanding of inspection, fault identification, repair, and preventive maintenance activities.
- Experience using hand tools, power tools, measuring devices, and basic diagnostic equipment preferred.
- Ability to read and follow technical procedures, maintenance instructions, checklists, and safety rules.
- Ability to work in depots, workshops, trackside areas, or other active rail environments.
- Strong attention to detail, reliability, and willingness to learn rail systems, operating rules, and maintenance processes.
Education
- Technical diploma, vocational certificate, or associate degree in maintenance, industrial technology, electrical, mechanical, instrumentation, or a related field required.
- Relevant certifications such as OSHA, safety training, electrical/mechanical maintenance, or operator qualifications are a plus.
Key Skills
- Basic computer skills for maintenance logs, CMMS, or reporting.
- Good communication and teamwork skills.
- Ability to follow procedures and work independently after training.
- Physical ability to lift tools/materials, stand for long periods, climb ladders, and work in industrial environments.
Additional Requirements or Conditions of Employment
- Must be able to work a 24/7/365 schedule, including weekends and holidays.
- Must have a valid driver’s license.
- Must be able to pass required background screening and drug testing.
- Must be able to safely work from elevated work areas and use ladders as required.
- Must be able to effectively communicate in written and spoken English for safety and operational purposes.
Compensation
Starting rate $40.89 DOE
You don’t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you’ll be proud. If you’re up for the challenge, we’d love to hear from you!
Important to note
As a global business, we’re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We’re committed to creating an inclusive workplace for everyone.
Nearest Major Market: Denver
Job Segment: Technician, Intern, Entry Level, Technology
Req ID:534132
Purpose of the job
Operate and Maintain APM system and related subsystems at O&M site.
The O&M Technician at Entry level to perform preventive maintenance and corrective action repairs to the AGTS wayside System, subsystems, components and APM vehicles. With appropriate training and acquired experience, O&M technician will be required APM trains recovery of stalled trains. This position is also required to learn and operate the AGTS System from Central Control.
Key responsibilities and challenges
- Operate, troubleshoot and repair Central Control computer console, Wayside systems, vehicles and components as assigned.
- Inspect vehicles and related equipment to detect failed or improperly operating equipment.
- Operate trains, doors, guideway switches, and power distribution systems in a manual mode.
- Perform electrical, mechanical, hydraulic, and pneumatic systems inspection following established procedures or other written or verbal instructions.
- Repair or replace defective parts or equipment utilizing manuals, drawings, specs, and other written or verbal instructions.
- Support recovery of malfunctioning vehicles from system as needed.
- Respond to system failures to recover vehicles and restore system operation.
- Respond to customer requests in a timely fashion. Assist passengers during emergency operations.
- Conduct thorough and complete preventive maintenance checks on vehicles, systems, and subsystems as assigned.
Background / Experience
- 2 years of experience in maintenance, operations, manufacturing, transportation, industrial equipment, facilities, or a related technical environment.
- Internship, apprenticeship, vocational placement, or military technical training may be accepted in place of direct rail experience.
- Exposure to mechanical, electrical, electromechanical, hydraulic, pneumatic, or low-voltage systems preferred.
- Basic understanding of inspection, fault identification, repair, and preventive maintenance activities.
- Experience using hand tools, power tools, measuring devices, and basic diagnostic equipment preferred.
- Ability to read and follow technical procedures, maintenance instructions, checklists, and safety rules.
- Ability to work in depots, workshops, trackside areas, or other active rail environments.
- Strong attention to detail, reliability, and willingness to learn rail systems, operating rules, and maintenance processes.
Education
- Technical diploma, vocational certificate, or associate degree in maintenance, industrial technology, electrical, mechanical, instrumentation, or a related field required.
- Relevant certifications such as OSHA, safety training, electrical/mechanical maintenance, or operator qualifications are a plus.
Key Skills
- Basic computer skills for maintenance logs, CMMS, or reporting.
- Good communication and teamwork skills.
- Ability to follow procedures and work independently after training.
- Physical ability to lift tools/materials, stand for long periods, climb ladders, and work in industrial environments.
Additional Requirements or Conditions of Employment
- Must be able to work a 24/7/365 schedule, including weekends and holidays.
- Must have a valid driver’s license.
- Must be able to pass required background screening and drug testing.
- Must be able to safely work from elevated work areas and use ladders as required.
- Must be able to effectively communicate in written and spoken English for safety and operational purposes.
Compensation
Starting rate $40.89 DOE
You don’t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you’ll be proud. If you’re up for the challenge, we’d love to hear from you!
Important to note
As a global business, we’re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We’re committed to creating an inclusive workplace for everyone.
Nearest Major Market: Denver
Job Segment: Technician, Intern, Entry Level, Technology
See All 9 Entry Level O&M Engineer Jobs
Find roles that match your experience and apply in just a few clicks.
Find Entry Level O&M Engineer JobsEntry Level O&M Engineer Job Market
Who's Hiring
Top Industries Hiring
- Energy
- Science & Research
- Technology & Software
- Electronics & Hardware
- Construction & Real Estate
Entry Level O&M Engineer Jobs: Frequently Asked Questions
How do I get an entry level o&m engineer job?
Entry level o&m engineer roles reward candidates who can demonstrate hands-on familiarity with equipment maintenance, preventive maintenance schedules, and safety protocols, even from internships, co-ops, or vocational training. A degree in mechanical, electrical, or industrial engineering is common, but employers also value relevant certifications and documented project work. Tailoring your resume to highlight any real-world maintenance or operations exposure gives you a clear edge at this stage.
Which companies hire entry level o&m engineers?
Companies hiring entry level o&m engineers right now include NAES Corporation, Predicate Logic, and ALSTOM, based on current listings on Migrate Mate as of November 2026. At this level, hiring tends to come from utilities, energy companies, manufacturing facilities, and infrastructure operators that run ongoing maintenance programs and regularly onboard junior technical staff.
Are there remote entry level o&m engineer jobs?
Yes, though most o&m engineer roles require on-site presence because the work involves physical equipment and facilities. About 0% of entry level o&m engineer openings are remote or hybrid as of November 2026, and those positions typically involve planning, documentation, reporting, or systems monitoring rather than direct hands-on maintenance work.
Are these new grad o&m engineer jobs?
Yes, many of the openings here are new grad and junior roles suited to recent graduates and candidates with little or no professional experience. A new grad-friendly posting typically welcomes zero to two years of experience and treats internships, senior capstone projects, or a strong technical portfolio as qualifying credentials. Look for postings that mention training programs or mentorship, which are reliable signals that the employer supports early-career hires.
Which industries hire the most entry level o&m engineers?
Entry Level o&m engineer roles concentrate in Energy, Science & Research, and Technology & Software, based on current listings on Migrate Mate as of November 2026. These sectors drive consistent entry level hiring because they operate large asset-intensive facilities that require continuous maintenance staffing and regularly backfill junior positions as engineers advance.