Quality Control Technician Jobs in Iowa
Quality Control Technician jobs in Iowa are consistently active, concentrated in food and beverage processing, agricultural equipment manufacturing, and pharmaceutical production, with openings at every level from entry-level inspection roles to senior process quality positions. The heaviest hiring happens in and around Des Moines, Cedar Rapids, and Davenport, where established employers like Tyson Foods, Quaker Oats, and John Deere maintain significant production and quality operations. The most in-demand specialties include food safety compliance, ISO documentation, and statistical process control. Scan the live roles below and apply to whichever ones fit.
Find JobsOverview
Showing 5 of 25+ Quality Control Technician jobs
Carry-On Trailer is NOW HIRING with a NEW STARTING WAGE and $1000 Hiring Bonus!
The Quality Assurance Inspector performs assessment, documentation, and organization tasks to support the efficiency and effectiveness of the production line. Their duties and responsibilities include:
- Inspecting Finished trailers using Carry-on Trailer methods, such as comparing to standards, measuring dimensions, and examining functionality
- Checking that the assembly or production line adheres to standards and procedures and complying with customer requirements
- Reviewing blueprints and specifications to compare to produced goods
- Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database
- Advising the production team on quality control measures to improve product excellence
- Proposing improvements to the production process
- Updating job knowledge by engaging in educational opportunities and regular training
- Keeping measurement equipment operating accurately by verifying all equipment is calibrated correctly, and following calibration requirements and calling for repairs
- Using gauges such as calipers and micrometers to measure products
- Collecting and compiling statistical quality data
- Auditing test methods and inspection plans
- Determining the causes of product defects and reworks.
- MAJOR RESPONSIBILITIES
- Duties include, but not limited to the following, as other duties may be assigned:
- Follow all OSHA and plant safety rules including lock-out tag-out, etc.
- Assist in Quality activities necessary to sustain the highest levels of products possible.
- Able to read and interpret drawings.
- Able to perform basic Math
- Perform visual and dimensional inspections to verify product/component compliance.
- Record inspection results on Inspection Data Sheets.
- Reject defective parts, label and segregate as necessary.
- Perform duties in accordance with applicable OP and WI instructions.
- Able to meet quality and productivity standards as defined by the Carry-on Trailer.
- Work with Engineering other management to resolve problems
- Effectively communicate issues verbally and written documentation to all concerned
- Perform product & process audits
- Help define and sustain proper 5S standards in required areas.
- Teach & Coach operators to proper Quality standards.
- Facilitate the effective hand-off of Quality issues to your incoming shift peer. Ensure effective communication of all issues and corrective actions.
- Inspect products in receiving, welding, paint, and assembly process.
- Assist Quality Management in any other requested activities.
Work conditions:
Performing the duties of this Job, Employee will be required to:
Required to used hands to fingers, handle, or feel Reach with hands and arms Required to stand, walk, stoop, kneel. Occasionally required to sit, climb up and down ladders, and balance.Work Environment
The work environment characteristics could be:
The employee will be standing and walking for most of the day Employee will be spending most of their workday outside in each of the elements; hot, cold, rain, snow, etc. Employee will be exposed to moving parts.- Vision abilities by this job include color vision, ability to adjust focus.
REQUIREMENTS
Education Required:
- Minimum high school diploma is required.
- Formal Training or equivalent experience in GD&T a plus
- Experience working with measuring instruments including micrometers, calipers, Height gauges, CMM, etc.
- Ability to work alone without constant supervision.
- Leadership skills a major plus
- 1~2+ years of Quality experience working with Quality Management System within a repetitive manufacturing environment.
- Experience troubleshooting issues.
- Experience with Root cause analysis and continuous Improvement
- Experience in Leadership
Skills & Knowledge Required:
- Must be able to read and interpret drawings/prints
- Working knowledge of Computer Based Management Systems a plus.
- Ability to Multi-task and perform well under pressure.
- Ability to work as a key member and leader of a team when required.
- High Energy & Dependable
Additional traits and competencies that define the successful candidate are:
- Consistently demonstrates highest level of personal ethical conduct
- Results driven with emphasis on keeping customer and business commitments
Direct questions to Amy Schroeder at (712) 642-4300, X3150 - OR - Amy.Schroeder@carry-ontrailer.com
Carry-On Trailer is NOW HIRING with a NEW STARTING WAGE and $1000 Hiring Bonus!
The Quality Assurance Inspector performs assessment, documentation, and organization tasks to support the efficiency and effectiveness of the production line. Their duties and responsibilities include:
- Inspecting Finished trailers using Carry-on Trailer methods, such as comparing to standards, measuring dimensions, and examining functionality
- Checking that the assembly or production line adheres to standards and procedures and complying with customer requirements
- Reviewing blueprints and specifications to compare to produced goods
- Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database
- Advising the production team on quality control measures to improve product excellence
- Proposing improvements to the production process
- Updating job knowledge by engaging in educational opportunities and regular training
- Keeping measurement equipment operating accurately by verifying all equipment is calibrated correctly, and following calibration requirements and calling for repairs
- Using gauges such as calipers and micrometers to measure products
- Collecting and compiling statistical quality data
- Auditing test methods and inspection plans
- Determining the causes of product defects and reworks.
- MAJOR RESPONSIBILITIES
- Duties include, but not limited to the following, as other duties may be assigned:
- Follow all OSHA and plant safety rules including lock-out tag-out, etc.
- Assist in Quality activities necessary to sustain the highest levels of products possible.
- Able to read and interpret drawings.
- Able to perform basic Math
- Perform visual and dimensional inspections to verify product/component compliance.
- Record inspection results on Inspection Data Sheets.
- Reject defective parts, label and segregate as necessary.
- Perform duties in accordance with applicable OP and WI instructions.
- Able to meet quality and productivity standards as defined by the Carry-on Trailer.
- Work with Engineering other management to resolve problems
- Effectively communicate issues verbally and written documentation to all concerned
- Perform product & process audits
- Help define and sustain proper 5S standards in required areas.
- Teach & Coach operators to proper Quality standards.
- Facilitate the effective hand-off of Quality issues to your incoming shift peer. Ensure effective communication of all issues and corrective actions.
- Inspect products in receiving, welding, paint, and assembly process.
- Assist Quality Management in any other requested activities.
Work conditions:
Performing the duties of this Job, Employee will be required to:
Required to used hands to fingers, handle, or feel Reach with hands and arms Required to stand, walk, stoop, kneel. Occasionally required to sit, climb up and down ladders, and balance.Work Environment
The work environment characteristics could be:
The employee will be standing and walking for most of the day Employee will be spending most of their workday outside in each of the elements; hot, cold, rain, snow, etc. Employee will be exposed to moving parts.- Vision abilities by this job include color vision, ability to adjust focus.
REQUIREMENTS
Education Required:
- Minimum high school diploma is required.
- Formal Training or equivalent experience in GD&T a plus
- Experience working with measuring instruments including micrometers, calipers, Height gauges, CMM, etc.
- Ability to work alone without constant supervision.
- Leadership skills a major plus
- 1~2+ years of Quality experience working with Quality Management System within a repetitive manufacturing environment.
- Experience troubleshooting issues.
- Experience with Root cause analysis and continuous Improvement
- Experience in Leadership
Skills & Knowledge Required:
- Must be able to read and interpret drawings/prints
- Working knowledge of Computer Based Management Systems a plus.
- Ability to Multi-task and perform well under pressure.
- Ability to work as a key member and leader of a team when required.
- High Energy & Dependable
Additional traits and competencies that define the successful candidate are:
- Consistently demonstrates highest level of personal ethical conduct
- Results driven with emphasis on keeping customer and business commitments
Direct questions to Amy Schroeder at (712) 642-4300, X3150 - OR - Amy.Schroeder@carry-ontrailer.com
See All 25 Quality Control Technician Jobs in Iowa
Find roles in Iowa that match your experience and apply in just a few clicks.
Find JobsQuality Control Technician Jobs by City in Iowa
Where Iowa roles are concentrated, by current openings.
Quality Control Technician Job Market in Iowa
A snapshot from current Iowa openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Biotechnology & Pharmaceuticals
What Iowa Employers Look For
The qualifications that appear most often in quality control technician jobs across Iowa.
- High school diploma or GED required, associate degree in quality or manufacturing preferred
- Familiarity with ISO 9001 quality management systems and documentation procedures
- Experience using measuring instruments such as calipers, micrometers, and gauges
- Knowledge of Good Manufacturing Practices relevant to food or pharmaceutical production
- Ability to read and interpret engineering drawings, blueprints, or technical specifications
- Proficiency with statistical process control methods and basic data recording software
Quality Control Technician Jobs in Iowa: Frequently Asked Questions
How do you become a quality control technician in Iowa?
Most Iowa employers hire quality control technicians with a high school diploma or equivalent, though an associate degree in quality technology, manufacturing, or a related field strengthens your candidacy significantly. Iowa does not require a state-issued license specifically for quality control technicians, but certifications from the American Society for Quality, such as the Certified Quality Technician credential, are widely recognized by Iowa manufacturers and can accelerate hiring.
Which companies hire quality control technicians in Iowa?
Employers hiring quality control technicians in Iowa right now include Cambrex, Concrete Strategies, and TelCom Construction, based on current listings on Migrate Mate as of August 2026. Iowa's deep roots in food processing, agricultural equipment, and life sciences mean quality roles turn over regularly at large production facilities across the state.
Which Iowa cities have the most quality control technician jobs?
Des Moines, Cedar Rapids, and Ankeny post the most quality control technician openings in Iowa, driven by the concentration of large food processing plants, pharmaceutical manufacturers, and heavy equipment facilities that anchor those metro economies and run continuous quality operations.
Are there remote quality control technician jobs in Iowa?
Yes, but they're rare. About 50% of quality control technician openings tied to Iowa are remote or hybrid as of August 2026, reflecting how hands-on most of the work is. The portions most likely to allow remote work are documentation review, supplier audits, and quality systems analysis rather than floor inspection or instrument calibration.
How can I get hired as a quality control technician in Iowa with little or no experience?
The most realistic entry path is applying for production associate or line inspection roles at Iowa food processing and manufacturing facilities, where employers like Tyson Foods and Quaker Oats regularly bring on candidates without prior quality titles and train them on internal procedures. Iowa community colleges including Des Moines Area Community College and Kirkwood Community College offer manufacturing technology programs that include quality fundamentals and give new candidates a credential that resonates with local hiring managers. Earning the American Society for Quality's Certified Quality Improvement Associate certification also signals readiness to employers who want demonstrated commitment before experience.
Where can I find and apply to quality control technician jobs in Iowa?
You can find and apply to quality control technician jobs in Iowa on Migrate Mate, which lists current Iowa openings. Search the roles available, find the ones that match your background and location, and apply directly to the ones that fit.
See All 25 Quality Control Technician Jobs in Iowa
Find roles in Iowa that match your experience and apply in just a few clicks.
Find Jobs