Valve Technician Jobs
Valve Technician jobs are open across oil and gas, water utilities, power generation, and chemical processing, from entry-level to senior and lead roles, with specializations in hydraulic systems, pneumatic controls, and actuator maintenance. See the openings below and apply to the ones that match your experience.
Find Valve Technician JobsOverview
Showing 5 of 66+ Valve Technician jobs
The role of Pressure Relief Valve Technician II involves performing advanced tasks related to the assembly, testing, and troubleshooting of pressure relief valves and other equipment. Responsibilities include locating, using, and comprehending manufacturer installation and operation manuals, performing inspections to identify necessary corrective actions, and operating diagnostic equipment. The technician will also support Pressure Relief Valve Technician I employees through mentoring and on-the-job training, and may act in a leadership role for assigned areas.
Responsibilities
- Follow Company Quality Standardization Procedures for all aspects of valve assembly and testing
- Locate, use, and comprehend manufacturer installation and operation manuals
- Perform inspection to identify necessary corrective action as authorized
- Perform PMI
- Assemble, test, and troubleshoot valves and other equipment per applicable codes and standards per manufacturer and/or customer requirements
- Install instrumentation/accessories as necessary
- Operate diagnostic equipment (i.e., EVT, AVK, Hydroset, etc.)
- Perform calibration of measurement equipment in accordance with internal quality procedures
- Measure and record critical dimensions per manufacturer specifications
- Support Pressure Relief Valve Technician I employees through mentoring and/or on-the-job (OJT) training
- May act in a leadership role for assigned area
Education & Experience
- HS Education or GED Equivalent a plus
- 2 - 5 years of industry experience
- Meets all Pressure Relief Valve Technician I qualifications and requirements
- Successful completion of all applicable Quality Standardization Procedures
- Completed Green Tag Certification through Level II
- Completed inspection assessment
- Successful completion of Pressure Relief Valve Level II Written and Performance Tests
- Completed Pilot Valve Training
- Basic OSHA and TWIC card (TWIC, only if required)
- Demonstrate the ability to properly assemble and test valves/equipment of multiple pressure relief valve manufacturers
- Demonstrate proficient use of precision dimensional equipment (i.e., dial caliper, micrometer, etc.)
- Demonstrate ability to bend and fit tubing
- Complete certification training for use of Positive Material Identification (PMI) equipment
- Completion of diagnostic equipment training and/or certification
- Demonstrate proficiency in operating test equipment (steam, air, liquid)
- Demonstrate proficiency in calibration of test gauges and/or transducers
- Complete certification of Certified Individual (CI)
- Effective oral & written communication skills
- Demonstrated “can do” attitude and excellent customer service skills
- Lifting: up to 50 pounds
- Adjusting or moving objects up to 50 pounds in all directions
- Lift and carry: 50 pounds for 100 feet
- Bending, stooping, walking and climbing stairs
- Able to pass periodic medical evaluations and respirator fit tests to ensure continued compliance with OSHA standards.
- Ascending or descending ladders, stairs, scaffolding, ramps
- Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
- Remaining in a stationary position, often standing or sitting for prolonged periods
- Moving about to accomplish tasks or moving from one worksite to another
- Communicating with others to exchange information
- Repeating motions that may include the wrists, hands and/or fingers
- Operating machinery and/or power tools
- Operating motor vehicles or heavy equipment
- Assessing the accuracy, neatness, and thoroughness of the work assigned
- Required physical ability if mandated by customer or regulatory requirements
The role of Pressure Relief Valve Technician II involves performing advanced tasks related to the assembly, testing, and troubleshooting of pressure relief valves and other equipment. Responsibilities include locating, using, and comprehending manufacturer installation and operation manuals, performing inspections to identify necessary corrective actions, and operating diagnostic equipment. The technician will also support Pressure Relief Valve Technician I employees through mentoring and on-the-job training, and may act in a leadership role for assigned areas.
Responsibilities
- Follow Company Quality Standardization Procedures for all aspects of valve assembly and testing
- Locate, use, and comprehend manufacturer installation and operation manuals
- Perform inspection to identify necessary corrective action as authorized
- Perform PMI
- Assemble, test, and troubleshoot valves and other equipment per applicable codes and standards per manufacturer and/or customer requirements
- Install instrumentation/accessories as necessary
- Operate diagnostic equipment (i.e., EVT, AVK, Hydroset, etc.)
- Perform calibration of measurement equipment in accordance with internal quality procedures
- Measure and record critical dimensions per manufacturer specifications
- Support Pressure Relief Valve Technician I employees through mentoring and/or on-the-job (OJT) training
- May act in a leadership role for assigned area
Education & Experience
- HS Education or GED Equivalent a plus
- 2 - 5 years of industry experience
- Meets all Pressure Relief Valve Technician I qualifications and requirements
- Successful completion of all applicable Quality Standardization Procedures
- Completed Green Tag Certification through Level II
- Completed inspection assessment
- Successful completion of Pressure Relief Valve Level II Written and Performance Tests
- Completed Pilot Valve Training
- Basic OSHA and TWIC card (TWIC, only if required)
- Demonstrate the ability to properly assemble and test valves/equipment of multiple pressure relief valve manufacturers
- Demonstrate proficient use of precision dimensional equipment (i.e., dial caliper, micrometer, etc.)
- Demonstrate ability to bend and fit tubing
- Complete certification training for use of Positive Material Identification (PMI) equipment
- Completion of diagnostic equipment training and/or certification
- Demonstrate proficiency in operating test equipment (steam, air, liquid)
- Demonstrate proficiency in calibration of test gauges and/or transducers
- Complete certification of Certified Individual (CI)
- Effective oral & written communication skills
- Demonstrated “can do” attitude and excellent customer service skills
- Lifting: up to 50 pounds
- Adjusting or moving objects up to 50 pounds in all directions
- Lift and carry: 50 pounds for 100 feet
- Bending, stooping, walking and climbing stairs
- Able to pass periodic medical evaluations and respirator fit tests to ensure continued compliance with OSHA standards.
- Ascending or descending ladders, stairs, scaffolding, ramps
- Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
- Remaining in a stationary position, often standing or sitting for prolonged periods
- Moving about to accomplish tasks or moving from one worksite to another
- Communicating with others to exchange information
- Repeating motions that may include the wrists, hands and/or fingers
- Operating machinery and/or power tools
- Operating motor vehicles or heavy equipment
- Assessing the accuracy, neatness, and thoroughness of the work assigned
- Required physical ability if mandated by customer or regulatory requirements
See All 66 Valve Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Valve Technician JobsValve Technician Job Market
Who's Hiring
What Employers Look For
The qualifications that appear most often in valve technician jobs.
- High school diploma or GED with two or more years of valve maintenance experience
- Hands-on experience with gate, ball, butterfly, and control valve repair and testing
- Ability to read and interpret P&IDs, schematics, and technical manuals
- Familiarity with pneumatic and hydraulic actuator troubleshooting and calibration
- Valid driver's license and ability to work in confined spaces or at heights
- ISA CCST certification or NCCER Instrumentation credential preferred
Tips for Your Valve Technician Job Search
Tailor your resume to valve types
Generic maintenance resumes get screened out fast. List the specific valve families you've worked on, such as gate, ball, butterfly, or control valves, and name the industries where you used them. Hiring managers scan for exact equipment matches before they read anything else.
List certifications before job duties
Certifications like ISA CCST, NCCER Instrumentation, or any manufacturer-specific training carry more weight than job titles in this field. Put them in a dedicated section at the top of your resume so reviewers spot them without digging through your work history.
Apply early to roles that fit
Migrate Mate lists valve technician openings from across the United States in one place, so you can find roles that match and apply directly to each listing.
Filter openings by shutdown or turnaround language
Job postings that mention turnarounds, planned outages, or shutdowns signal contract or project-based work with different pay structures and schedules than permanent plant roles. Know which you want before you apply so your availability and expectations are clear from the first conversation.
Prepare a bench test walkthrough for interviews
Many valve technician interviews include a practical component where you describe or demonstrate how you diagnose a failing actuator or calibrate a control valve. Rehearse a clear, step-by-step walkthrough of your process out loud so you can explain it confidently without relying on the physical equipment in front of you.
Negotiate shift differentials, not just base pay
In shift-based plant environments, overnight and weekend differentials can meaningfully change your total compensation. When you reach the offer stage, ask specifically about differential rates and overtime structures rather than focusing only on the base hourly or salary figure.
Valve Technician Jobs: Frequently Asked Questions
Which companies are hiring the most valve technicians?
The companies hiring the most valve technicians right now include Allied Valve, Ferguson, and R.E. MASON, with the largest share of openings in Texas, Louisiana, and Ohio, based on current listings on Migrate Mate as of November 2026. Demand is especially high at refineries, water treatment facilities, and power plants during scheduled turnarounds.
How many valve technician jobs are remote?
About 27% of valve technician openings are fully remote or hybrid as of November 2026, reflecting how hands-on the core work is. The sub-areas most likely to offer remote flexibility are technical support roles, valve specification and procurement positions, and reliability engineering functions that don't require direct plant access.
How do you become a valve technician?
Start with a high school diploma or GED, then gain hands-on experience through an apprenticeship, a pipefitting or instrumentation program at a community college, or an entry-level maintenance role in a plant or utility. Build familiarity with control valves, actuators, and P&IDs, then pursue credentials like ISA CCST or NCCER Instrumentation to move into more specialized positions.
Can you get hired as a valve technician with little experience?
Yes, some employers hire entry-level valve technicians and provide on-the-job training, particularly at water utilities and manufacturing plants that run structured maintenance apprenticeship programs. Your strongest path in with limited experience is to highlight any mechanical, plumbing, or instrumentation background you do have, complete an NCCER core curriculum course, and target postings that explicitly list training as part of the role.
What does the valve technician interview process look like?
Most valve technician interviews include a phone screen covering your equipment background, followed by an in-person or on-site interview where a maintenance supervisor or lead technician asks scenario-based questions about diagnosing failures and performing repairs. Many employers also include a practical skills assessment where you walk through a troubleshooting process, describe calibration steps, or identify valve components from a diagram or physical sample.
Where can I find and apply to valve technician jobs?
You can find and apply to valve technician jobs on Migrate Mate, which lists current openings from employers across the United States. Search for roles that match your equipment background and experience level, then apply directly to each listing that fits.
See All 66 Valve Technician Jobs
Find roles that match your experience and apply in just a few clicks.
Find Valve Technician Jobs