Automation Specialist Jobs in Maryland
Automation Specialist jobs in Maryland are concentrated in the Baltimore metro, the Washington D.C. suburbs including Rockville and Bethesda, and the Annapolis corridor, where defense contractors, federal agencies, and life sciences companies drive steady demand. Employers like Northrop Grumman, Lockheed Martin, and Johns Hopkins Medicine maintain a lasting hiring presence in the state across industrial automation, laboratory automation, and systems integration. Openings range from entry-level controls technicians to senior engineers leading process automation initiatives. See the openings below and apply to the ones that match your experience.
Find Automation Specialist JobsOverview
Showing 5 of 8+ Automation Specialist jobs








Dayton Group Inc. (DGI) has a current need for a full-time Building Automation Systems (BAS) Specialist.
DGI seeks to hire BAS Specialists with work experience and manufacturer training/certifications to troubleshoot, repair/service, maintain and upgrade Building Automation Systems (BAS) at client sites in the United States and overseas per company procedures and contractual requirements. This position will require frequent overseas travel, with trips typically lasting two to four weeks. Due to contract requirements, US citizenship and the ability to obtain and maintain a security clearance is also required. This position is location independent (on-site travel and telework) for the right candidate, however, proximity to a major international airport is required.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Also listed below are the physical demands that must be met by the employee and the work environment that the employee will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Great Pay and Benefits for a BAS Specialist:
- Competitive salary;
- 11 annual paid holidays and minimum 13 days of paid leave;
- Medical, dental, vision, and prescription insurance with 75% of the premiums paid by the company;
- Employer paid short-term and long-term disability, and life insurance.
- 401(k) plan immediately vesting with 4% employer match; and
- Professional development assistance including memberships, professional licenses, and tuition reimbursements.
Duties and Responsibilities
Duties may include, but not be limited to, the following:
- Candidate will be expected to troubleshoot, repair/service, maintain and upgrade Building Automation Systems (BAS) at client sites in the United States and overseas per company procedures and contractual requirements.
- Frequent overseas travel to provide preventive maintenance, system upgrades and troubleshooting of multiple types of building automation systems at client sites.
- Generate reports of findings/work performed, including creating field as-built drawings.
- Take inventory of existing systems and parts, make recommendations for procurement and repairs.
- Must be physically able to climb ladders and stairs and use tools while on a ladder.
- Coordinate/liaise with client and multiple on-site contacts.
Required Qualifications and Experience
- 3+ years of experience with start-up, point to point checkout, maintenance and commissioning of building Direct Digital Control (DDC) Building Automation Systems (BAS) in one or more of the following: Invensys, Tridium Niagara N4, Tridium Niagara AX, Tridium Niagara R2, Honeywell CARE, Honeywell Symmetry, Johnson Controls Metasys, Siemens Desigo, Siemens Apogee, Reliable Controls, Alerton Controls, Siemens Talon, Barber Coleman Controls, Siebe, Schneider Electric, Pneumercator fuel monitoring, and Siemens WinPM power monitoring.
- Manufacturer training/certifications in the above systems preferred.
- Strong knowledge and practical experience with troubleshooting and editing DDC programs.
- Strong knowledge and experience with controls concepts for the mechanical HVAC equipment in commercial buildings.
- Practical experience interfacing & integrating DDC systems with electrical & mechanical equipment systems.
- Experience using AutoCAD a plus
- Strong knowledge of commercial mechanical and electrical systems.
- Capable of reading & interpreting mechanical & electrical drawings and specifications.
- Strong knowledge and practical experience using a Digital Multi-meter and other calibration and testing tools to troubleshoot BAS systems and their end devices.
- Physically able to climb ladders and stairs and use tools while on a ladder.
- Ability to lift/carry tools and equipment up to 50 lbs.
- Ability to work independently and as part of a team.
- Excellent communication skills, tact and professionalism to deal with multiple client contacts/departments.
- US Citizenship and ability to obtain/maintain a security Clearance.
- Ability to work independently and as part of a team.
- Good knowledge of MS Office products including Word and Excel.
Job Type: Full-time
Pay Range: $90,000 - $110,000/year depending on experience
Location: Columbia, MD; This position is location independent (on-site travel and telework) for the right candidate, however, proximity to a major international airport is required.
Working Hours: Normal Work Hours – Monday – Friday (anticipate 40 per week).
About DGI
Dayton Group, Inc. (DGI) is an 8(a), EDWOSB, and HUBZone certified small business, established in 2012 and headquartered in Maryland. We deliver high-quality services to federal agencies, specializing in working at secure federal facilities worldwide. Our core offerings include facility management & operation, construction management, program management, and environmental/EHS services. DGI is committed to the highest standards of security and compliance. Our employees rise to new challenges and reach new heights every day. DGI rewards outstanding performance with great opportunity, compensation, and recognition.
This job description is not intended to be all-inclusive. Selected candidate may perform other related duties as assigned to meet the ongoing needs of the organization.
Dayton Group, Inc. (DGI) provides equal employment opportunities to all qualified individuals, including protected groups, protected veterans and individuals with disabilities. DGI complies with applicable local, state and federal laws governing nondiscrimination in employment at each location the Company operates. This policy applies to all terms and conditions of employment, including, but not limited to: hiring, placement, promotion, termination, leaves of absence, compensation, and training. DGI is an E-Verify Employer in the United States. DGI will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please let your recruiter know.
See All 8 Automation Specialist Jobs in Maryland
Find roles in Maryland that match your experience and apply in just a few clicks.
Find Automation Specialist JobsAutomation Specialist Jobs by City in Maryland
Where Maryland roles are concentrated, by current openings.
Automation Specialist Job Market in Maryland
A snapshot from current Maryland openings, updated as new roles post.
Who's Hiring



Top Industries Hiring
- Medical Devices
- Distribution & Wholesale
What Maryland Employers Look For
The qualifications that appear most often in automation specialist jobs across Maryland.
- Bachelor's degree in electrical engineering, mechanical engineering, or a related technical field
- Hands-on experience with PLC programming, including Allen-Bradley or Siemens platforms
- Proficiency with SCADA systems, HMI development, and industrial control networks
- Familiarity with robotics integration, conveyor systems, or laboratory automation equipment
- Understanding of ISA or IEC 62443 standards for industrial automation and control safety
- Experience reading electrical schematics and P&ID diagrams for automation system troubleshooting
Automation Specialist Jobs in Maryland: Frequently Asked Questions
How do you become a automation specialist in Maryland?
Automation specialists in Maryland typically enter the field with a bachelor's degree in electrical, mechanical, or systems engineering, though associate degrees combined with hands-on PLC or controls training are accepted at many manufacturing and defense contractors. Maryland does not require a state-issued license specific to automation work, but candidates who pursue ISA Certified Automation Professional credentials or vendor certifications from Rockwell Automation or Siemens gain a clear advantage in competitive hiring pools at companies operating in the state.
Which companies hire automation specialists in Maryland?
Maryland automation specialist roles are posted by Siemens, BD, and EMCOR and others right now, based on current listings on Migrate Mate as of August 2026. Maryland's concentration of defense contractors in the Baltimore-Washington corridor and life sciences companies in Montgomery County makes it one of the more active states for both industrial and laboratory automation hiring.
Which Maryland cities have the most automation specialist jobs?
Baltimore, Lanham, and Sparks have the most automation specialist openings in Maryland. Baltimore anchors industrial and biotech automation hiring, while the Montgomery County suburbs of Rockville and Bethesda draw openings from pharmaceutical and federal health agency contractors, and areas like Jessup and Hanover attract distribution and manufacturing automation roles tied to the I-95 logistics corridor.
Are there remote automation specialist jobs in Maryland?
Yes, but they're rare. Automation specialist work is largely hands-on and tied to physical equipment, so most roles require an on-site presence. About 0% of automation specialist openings tied to Maryland are remote or hybrid as of August 2026, and those tend to be project management, systems architecture, or software-side integration roles rather than field installation or commissioning positions.
How can I get hired as a automation specialist in Maryland with little or no experience?
The most realistic entry path is landing a controls technician or automation technician role at a Maryland manufacturing facility or defense subcontractor, where on-the-job PLC training is common. Community College of Baltimore County and Montgomery College offer electronics and industrial technology programs that feed directly into entry roles. Candidates who build a portfolio of personal PLC projects or contribute to open automation repositories, or who move laterally from electrical maintenance or field service roles, stand out to Maryland employers hiring at the associate level.
Where can I find and apply to automation specialist jobs in Maryland?
You can find and apply to automation specialist jobs in Maryland on Migrate Mate, which lists current openings in the state. Search the listings to find roles that fit your background, experience level, and preferred location within Maryland, then apply directly to the ones that match.
See All 8 Automation Specialist Jobs in Maryland
Find roles in Maryland that match your experience and apply in just a few clicks.
Find Automation Specialist Jobs