Quality Inspector Jobs in Colorado
Quality Inspector jobs in Colorado are concentrated in Denver, Colorado Springs, and Pueblo, where aerospace, defense, and advanced manufacturing drive steady demand for inspection professionals at every level from entry-line to senior quality engineer. Lockheed Martin, Raytheon, and Ball Aerospace are among the most established Colorado employers with consistent quality inspector openings, particularly in aerospace systems, dimensional inspection, and first-article inspection. The market covers everything from ISO-compliance roles to nondestructive testing and supplier quality. Find a role that fits below and apply directly.
Find Quality Inspector JobsOverview
Showing 5 of 46+ Quality Inspector jobs
Job Summary
Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form’s 8130-3 and 337’s when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer’s Instructions for Continued Airworthiness and Air Methods Repair Station Manual.
Essential Functions and Responsibilities include the following:
- Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article’s permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag
- Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture’s programs, and the owner / operator’s (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier’s FAA approved inspection manual.
- Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing “OK to Close” for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight.
- Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner.
- Support production and management with failure and nonconforming material data recording and reporting.
- Identify and communicate continuous improvement opportunities for the quality program.
- Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA.
- Supervise part incoming and receiving inspections.
- Create and inspect aircraft equipment lists and weight and balance records.
- Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits.
Additional Job Requirements
- Regular scheduled attendance
- Indicate the percentage of time spent traveling - 5%
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.
Education & Experience
- High school diploma or general education degree (GED)
- Three to five years’ technical rotor wing maintenance experience
- Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives.
- Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification
- Previous experiences in a FAA Certified Repair Station.
- Proficient with FAR’s and ability to perform complex research of Federal Regulations.
- Commitment to airworthiness and qualify of aircraft parts approved for return to service.
Skills
- Individual diversity and adaptability.
- Excellent written and verbal communication
- Must be able to work autonomously and to prioritize tasks.
Computer Skills
- Proficient with Microsoft Suite, including Word, Excel, and Outlook
Certificates, Licenses, Registrations
- A&P Certificate required
- FAA Inspection Authorization (IA) preferred.
- FCC GROL License preferred.
- Abaris composite training or equivalent preferred.
Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
Job Summary
Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form’s 8130-3 and 337’s when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer’s Instructions for Continued Airworthiness and Air Methods Repair Station Manual.
Essential Functions and Responsibilities include the following:
- Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article’s permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag
- Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture’s programs, and the owner / operator’s (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier’s FAA approved inspection manual.
- Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing “OK to Close” for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight.
- Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner.
- Support production and management with failure and nonconforming material data recording and reporting.
- Identify and communicate continuous improvement opportunities for the quality program.
- Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA.
- Supervise part incoming and receiving inspections.
- Create and inspect aircraft equipment lists and weight and balance records.
- Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits.
Additional Job Requirements
- Regular scheduled attendance
- Indicate the percentage of time spent traveling - 5%
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.
Education & Experience
- High school diploma or general education degree (GED)
- Three to five years’ technical rotor wing maintenance experience
- Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives.
- Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification
- Previous experiences in a FAA Certified Repair Station.
- Proficient with FAR’s and ability to perform complex research of Federal Regulations.
- Commitment to airworthiness and qualify of aircraft parts approved for return to service.
Skills
- Individual diversity and adaptability.
- Excellent written and verbal communication
- Must be able to work autonomously and to prioritize tasks.
Computer Skills
- Proficient with Microsoft Suite, including Word, Excel, and Outlook
Certificates, Licenses, Registrations
- A&P Certificate required
- FAA Inspection Authorization (IA) preferred.
- FCC GROL License preferred.
- Abaris composite training or equivalent preferred.
Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
See All 46 Quality Inspector Jobs in Colorado
Find roles in Colorado that match your experience and apply in just a few clicks.
Find Quality Inspector JobsQuality Inspector Jobs by City in Colorado
Where Colorado roles are concentrated, by current openings.
Quality Inspector Job Market in Colorado
A snapshot from current Colorado openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Technology & Software
- Healthcare & Medical Services
What Colorado Employers Look For
The qualifications that appear most often in quality inspector jobs across Colorado.
- High school diploma or GED with vocational or technical training in quality or manufacturing
- Experience with precision measurement tools including calipers, micrometers, and CMM equipment
- Familiarity with ISO 9001 or AS9100 quality management standards
- Ability to read and interpret engineering drawings, blueprints, and technical specifications
- Working knowledge of nondestructive testing methods or willingness to obtain NDT certification
- Strong documentation skills and experience with quality management software or ERP systems
Quality Inspector Jobs in Colorado: Frequently Asked Questions
How do you become a quality inspector in Colorado?
Most quality inspector roles in Colorado are entered through a combination of technical education and on-the-job training rather than a state-issued license. Completing an associate degree or certificate program in manufacturing technology, industrial quality, or a related field from a Colorado community college such as Emily Griffith Technical College or Front Range Community College strengthens candidacy. Certifications from the American Society for Quality, such as Certified Quality Inspector or Certified Quality Technician, are widely recognized by Colorado aerospace and manufacturing employers and improve hiring prospects considerably.
Which companies hire quality inspectors in Colorado?
Employers hiring quality inspectors in Colorado right now include RK, NEOTech, and CRUSOE, based on current listings on Migrate Mate as of November 2026. Colorado's deep aerospace and defense manufacturing base means many of these openings require familiarity with AS9100 standards or defense contract quality requirements.
Which Colorado cities have the most quality inspector jobs?
Denver, Colorado Springs, and Aurora lead Colorado for quality inspector openings. Denver anchors the largest share of postings thanks to its concentration of aerospace primes, defense contractors, and advanced manufacturing facilities, while Colorado Springs and Pueblo contribute steadily through defense installations, steel production, and industrial manufacturing operations that maintain ongoing inspection staffing needs.
Are there remote quality inspector jobs in Colorado?
Yes, but they're rare. Quality inspection is a fundamentally hands-on role requiring physical access to parts, assemblies, or production lines, so fully remote positions are uncommon. About 0% of quality inspector openings tied to Colorado are remote or hybrid as of November 2026, and those tend to be in supplier quality auditing, document control, or quality systems administration rather than floor-level inspection work.
How can I get hired as a quality inspector in Colorado with little or no experience?
The most realistic entry path is a quality technician or production inspector role at a Colorado manufacturer, where on-the-job training is common for candidates with a technical certificate or associate degree. Colorado community colleges including Arapahoe Community College and Pueblo Community College offer manufacturing and quality programs that large employers recognize. Candidates moving from adjacent roles such as machinist, assembler, or receiving inspector often transition into quality inspection without prior title-specific experience, particularly if they hold or are pursuing a Certified Quality Inspector credential from the American Society for Quality.
Where can I find and apply to quality inspector jobs in Colorado?
You can find and apply to quality inspector jobs in Colorado on Migrate Mate, which lists current Colorado openings across aerospace, defense, manufacturing, and industrial sectors. Find roles that fit your experience and apply directly to each employer.
See All 46 Quality Inspector Jobs in Colorado
Find roles in Colorado that match your experience and apply in just a few clicks.
Find Quality Inspector Jobs