Building Engineer Jobs in North Carolina
Building engineer jobs in North Carolina are consistently active, with demand concentrated in commercial real estate, healthcare campuses, higher education facilities, and manufacturing across experience levels from entry-level technicians to senior chief engineers. Charlotte, Raleigh, and Durham lead hiring volume, anchored by employers such as Duke University Health System, Cushman and Wakefield, and Highwoods Properties. The most sought-after specialties in North Carolina include HVAC and mechanical systems, building automation and controls, and preventive maintenance program management. Find a role that fits below and apply directly.
Find Building Engineer JobsOverview
Showing 5 of 26+ Building Engineer jobs









Job Title
Building Engineer
Job Description Summary
Job Description
- Perform all plumbing, electrical, or HVAC requirements of the building(s)
- Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
- Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
- Verify field conditions and perform any necessary repairs or adjustments
- Monitor Energy Management
- Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
- Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
- Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed
- Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
- Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
- Document and report activities to supervisor
- Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
- Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
- Complete all required C&W Safety Training as scheduled annually
- Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
IMPORTANT EDUCATION:
- High School Diploma of GED Equivalent
- Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE:
- 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS:
- Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
- May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
- Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
- Basic Computing Skills in Outlook, Excel & Word
- Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
- Knowledgeable in energy management systems, techniques and operations
- Thorough knowledge in all building systems operations, maintenance and repair
WORK ENVIRONMENT:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
- Regularly required to crouch and reach to install/move equipment
- Involves movement between departments, floors, and properties to facilitate work
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $23.80 - $28.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: “Cushman & Wakefield”See All 26 Building Engineer Jobs in North Carolina
Find roles in North Carolina that match your experience and apply in just a few clicks.
Find Building Engineer JobsBuilding Engineer Jobs by City in North Carolina
Where North Carolina roles are concentrated, by current openings.
Building Engineer Job Market in North Carolina
A snapshot from current North Carolina openings, updated as new roles post.
Who's Hiring



Top Industries Hiring
- Construction & Real Estate
What North Carolina Employers Look For
The qualifications that appear most often in building engineer jobs across North Carolina.
- Active or in-progress North Carolina mechanical or facilities-related licensure recognized by the state
- Hands-on experience maintaining commercial HVAC, electrical, and plumbing systems
- Familiarity with building automation systems and energy management controls
- Ability to read and interpret blueprints, mechanical drawings, and equipment manuals
- Experience with computerized maintenance management systems such as Maximo or Archibus
- Valid driver's license for travel between multi-site facilities within a metro area
Building Engineer Jobs in North Carolina: Frequently Asked Questions
How do you become a building engineer in North Carolina?
Most building engineer positions in North Carolina are filled through a combination of a relevant associate or bachelor's degree in mechanical engineering technology, HVAC, or facilities management, plus hands-on technical experience. While North Carolina does not require a single mandatory state license for the building engineer title itself, employers strongly favor candidates who hold EPA Section 608 refrigerant handling certification and, for roles in regulated industries like healthcare, Joint Commission familiarity. The North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors oversees trade licensing that many building engineers pursue to advance.
Which companies hire building engineers in North Carolina?
Employers hiring building engineers in North Carolina right now include Lincoln Property Company, Clark Nexsen, a JMT Company, and Johnson, Mirmiran & Thompson, based on current listings on Migrate Mate as of September 2026. North Carolina's large healthcare systems, university campuses, and commercial property management firms consistently post the highest volume of building engineer openings across the state.
Which North Carolina cities have the most building engineer jobs?
Charlotte, Raleigh, and Durham have the most building engineer openings in North Carolina. Charlotte's concentration of corporate headquarters and commercial towers drives demand there, while Raleigh and Durham benefit from dense research university campuses, health systems like Duke Health and UNC Health, and the Research Triangle's life sciences facilities, which generate steady year-round maintenance and engineering roles.
Are there remote building engineer jobs in North Carolina?
Yes, but they're rare. Building engineering is fundamentally a hands-on, on-site role requiring physical presence to inspect, maintain, and repair mechanical, electrical, and plumbing systems. About 30% of building engineer openings tied to North Carolina are remote or hybrid as of September 2026, and those positions are almost exclusively in project management oversight, technical consulting, or facilities planning rather than day-to-day operations.
How can I get hired as a building engineer in North Carolina with little or no experience?
The most realistic entry path is through a building maintenance technician or facilities assistant role, which large North Carolina employers like Duke University, UNC Health, and commercial property managers regularly post as entry-level positions that develop into building engineer roles. Completing an associate degree in HVAC technology or mechanical systems at a North Carolina community college, such as Wake Tech or Central Piedmont, combined with EPA Section 608 certification, gives candidates a clear edge and often qualifies them for structured on-the-job training tracks within facilities departments.
Where can I find and apply to building engineer jobs in North Carolina?
You can find and apply to building engineer jobs in North Carolina on Migrate Mate, which lists current openings from employers hiring across the state right now. Find roles that fit your experience and location, then apply directly to the employer.
See All 26 Building Engineer Jobs in North Carolina
Find roles in North Carolina that match your experience and apply in just a few clicks.
Find Building Engineer Jobs