Hardware Engineer Jobs in North Carolina
Hardware Engineer jobs in North Carolina are consistently active, with demand concentrated in defense electronics, semiconductor manufacturing, and telecommunications hardware across a range of experience levels from entry-level to principal engineer. The heaviest hiring is in the Research Triangle Park area, Charlotte, and the Raleigh-Durham metro, where companies like Cisco, Lenovo, and Wolfspeed maintain significant engineering operations. The most sought-after specializations include embedded systems design, FPGA development, and RF and mixed-signal hardware. Find a role that fits below and apply directly.
Find Hardware Engineer JobsOverview
Showing 5 of 13+ Hardware Engineer jobs
What success looks like in this role:
Unisys Corporation is seeking an experienced On-Site Service Engineer (OSE) to provide hands-on support for enterprise data center servers and hardware environments , including next-generation AI infrastructure.
This is a hands-on server hardware and break/fix role . The successful candidate will have direct experience diagnosing, repairing, replacing, and maintaining enterprise server hardware in a data center, field service, or customer-facing environment.
Prior AI experience is not required. Strong experience with enterprise servers and data center hardware is the priority.
What You’ll Do
Provide on-site technical support for Dell PowerEdge and other enterprise server hardware
Diagnose and resolve server hardware failures and system issues to minimize customer downtime
Perform hands-on hardware installation, removal, replacement, and repair, including:
Memory/DIMMs
CPUs/processors
Power supplies
Fans and cooling components
Hard drives/SSDs
RAID/HBA components
NICs and other PCIe components
GPUs and accelerator hardware
Motherboards/system boards and other server components
Perform rack-and-stack, server installation, cabling, component swaps, and hardware configuration
Troubleshoot issues involving server hardware, BIOS/firmware, operating systems, and hardware diagnostics
Perform firmware and BIOS updates and utilize server management tools such as Dell iDRAC or comparable platforms
Execute both reactive break/fix and preventive maintenance following established procedures
Troubleshoot and isolate hardware failures using documented diagnostic procedures and technical resources
Work directly with customers and internal technical teams during service events to communicate status, troubleshoot issues, and drive resolution
Accurately document service activities, hardware replacements, troubleshooting steps, and resolution details
Escalate complex technical issues when appropriate
Participate in on-call rotations and provide extended coverage as required
You will be successful in this role if you have:
What You Bring – Required
3+ years of hands-on experience supporting enterprise servers, data center hardware, or similar infrastructure
Direct, hands-on experience physically working on server hardware — installing, removing, diagnosing, repairing, or replacing server components
Experience troubleshooting and replacing components such as memory, CPUs, power supplies, storage, RAID/HBA, NICs, fans/cooling systems, PCIe components, or GPUs
Experience working with rack-mounted enterprise servers in a data center, field service, or customer environment
Strong understanding of server hardware architecture and troubleshooting methodology
Experience with hardware diagnostics, BIOS/firmware, and server management tools
Familiarity with Linux or similar operating systems
Strong troubleshooting and problem-solving skills with the ability to independently diagnose hardware issues
Comfortable working independently in a customer-facing environment
Ability to clearly communicate technical issues and resolutions to customers and internal teams
Ability to lift up to 50 lbs. , travel to customer sites, and support flexible/on-call schedules
Preferred Qualifications
Experience supporting Dell PowerEdge servers
Dell or other enterprise hardware certifications
Experience with iDRAC, iLO, or comparable server management platforms
Experience supporting GPU/AI server infrastructure
Experience with data center operations, rack/stack, structured cabling, or server deployment
Associate’s or Bachelor’s degree in IT, Computer Science, or a related field
Important Note
AI infrastructure experience is not required. Candidates with strong enterprise server and data center hardware experience who are willing to learn emerging AI platforms are encouraged to apply.
#LI-SB2
This role may require access to export-controlled commodities and technology. Therefore, to conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government.
Unisys is proud to be an equal opportunity employer that considers all qualified applicants without regard to age, caste, citizenship, color, disability, family medical history, family status, ethnicity, gender, gender expression, gender identity, genetic information, marital status, national origin, parental status, pregnancy, race, religion, sex, sexual orientation, transgender status, veteran status or any other category protected by law.
This commitment includes our efforts to provide for all those who seek to express interest in employment the opportunity to participate without barriers. If you are a US job seeker unable to review the job opportunities herein, or cannot otherwise complete your expression of interest, without additional assistance and would like to discuss a request for reasonable accommodation, please contact our Global Recruiting organization at GlobalRecruiting@unisys.com or alternatively Toll Free: 888-560-1782 (Prompt 4). US job seekers can find more information about Unisys’ EEO commitment here .
What success looks like in this role:
Unisys Corporation is seeking an experienced On-Site Service Engineer (OSE) to provide hands-on support for enterprise data center servers and hardware environments , including next-generation AI infrastructure.
This is a hands-on server hardware and break/fix role . The successful candidate will have direct experience diagnosing, repairing, replacing, and maintaining enterprise server hardware in a data center, field service, or customer-facing environment.
Prior AI experience is not required. Strong experience with enterprise servers and data center hardware is the priority.
What You’ll Do
Provide on-site technical support for Dell PowerEdge and other enterprise server hardware
Diagnose and resolve server hardware failures and system issues to minimize customer downtime
Perform hands-on hardware installation, removal, replacement, and repair, including:
Memory/DIMMs
CPUs/processors
Power supplies
Fans and cooling components
Hard drives/SSDs
RAID/HBA components
NICs and other PCIe components
GPUs and accelerator hardware
Motherboards/system boards and other server components
Perform rack-and-stack, server installation, cabling, component swaps, and hardware configuration
Troubleshoot issues involving server hardware, BIOS/firmware, operating systems, and hardware diagnostics
Perform firmware and BIOS updates and utilize server management tools such as Dell iDRAC or comparable platforms
Execute both reactive break/fix and preventive maintenance following established procedures
Troubleshoot and isolate hardware failures using documented diagnostic procedures and technical resources
Work directly with customers and internal technical teams during service events to communicate status, troubleshoot issues, and drive resolution
Accurately document service activities, hardware replacements, troubleshooting steps, and resolution details
Escalate complex technical issues when appropriate
Participate in on-call rotations and provide extended coverage as required
You will be successful in this role if you have:
What You Bring – Required
3+ years of hands-on experience supporting enterprise servers, data center hardware, or similar infrastructure
Direct, hands-on experience physically working on server hardware — installing, removing, diagnosing, repairing, or replacing server components
Experience troubleshooting and replacing components such as memory, CPUs, power supplies, storage, RAID/HBA, NICs, fans/cooling systems, PCIe components, or GPUs
Experience working with rack-mounted enterprise servers in a data center, field service, or customer environment
Strong understanding of server hardware architecture and troubleshooting methodology
Experience with hardware diagnostics, BIOS/firmware, and server management tools
Familiarity with Linux or similar operating systems
Strong troubleshooting and problem-solving skills with the ability to independently diagnose hardware issues
Comfortable working independently in a customer-facing environment
Ability to clearly communicate technical issues and resolutions to customers and internal teams
Ability to lift up to 50 lbs. , travel to customer sites, and support flexible/on-call schedules
Preferred Qualifications
Experience supporting Dell PowerEdge servers
Dell or other enterprise hardware certifications
Experience with iDRAC, iLO, or comparable server management platforms
Experience supporting GPU/AI server infrastructure
Experience with data center operations, rack/stack, structured cabling, or server deployment
Associate’s or Bachelor’s degree in IT, Computer Science, or a related field
Important Note
AI infrastructure experience is not required. Candidates with strong enterprise server and data center hardware experience who are willing to learn emerging AI platforms are encouraged to apply.
#LI-SB2
This role may require access to export-controlled commodities and technology. Therefore, to conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government.
Unisys is proud to be an equal opportunity employer that considers all qualified applicants without regard to age, caste, citizenship, color, disability, family medical history, family status, ethnicity, gender, gender expression, gender identity, genetic information, marital status, national origin, parental status, pregnancy, race, religion, sex, sexual orientation, transgender status, veteran status or any other category protected by law.
This commitment includes our efforts to provide for all those who seek to express interest in employment the opportunity to participate without barriers. If you are a US job seeker unable to review the job opportunities herein, or cannot otherwise complete your expression of interest, without additional assistance and would like to discuss a request for reasonable accommodation, please contact our Global Recruiting organization at GlobalRecruiting@unisys.com or alternatively Toll Free: 888-560-1782 (Prompt 4). US job seekers can find more information about Unisys’ EEO commitment here .
See All 13 Hardware Engineer Jobs in North Carolina
Find roles in North Carolina that match your experience and apply in just a few clicks.
Find Hardware Engineer JobsHardware Engineer Jobs by City in North Carolina
Where North Carolina roles are concentrated, by current openings.
Hardware Engineer Job Market in North Carolina
A snapshot from current North Carolina openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Manufacturing
- Technology & Software
- Electronics & Hardware
- Non-Profit & Social Services
What North Carolina Employers Look For
The qualifications that appear most often in hardware engineer jobs across North Carolina.
- Bachelor's degree in electrical engineering, computer engineering, or a closely related field
- Hands-on experience with PCB design tools such as Altium Designer or Cadence Allegro
- Proficiency in FPGA development using VHDL or Verilog for digital hardware applications
- Familiarity with signal integrity analysis, schematic capture, and hardware verification testing
- Experience supporting hardware through full product lifecycle from prototype through production
- Strong documentation skills and ability to collaborate with cross-functional engineering teams
Hardware Engineer Jobs in North Carolina: Frequently Asked Questions
How do you become a hardware engineer in North Carolina?
Most hardware engineer roles in North Carolina require a bachelor's degree in electrical engineering, computer engineering, or a related discipline. North Carolina does not require a state-issued professional license for most industry hardware engineering positions, though engineers working on public infrastructure projects may need a Professional Engineer license through the North Carolina State Board of Examiners for Engineers and Surveyors. Building embedded systems or RF hardware experience through internships at Research Triangle Park employers strengthens candidates considerably.
How much do hardware engineers make in North Carolina?
Hardware engineers in North Carolina earn a median of about $134,670 a year, based on May 2025 Bureau of Labor Statistics wage data, ranging from around $74,310 for the lowest 10% to over $234,390 for the top 10%. Pay rises with experience, specialty, and employer.
Which companies hire hardware engineers in North Carolina?
Employers hiring hardware engineers in North Carolina right now include Lenovo, Xylem, and AFEX, based on current listings on Migrate Mate as of August 2026. North Carolina's concentration of defense contractors, semiconductor firms, and networking hardware companies in the Research Triangle Park region makes it one of the more consistent markets for hardware engineering openings in the Southeast.
Which North Carolina cities have the most hardware engineer jobs?
Morrisville, Raleigh, and Cary have the most hardware engineer openings in North Carolina. The Research Triangle Park area dominates because of its dense cluster of semiconductor, networking, and defense electronics employers, while Charlotte draws hardware engineering roles through its growing technology and financial infrastructure sector, and smaller metros like Morrisville and Cary benefit from proximity to major RTP-anchored campuses.
Are there remote hardware engineer jobs in North Carolina?
Yes, but they're rare. Hardware engineering is predominantly hands-on work involving lab equipment, prototype builds, and physical testing, which limits fully remote opportunities. About 0% of hardware engineer openings tied to North Carolina are remote or hybrid as of August 2026, and those positions tend to concentrate in design review, documentation, and systems architecture roles rather than bench-level development work.
How can I get hired as a hardware engineer in North Carolina with little or no experience?
The most realistic entry path is a new-graduate or co-op role at one of the Research Triangle Park companies that run structured associate engineer programs, including firms in the semiconductor and networking hardware sectors. Applying for hardware lab technician or test engineer associate positions at Wolfspeed, Cisco's RTP campus, or Lenovo's North Carolina operations gives candidates early exposure to production hardware environments. A portfolio demonstrating a completed PCB design project or FPGA implementation strengthens applications significantly against candidates with similar academic backgrounds.
Where can I find and apply to hardware engineer jobs in North Carolina?
You can find and apply to hardware engineer jobs in North Carolina on Migrate Mate, which lists current openings from employers hiring in the state right now. Find roles that fit your experience and specialization and apply directly from the listings.
See All 13 Hardware Engineer Jobs in North Carolina
Find roles in North Carolina that match your experience and apply in just a few clicks.
Find Hardware Engineer Jobs