Electrical Controls Engineer Visa Sponsorship Jobs in Georgia
Georgia's electrical controls engineer market spans automotive manufacturing in the Metro Atlanta corridor, Savannah's port-adjacent industrial base, and Kia's major assembly plant in West Point. Employers like Novelis, Graphic Packaging International, and Siemens Energy actively hire for these roles and have documented histories of visa sponsorship for qualified candidates.
Find Electrical Controls Engineer JobsOverview
Showing 5 of 127+ Electrical Controls Engineer Jobs in Georgia with Visa Sponsorship
See all 127+ Electrical Controls Engineer Jobs in Georgia with Visa Sponsorship
Sign up for free to unlock all listings, filter by visa type, and get alerts for new Electrical Controls Engineer Jobs in Georgia with Visa Sponsorship.
Get Access To All JobsThe Franklin Biomass Facility, located in Carnesville, GA, generates 55 net megawatts of clean, renewable energy by converting sustainably sourced wood biomass into electricity. The facility utilizes an advanced Foster Wheeler boiler, along with a hot precipitator and selective catalytic reduction (SCR) system, to ensure efficient combustion and reduced emissions. With a single turbine generator, the plant reliably supplies power to the local grid while promoting sustainable energy practices and supporting long-term environmental stewardship in the region.
Opportunity Summary
The Associate Instrumentation, Controls & Electrical (IC&E) Technician supports the safe, reliable, and efficient operation of the Franklin Biomass Facility by assisting with the maintenance, calibration, testing, and troubleshooting of instrumentation, control systems, and electrical equipment. Working under the guidance of experienced technicians, this role helps maintain PLC, DCS, SCADA, turbine controls, and balance-of-plant systems while supporting preventive maintenance, plant reliability, environmental compliance, and safe operating practices.
Your scope of responsibility as Associate IC&E Technician includes the following primary functions:
- Assist with the installation, calibration, testing, troubleshooting, repair, and maintenance of instrumentation, control systems, electrical equipment, and associated plant systems to support safe and reliable operation.
- Support the maintenance and troubleshooting of PLC, DCS, SCADA, turbine control, and other automated control systems while assisting with system modifications and performance improvements.
- Perform preventive, predictive, corrective, and emergency maintenance on electrical equipment, including switchgear, motor control centers, transformers, motors, variable frequency drives, batteries, chargers, and generator excitation systems.
- Calibrate and maintain field instrumentation, transmitters, analyzers, control valves, Continuous Emissions Monitoring Systems (CEMS), and other process control equipment to ensure accurate operation and regulatory compliance.
- Assist with testing, tuning, and troubleshooting of boiler, combustion, steam turbine, fuel handling, and emissions control systems to optimize plant performance and reliability.
- Read and interpret electrical drawings, wiring diagrams, P&IDs, schematics, and OEM documentation to perform maintenance and support troubleshooting activities.
- Maintain accurate maintenance records, calibration data, equipment documentation, and plant drawings using the site's computerized maintenance management system (CMMS).
- Support maintenance outages by coordinating with plant personnel, contractors, vendors, and OEM representatives while promoting safe work practices and compliance with company policies.
- Participate in root cause analysis, reliability initiatives, procedure improvements, and continuous improvement efforts to enhance equipment performance and plant reliability.
- Perform other duties as assigned in support of the safe, reliable, and efficient operation of the Franklin Biomass Facility.
NAES Safe
Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance.
Working Relationships
The Associate IC&E Technician reports to the Maintenance Manager and works closely with plant personnel, contractors, and original equipment manufacturer (OEM) representatives to support maintenance activities and plant operations.
Physical Requirements and Working Conditions
Physical demands include standing for extended periods of time, climbing multiple levels of stairs, climbing ladders over 50 feet in height, entering and exiting equipment cabs, traversing uneven or elevated surfaces, and working inside confined spaces. The role routinely requires lifting up to 50 pounds and performing tasks from elevated platforms or walkways.
Work may be performed in conditions involving dust, wood particles, fumes, high noise levels, and extreme temperatures near operating equipment. Outdoor tasks in all weather conditions are required, including in high-heat environments adjacent to biomass processing systems.
The use of personal protective equipment (PPE) is mandatory and may include hard hats, safety glasses, hearing protection, gloves, high-visibility clothing, steel-toe boots, flame-resistant clothing (FRC), respirators, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions are enforced in and around the facility to ensure plant safety and environmental compliance.
Fitness for Duty
All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.
Work Schedule
The Associate IC&E Technician typically works a Monday through Friday day shift schedule. Occasional overtime, flexible schedules, weekend and holiday work, and periodic on-call duty may be required to support plant operations, maintenance activities, outages, and emergency response.
Compensation
This position offers a base pay rate ranging from $36 to $41 per hour, along with eligibility for an annual performance bonus.
Relocation assistance is available for non-local candidates, if needed.
Qualifications and Technical Competencies
- Associate degree in Instrumentation, Electrical Engineering Technology, Process Technology, Industrial Maintenance, Plant Technology, or a related technical field preferred. Equivalent military, industrial, or technical experience may be considered.
- Technician-level experience in power generation, manufacturing, or another heavy industrial environment supporting instrumentation, electrical, or controls maintenance.
- Working knowledge of industrial electrical systems, including motors, motor control centers, switchgear, transformers, variable frequency drives, batteries, chargers, and related equipment.
- Familiarity with instrumentation and automated control systems, including PLCs, DCS, SCADA, transmitters, analyzers, control valves, and process instrumentation used in industrial facilities.
- Basic understanding of boiler, steam turbine, auxiliary equipment, fuel handling, and emissions control systems, with the ability to assist in troubleshooting and equipment performance improvements.
- Ability to read and interpret electrical drawings, wiring diagrams, schematics, P&IDs, and OEM technical documentation.
- Experience using computerized maintenance management systems (CMMS) and Microsoft Office applications for maintenance documentation and reporting.
- Strong troubleshooting, communication, teamwork, and organizational skills, with the ability to work safely and effectively in a collaborative industrial environment.
- Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times.
About NAES
NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants.
NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Franklin Biomass Facility, located in Carnesville, GA, generates 55 net megawatts of clean, renewable energy by converting sustainably sourced wood biomass into electricity. The facility utilizes an advanced Foster Wheeler boiler, along with a hot precipitator and selective catalytic reduction (SCR) system, to ensure efficient combustion and reduced emissions. With a single turbine generator, the plant reliably supplies power to the local grid while promoting sustainable energy practices and supporting long-term environmental stewardship in the region.
Opportunity Summary
The Associate Instrumentation, Controls & Electrical (IC&E) Technician supports the safe, reliable, and efficient operation of the Franklin Biomass Facility by assisting with the maintenance, calibration, testing, and troubleshooting of instrumentation, control systems, and electrical equipment. Working under the guidance of experienced technicians, this role helps maintain PLC, DCS, SCADA, turbine controls, and balance-of-plant systems while supporting preventive maintenance, plant reliability, environmental compliance, and safe operating practices.
Your scope of responsibility as Associate IC&E Technician includes the following primary functions:
- Assist with the installation, calibration, testing, troubleshooting, repair, and maintenance of instrumentation, control systems, electrical equipment, and associated plant systems to support safe and reliable operation.
- Support the maintenance and troubleshooting of PLC, DCS, SCADA, turbine control, and other automated control systems while assisting with system modifications and performance improvements.
- Perform preventive, predictive, corrective, and emergency maintenance on electrical equipment, including switchgear, motor control centers, transformers, motors, variable frequency drives, batteries, chargers, and generator excitation systems.
- Calibrate and maintain field instrumentation, transmitters, analyzers, control valves, Continuous Emissions Monitoring Systems (CEMS), and other process control equipment to ensure accurate operation and regulatory compliance.
- Assist with testing, tuning, and troubleshooting of boiler, combustion, steam turbine, fuel handling, and emissions control systems to optimize plant performance and reliability.
- Read and interpret electrical drawings, wiring diagrams, P&IDs, schematics, and OEM documentation to perform maintenance and support troubleshooting activities.
- Maintain accurate maintenance records, calibration data, equipment documentation, and plant drawings using the site's computerized maintenance management system (CMMS).
- Support maintenance outages by coordinating with plant personnel, contractors, vendors, and OEM representatives while promoting safe work practices and compliance with company policies.
- Participate in root cause analysis, reliability initiatives, procedure improvements, and continuous improvement efforts to enhance equipment performance and plant reliability.
- Perform other duties as assigned in support of the safe, reliable, and efficient operation of the Franklin Biomass Facility.
NAES Safe
Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance.
Working Relationships
The Associate IC&E Technician reports to the Maintenance Manager and works closely with plant personnel, contractors, and original equipment manufacturer (OEM) representatives to support maintenance activities and plant operations.
Physical Requirements and Working Conditions
Physical demands include standing for extended periods of time, climbing multiple levels of stairs, climbing ladders over 50 feet in height, entering and exiting equipment cabs, traversing uneven or elevated surfaces, and working inside confined spaces. The role routinely requires lifting up to 50 pounds and performing tasks from elevated platforms or walkways.
Work may be performed in conditions involving dust, wood particles, fumes, high noise levels, and extreme temperatures near operating equipment. Outdoor tasks in all weather conditions are required, including in high-heat environments adjacent to biomass processing systems.
The use of personal protective equipment (PPE) is mandatory and may include hard hats, safety glasses, hearing protection, gloves, high-visibility clothing, steel-toe boots, flame-resistant clothing (FRC), respirators, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions are enforced in and around the facility to ensure plant safety and environmental compliance.
Fitness for Duty
All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.
Work Schedule
The Associate IC&E Technician typically works a Monday through Friday day shift schedule. Occasional overtime, flexible schedules, weekend and holiday work, and periodic on-call duty may be required to support plant operations, maintenance activities, outages, and emergency response.
Compensation
This position offers a base pay rate ranging from $36 to $41 per hour, along with eligibility for an annual performance bonus.
Relocation assistance is available for non-local candidates, if needed.
Qualifications and Technical Competencies
- Associate degree in Instrumentation, Electrical Engineering Technology, Process Technology, Industrial Maintenance, Plant Technology, or a related technical field preferred. Equivalent military, industrial, or technical experience may be considered.
- Technician-level experience in power generation, manufacturing, or another heavy industrial environment supporting instrumentation, electrical, or controls maintenance.
- Working knowledge of industrial electrical systems, including motors, motor control centers, switchgear, transformers, variable frequency drives, batteries, chargers, and related equipment.
- Familiarity with instrumentation and automated control systems, including PLCs, DCS, SCADA, transmitters, analyzers, control valves, and process instrumentation used in industrial facilities.
- Basic understanding of boiler, steam turbine, auxiliary equipment, fuel handling, and emissions control systems, with the ability to assist in troubleshooting and equipment performance improvements.
- Ability to read and interpret electrical drawings, wiring diagrams, schematics, P&IDs, and OEM technical documentation.
- Experience using computerized maintenance management systems (CMMS) and Microsoft Office applications for maintenance documentation and reporting.
- Strong troubleshooting, communication, teamwork, and organizational skills, with the ability to work safely and effectively in a collaborative industrial environment.
- Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times.
About NAES
NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants.
NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Electrical Controls Engineer Job Roles in Georgia
See all 127+ Electrical Controls Engineer Jobs in Georgia
Sign up for free to filter by visa type, set job alerts, and find employers with verified sponsorship history.
Search Electrical Controls Engineer Jobs in GeorgiaElectrical Controls Engineer Jobs in Georgia: Frequently Asked Questions
Which companies in Georgia sponsor visas for electrical controls engineers?
Georgia-based manufacturers and industrial firms with documented H-1B visa sponsorship histories for controls engineering roles include Novelis, Graphic Packaging International, Siemens Energy, Kia Georgia, and Shaw Industries. Automotive suppliers clustered around the West Point and Cartersville corridors also sponsor regularly. Sponsorship decisions depend on the specific role, the candidate's qualifications, and the employer's existing immigration infrastructure.
What visa types are most common for electrical controls engineers in Georgia?
The H-1B is the most common visa for electrical controls engineers in Georgia, as the role typically qualifies as a specialty occupation requiring a bachelor's degree in electrical engineering or a closely related field. TN visa status is an option for Canadian and Mexican nationals in qualifying engineering roles. Candidates already on OPT or STEM OPT extension may work while their employer pursues H-1B sponsorship.
Which cities in Georgia have the most electrical controls engineer sponsorship jobs?
Metro Atlanta, including Alpharetta, Smyrna, and Norcross, concentrates the largest share of electrical controls engineer roles due to its industrial manufacturing base and corporate headquarters presence. Savannah is growing as a hub tied to port logistics and manufacturing expansion. West Point and LaGrange have seen increased demand from automotive assembly and supplier operations, particularly following Kia Georgia's expansion.
How to find electrical controls engineer visa sponsorship jobs in Georgia?
Migrate Mate is built specifically for international candidates seeking visa sponsorship jobs in the U.S., including electrical controls engineer roles in Georgia. The platform filters for employers with active sponsorship histories, saving you the time of sorting through postings that won't support a work visa. Searching by state lets you focus on Georgia's manufacturing and industrial employers directly.
Are there any Georgia-specific considerations for electrical controls engineers seeking sponsorship?
Georgia's heavy presence in automotive manufacturing, paper and packaging, and energy sectors means controls engineering roles often involve hands-on plant environments rather than pure design work. Employers will expect familiarity with PLCs, SCADA systems, and industrial automation standards. Prevailing wage requirements under H-1B rules apply based on the specific location and job classification, so roles in metro Atlanta may carry different wage determinations than those in rural manufacturing sites.
What is the prevailing wage for sponsored electrical controls engineer jobs in Georgia?
U.S. employers sponsoring a visa must pay at least the prevailing wage, which is what workers in the same role, area, and experience level typically earn. The Department of Labor sets this rate to make sure companies aren't hiring foreign workers simply because they'd accept lower pay than a U.S. worker. It varies by job title, location, and experience. You can look up current prevailing wage rates for any occupation and location using the OFLC Wage Search page.