Plant Maintenance Technician Jobs in Pennsylvania
Plant Maintenance Technician jobs in Pennsylvania are concentrated in Philadelphia, Pittsburgh, and Allentown, where industrial manufacturing, chemical processing, and food production facilities drive steady demand across experience levels from entry-level to lead technician. Employers like Procter & Gamble, Air Products, and U.S. Steel maintain long-standing Pennsylvania facilities and consistently hire for preventive maintenance, electrical troubleshooting, and PLC systems work. Demand is strong across the commonwealth, making Pennsylvania one of the more active markets in the mid-Atlantic for this role. See the openings below and apply to the ones that match your experience.
Find JobsOverview
Showing 5 of 25+ Plant Maintenance Technician jobs
Join our team
We’re seeking a hands-on Plant Electrical Maintenance Technician to keep Shady Grove operations powered up. You’ll perform electrical installations and maintain equipment across our facilities and at other assigned locations per direction from the Maintenance Manager, Maintenance Supervisors, the Electrical Engineer, or their representatives. You’ll also be an active contributor to Lean, 5S, and TPR programs.
Role highlights
- Work across three‑phase 480/12,500V systems, single‑phase branch circuits, and low‑voltage DC controls.
- Service and install motors, generators, transfer switches, transformers, switchgear, bus ducts, and disconnects.
- Troubleshoot efficiently to minimize downtime.
- Perform NEC‑compliant load calculations to properly size conductors, conduit, fuses, and breakers.
- Apply NEC, IEEE, and NEMA standards daily.
- Carry out additional tasks as assigned by supervision.
Minimum requirements
- Thorough understanding of OSHA regulations and NFPA 70E as they apply to electrical work in heavy manufacturing.
- Valid driver’s license.
Education & experience
- High School Diploma or GED preferred.
- Technical trade school training and/or equivalent practical experience preferred.
- Minimum 2 years in heavy manufacturing, a commercial/industrial apprenticeship, or relevant military experience preferred.
Preferred skills
- Read and interpret electrical schematics, wiring diagrams, ladder logic, and single‑line high‑voltage diagrams for NFPA 70E arc‑flash compliance.
- Read operating procedures/technical manuals and write clear routine reports and correspondence.
Health & safety responsibilities
- Maintain housekeeping and 5S standards.
- Perform all tasks safely and wear required PPE.
- Follow job‑specific and facility‑wide safety procedures and rules.
- Participate in safety training and demonstrate competency.
- Report hazards, unsafe acts, and safety suggestions—or correct issues you can address safely.
Working Environment
Working Environment:
The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This position covers any and all manufacturing environments, and may be located inside or outside. While performing the duties of this job, the employee is regularly required to use tools or controls. The employee is frequently required to stand, reach, climb or balance; stoop, kneel, crouch, or crawl. Incumbent must be able to physically climb ladders and safely operate lift equipment, such as scissor lifts, Manlifts and boom trucks. Incumbent will work in a typical manufacturing environment including the use of solvents, adhesives, hydraulic oil, petroleum products, etc. There is frequent lifting and/or moving of up to 50 pounds. Incumbent must be willing to work at various heights.
Culture & continuous improvement
Be a catalyst for Lean, 5S, and TPR—driving safer, more efficient, and more reliable operations across our plant.
Additional information
Responsibilities may evolve; the company may reassign duties as operational priorities change.
Join our team
We’re seeking a hands-on Plant Electrical Maintenance Technician to keep Shady Grove operations powered up. You’ll perform electrical installations and maintain equipment across our facilities and at other assigned locations per direction from the Maintenance Manager, Maintenance Supervisors, the Electrical Engineer, or their representatives. You’ll also be an active contributor to Lean, 5S, and TPR programs.
Role highlights
- Work across three‑phase 480/12,500V systems, single‑phase branch circuits, and low‑voltage DC controls.
- Service and install motors, generators, transfer switches, transformers, switchgear, bus ducts, and disconnects.
- Troubleshoot efficiently to minimize downtime.
- Perform NEC‑compliant load calculations to properly size conductors, conduit, fuses, and breakers.
- Apply NEC, IEEE, and NEMA standards daily.
- Carry out additional tasks as assigned by supervision.
Minimum requirements
- Thorough understanding of OSHA regulations and NFPA 70E as they apply to electrical work in heavy manufacturing.
- Valid driver’s license.
Education & experience
- High School Diploma or GED preferred.
- Technical trade school training and/or equivalent practical experience preferred.
- Minimum 2 years in heavy manufacturing, a commercial/industrial apprenticeship, or relevant military experience preferred.
Preferred skills
- Read and interpret electrical schematics, wiring diagrams, ladder logic, and single‑line high‑voltage diagrams for NFPA 70E arc‑flash compliance.
- Read operating procedures/technical manuals and write clear routine reports and correspondence.
Health & safety responsibilities
- Maintain housekeeping and 5S standards.
- Perform all tasks safely and wear required PPE.
- Follow job‑specific and facility‑wide safety procedures and rules.
- Participate in safety training and demonstrate competency.
- Report hazards, unsafe acts, and safety suggestions—or correct issues you can address safely.
Working Environment
Working Environment:
The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This position covers any and all manufacturing environments, and may be located inside or outside. While performing the duties of this job, the employee is regularly required to use tools or controls. The employee is frequently required to stand, reach, climb or balance; stoop, kneel, crouch, or crawl. Incumbent must be able to physically climb ladders and safely operate lift equipment, such as scissor lifts, Manlifts and boom trucks. Incumbent will work in a typical manufacturing environment including the use of solvents, adhesives, hydraulic oil, petroleum products, etc. There is frequent lifting and/or moving of up to 50 pounds. Incumbent must be willing to work at various heights.
Culture & continuous improvement
Be a catalyst for Lean, 5S, and TPR—driving safer, more efficient, and more reliable operations across our plant.
Additional information
Responsibilities may evolve; the company may reassign duties as operational priorities change.
See All 25 Plant Maintenance Technician Jobs in Pennsylvania
Find roles in Pennsylvania that match your experience and apply in just a few clicks.
Find JobsPlant Maintenance Technician Jobs by City in Pennsylvania
Where Pennsylvania roles are concentrated, by current openings.
Plant Maintenance Technician Job Market in Pennsylvania
A snapshot from current Pennsylvania openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Retail
- Food & Beverage
- Medical Devices
- Chemicals & Materials
- Technology & Software
What Pennsylvania Employers Look For
The qualifications that appear most often in plant maintenance technician jobs across Pennsylvania.
- High school diploma or GED plus a completed technical trade or vocational program
- Hands-on experience with preventive and corrective maintenance on industrial equipment
- Proficiency in electrical systems, hydraulics, pneumatics, and mechanical troubleshooting
- Ability to read technical schematics, wiring diagrams, and equipment manuals
- Familiarity with PLC programming or operation in an industrial manufacturing environment
- Valid driver's license and ability to work rotating shifts including nights and weekends
Plant Maintenance Technician Jobs in Pennsylvania: Frequently Asked Questions
How do you become a plant maintenance technician in Pennsylvania?
Most plant maintenance technicians in Pennsylvania start with a diploma or associate degree from a technical school or community college, such as programs offered at Pennsylvania College of Technology or Thaddeus Stevens College of Technology, focused on industrial maintenance, electromechanical technology, or mechatronics. Pennsylvania does not require a state-issued license for general plant maintenance work, but employers strongly prefer candidates who hold NIMS credentials, OSHA safety certifications, or documented hands-on experience with industrial equipment before hiring.
Which companies hire plant maintenance technicians in Pennsylvania?
Companies currently hiring plant maintenance technicians in Pennsylvania include Jennmar Services, Vulcan Materials Company, and Weis Markets, per current listings on Migrate Mate as of September 2026. Pennsylvania's dense manufacturing corridor along the I-78 and I-81 corridors, along with legacy industrial operations in the Pittsburgh region, keeps employer demand consistent year-round.
Which Pennsylvania cities have the most plant maintenance technician jobs?
Hanover, Bristol, and Sunbury lead Pennsylvania for plant maintenance technician openings. Philadelphia's concentration of pharmaceutical, food processing, and chemical plants anchors demand there, Pittsburgh's steel and industrial heritage keeps facilities active in the western part of the state, and Allentown's manufacturing base along the Lehigh Valley corridor draws consistent hiring from both large corporate plants and mid-size production facilities.
Are there remote plant maintenance technician jobs in Pennsylvania?
Yes, but they're rare. Plant maintenance technician work is fundamentally hands-on and facility-based, so the vast majority of roles require an on-site presence. About 25% of plant maintenance technician openings tied to Pennsylvania are remote or hybrid as of September 2026, and those positions typically involve equipment scheduling, maintenance planning, or technical coordination roles rather than direct floor-level repair work.
How can I get hired as a plant maintenance technician in Pennsylvania with little or no experience?
The most realistic entry path is completing an industrial maintenance or electromechanical program at a Pennsylvania technical college, then applying to facilities operations or maintenance helper roles at large manufacturers in the Philadelphia suburbs or Lehigh Valley. Employers like Procter & Gamble and Air Products run structured apprenticeship and on-the-job training programs for candidates coming from adjacent roles such as production operator, janitorial technician, or machine operator. Earning an OSHA 10 card and a NIMS Level I credential before applying gives entry-level candidates a measurable edge in Pennsylvania screening processes.
Where can I find and apply to plant maintenance technician jobs in Pennsylvania?
You can find and apply to plant maintenance technician jobs in Pennsylvania on Migrate Mate, which lists current openings across the state. Search the listings to find roles that match your experience level and location, then apply directly to the ones that fit.
See All 25 Plant Maintenance Technician Jobs in Pennsylvania
Find roles in Pennsylvania that match your experience and apply in just a few clicks.
Find Jobs