Quality Control Technician Jobs in Colorado
Quality Control Technician jobs in Colorado concentrate in aerospace and defense manufacturing, medical device production, food and beverage processing, and semiconductor fabrication, with demand at every level from entry-level inspectors to senior process QC specialists. Denver, Colorado Springs, and Pueblo anchor most of the hiring, where established employers like Lockheed Martin, Ball Corporation, and Molson Coors maintain large manufacturing and quality operations. The most consistent openings call for expertise in GD&T interpretation, ISO and AS9100 auditing, and metrology. Scan the live roles below and apply to whichever ones fit.
Find JobsOverview
Showing 5 of 52+ Quality Control Technician jobs
Job Summary
Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form’s 8130-3 and 337’s when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer’s Instructions for Continued Airworthiness and Air Methods Repair Station Manual.
Essential Functions and Responsibilities include the following:
- Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article’s permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag
- Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture’s programs, and the owner / operator’s (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier’s FAA approved inspection manual.
- Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing “OK to Close” for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight.
- Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner.
- Support production and management with failure and nonconforming material data recording and reporting.
- Identify and communicate continuous improvement opportunities for the quality program.
- Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA.
- Supervise part incoming and receiving inspections.
- Create and inspect aircraft equipment lists and weight and balance records.
- Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits.
Additional Job Requirements
- Regular scheduled attendance
- Indicate the percentage of time spent traveling - 5%
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.
Education & Experience
- High school diploma or general education degree (GED)
- Three to five years’ technical rotor wing maintenance experience
- Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives.
- Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification
- Previous experiences in a FAA Certified Repair Station.
- Proficient with FAR’s and ability to perform complex research of Federal Regulations.
- Commitment to airworthiness and qualify of aircraft parts approved for return to service.
Skills
- Individual diversity and adaptability.
- Excellent written and verbal communication
- Must be able to work autonomously and to prioritize tasks.
Computer Skills
- Proficient with Microsoft Suite, including Word, Excel, and Outlook
Certificates, Licenses, Registrations
- A&P Certificate required
- FAA Inspection Authorization (IA) preferred.
- FCC GROL License preferred.
- Abaris composite training or equivalent preferred.
Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
Job Summary
Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form’s 8130-3 and 337’s when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer’s Instructions for Continued Airworthiness and Air Methods Repair Station Manual.
Essential Functions and Responsibilities include the following:
- Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article’s permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag
- Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture’s programs, and the owner / operator’s (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier’s FAA approved inspection manual.
- Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing “OK to Close” for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight.
- Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner.
- Support production and management with failure and nonconforming material data recording and reporting.
- Identify and communicate continuous improvement opportunities for the quality program.
- Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA.
- Supervise part incoming and receiving inspections.
- Create and inspect aircraft equipment lists and weight and balance records.
- Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits.
Additional Job Requirements
- Regular scheduled attendance
- Indicate the percentage of time spent traveling - 5%
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.
Education & Experience
- High school diploma or general education degree (GED)
- Three to five years’ technical rotor wing maintenance experience
- Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives.
- Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification
- Previous experiences in a FAA Certified Repair Station.
- Proficient with FAR’s and ability to perform complex research of Federal Regulations.
- Commitment to airworthiness and qualify of aircraft parts approved for return to service.
Skills
- Individual diversity and adaptability.
- Excellent written and verbal communication
- Must be able to work autonomously and to prioritize tasks.
Computer Skills
- Proficient with Microsoft Suite, including Word, Excel, and Outlook
Certificates, Licenses, Registrations
- A&P Certificate required
- FAA Inspection Authorization (IA) preferred.
- FCC GROL License preferred.
- Abaris composite training or equivalent preferred.
Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
See All 52 Quality Control Technician Jobs in Colorado
Find roles in Colorado that match your experience and apply in just a few clicks.
Find JobsQuality Control Technician Jobs by City in Colorado
Where Colorado roles are concentrated, by current openings.
Quality Control Technician Job Market in Colorado
A snapshot from current Colorado openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Healthcare & Medical Services
What Colorado Employers Look For
The qualifications that appear most often in quality control technician jobs across Colorado.
- High school diploma or associate degree in a technical, manufacturing, or science field
- Hands-on experience with precision measurement tools including calipers, micrometers, and CMMs
- Familiarity with ISO 9001, AS9100, or FDA 21 CFR quality management standards
- Ability to read and interpret engineering drawings and GD&T specifications accurately
- Experience documenting nonconformances and completing corrective action reports
- Working knowledge of statistical process control methods and basic data analysis
Quality Control Technician Jobs in Colorado: Frequently Asked Questions
How do you become a quality control technician in Colorado?
Most quality control technician roles in Colorado do not require a state-issued license, but employers consistently prefer candidates with an associate degree in manufacturing technology, engineering technology, or a closely related field. Certifications from the American Society for Quality, particularly the Certified Quality Inspector credential, carry strong weight with Colorado aerospace and medical device employers. Technical programs at Pueblo Community College and Emily Griffith Technical College offer relevant foundational training recognized by Colorado manufacturers.
Which companies hire quality control technicians in Colorado?
Employers hiring quality control technicians in Colorado right now include Agilent Technologies, Olgoonik, and Air Methods, based on current listings on Migrate Mate as of November 2026. Colorado's concentration of aerospace primes, defense contractors, and FDA-regulated medical device manufacturers means demand for quality technicians stays active across Front Range and southern Colorado facilities year-round.
Which Colorado cities have the most quality control technician jobs?
Denver, Colorado Springs, and Aurora lead Colorado for quality control technician openings. Denver's broad manufacturing and tech base drives the largest share of listings, Colorado Springs reflects the dense concentration of aerospace and defense contractors like Northrop Grumman and General Dynamics in the Pikes Peak region, and Pueblo supports steady demand through its steel, food processing, and industrial manufacturing sector.
Are there remote quality control technician jobs in Colorado?
Yes, but they're rare. Quality control work is largely hands-on, requiring physical inspection of parts, materials, or production lines, so most roles are on-site by nature. About 0% of quality control technician openings tied to Colorado are remote or hybrid as of November 2026, and those positions tend to focus on documentation, supplier auditing, or quality management system administration rather than floor-level inspection work.
How can I get hired as a quality control technician in Colorado with little or no experience?
The most realistic entry path is a production inspector or manufacturing associate role, which many Colorado aerospace and food processing employers use as a direct pipeline into quality functions. Lockheed Martin's Littleton facility and Ball Corporation's Westminster operations both hire entry-level inspection staff who rotate into QC roles over time. Completing a short metrology or blueprint reading course at a Colorado community college, and earning the American Society for Quality's Certified Quality Inspector credential, gives candidates a measurable edge over applicants with no formal quality background.
Where can I find and apply to quality control technician jobs in Colorado?
You can find and apply to quality control technician jobs in Colorado on Migrate Mate, which lists current Colorado openings across aerospace, medical device, food production, and general manufacturing employers. Search the listings, identify the roles that match your experience and location, and apply directly to the ones that fit.
See All 52 Quality Control Technician Jobs in Colorado
Find roles in Colorado that match your experience and apply in just a few clicks.
Find Jobs