Maintenance Jobs in Kansas
Maintenance jobs in Kansas are concentrated in Wichita, Kansas City, and Topeka, where manufacturing plants, healthcare campuses, and commercial facilities drive steady demand for skilled technicians at every level from entry-level to facilities manager. Major employers such as Spirit AeroSystems, Evergy, and Stormont Vail Health maintain large maintenance workforces across the state. The most in-demand specialties are HVAC systems, electrical maintenance, and preventive maintenance for industrial and commercial equipment. Scan the live roles below and apply to whichever ones fit.
Find Maintenance JobsOverview
Showing 5 of 53+ Maintenance jobs











General Definition of Work
Under supervision (Utilities Maintenance Worker I) or general supervision (Utilities Maintenance Worker II), or direction (Utilities Maintenance Worker III), performs skilled and semi-skilled labor in the maintenance, operation, and repair of the City’s water distribution system; installation, maintenance operation and repair of the City’s wastewater collection system; reads residential and commercial water meters and provides customer service; maintains all vehicles and equipment used; and performs a variety of related duties as assigned.
Distinguishing Characteristics
Utilities Maintenance Worker I – This is the first certified class in the Utilities Maintenance Worker series. This class is distinguished from the Utilities Maintenance Worker II class by the performance of the more routine maintenance and operations tasks and duties. Advancement to the Utilities Maintenance Worker II level is based on demonstrated proficiency in performing the assigned functions, gaining Class I Distribution & Collections Certificates, and is at the discretion of higher level supervisory or management staff.
Qualification Requirements
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable an individual with disabilities to perform the essential functions.
Essential Functions
- Maintain water distribution system including main and service lines, valves, fire hydrants, reservoirs and related equipment; locate and repair service line leaks.
- Perform maintain and inspection duties on the City’s wastewater collection system and lift stations, including, but no limited to, collection lines, junctures, pumps and motors; locate leaks and complete repairs.
- Clean wastewater collection system; operate hydro-vacuum truck to flush collection system; open clogs in lines; clean manholes, wet wells and lift stations.
- Install, repair and replace pumps and motors at pump stations and ground water well sites.
- Overhaul and maintain hydraulically controlled pressure valves and controls.
- Participate in the installation of distribution system lines; cut and prepare piping and fittings; thread and link pipe; replace gate valves and couplings; install and replace water services; install water meters.
- Operate leak detection and pipe location equipment relative to excavation, tapping and repair of mains and lines; inspect and assess leaks.
- Repair, maintain and ensure the security of manholes and pump stations; monitor and record lift station operations including flow rates, pump hours, electrical an telemetry problems and SCADA; prepare and maintain a variety of reports.
- Read water meters with computerized hand held machine; field test customer meters for accuracy.
- Respond to customer service complaints; check high and low pressure; check for meter leaks; install new meters; inspect for sewer overflows and stoppages; perform service turn-ons and turn-offs; notify customers of water interruptions and of the type of work to be performed; leave door hangers to notify customers of late payments.
- Maintain water reservoirs and related equipment.
- Operate of a variety of heavy construction and maintenance equipment including a dump truck, skip loader, backhoe, trencher, water tank truck, hand tools, power tools, and other related equipment; participate in training staff in the operation of equipment; pick up and deliver materials and supplies as necessary.
- Participate in cutting and breaking asphalt and concrete surfaces; construct forms, pour and finish concrete; repair and participate in the pavement of roadways, sidewalks, manholes and related structures; perform concrete repairs, patch work, brick, block walls, and associated masonry work.
- Maintain, update and inspect backflows and fire checks.
- Service and maintain all air-vacs and blow-offs in the distribution system.
- Maintain records related to water distribution and sanitary sewer collection system installation, repair, and maintenance activities; enter data in mobile mapping system.
- Perform traffic control to ensure the safety of service workers and the general public.
- Record operating hours and usages of water distribution system pumps and motors.
- Remove weeds and debris from lift stations, storm drains, easements and grounds; spray pesticides and herbicides as needed.
- As needed, assist with equipment maintenance at the water treatment and wastewater plants; as needed, assist plan operations to bypass operations and cleaning operations in wells, traps, lines, etc.
- Monitor inventory of assigned materials and supplies; requisition and restock maintenance supplies, materials and equipment as necessary.
- Maintain vehicles and tools used in the maintenance of the water and wastewater systems.
- Ensure and adhere to safe work practices and procedures including, but not limited to lockout/tag out and confined space rules and regulations.
- Assist in cleaning storm drains and catch basins as necessary.
- Performs emergency locates.
- Perform on-call duties and overtime as required.
- Perform related duties as required.
Knowledge, Skills and Abilities
General knowledge meter reading and hand held recording book and equipment; conditions and situations that indicate meter failure; uses and purposes of general construction tools and equipment; safe work practices; operational characteristics of water distribution systems; operational characteristics and hydraulics of wastewater collections systems; safety procedures including confined space entry; preventative maintenance techniques and procedures; basic NPDES requirements as they pertain to potable water discharges; tools and equipment used in the maintenance and repair of water distribution and wastewater collections systems; geographic Information System (GIS) mapping and GPS locating systems; geography and street layout of City and surrounding area; operation and maintenance of related computer software and systems; operation of mobile computer systems; computer data control systems; office procedures, methods, and equipment including computers and applicable software applications; ability to perform semi-skilled and skilled maintenance and repair work related to water distribution and wastewater collection systems; solve customer complaints and interact effectively with the Finance Department; drain and recharge a water main in a safe manner. Troubleshoot problems in the system including pump station valves; calculate water pressure, volume and flow; rebuild and replace fire hydrants; use and operate hand tools, mechanical equipment, and power tools and equipment; read and interpret basic maps and blueprints. Perform water sampling duties; operate heavy equipment effectively and safely; work independently in the absence of supervision; perform heavy manual labor; explain water and sewer rates and billing rules to customers; be on standby; respond to, and assist on, emergency repairs on weekends and nights; work safely in confined spaces with hazardous materials; participate in and complete safety training courses including CPR; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships with those contacted in the course of work; demonstrate leadership, management, and technical skills through effective collaboration, team resources, progressive decision making, and personal responsibility; ability to be committed to the mission, vision, and strategic direction of the City of Bonner Springs; ability to obey and comply with all City ordinances and policies.
In addition, Utilities Maintenance Worker II & III must have knowledge of: Principles of lead supervision and training; advanced safety procedures, including confined space entry.
In addition, Utility Maintenance Worker III must have ability to: Lead and train staff in the area of work assigned; assign tasks to lower level water distribution staff; Interpret, explain, and enforce departmental and City policies and procedures; operate office equipment including computers and supporting software.
Education and Experience:
Any combination of education and experience that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be:
Education/Training:
High school diploma or GED.
Experience:
Utility Maintenance Worker I: Some general maintenance experience within area of assignment is desired.
Physical Requirements
This work requires the regular exertion of up to 50 pounds of force and occasional exertion of over 100 pounds of force; work regularly requires standing, walking, speaking or hearing, reaching with hands and arms and lifting, frequently requires using hands to finger, handle or feel, climbing or balancing, stooping, kneeling, crouching or crawling, pushing or pulling and repetitive motions and occasionally requires sitting and tasting or smelling; work has standard vision requirements; vocal communication is required for expressing or exchanging ideas by means of the spoken word and conveying detailed or important instructions to others accurately, loudly or quickly; hearing is required to perceive information at normal spoken word levels and to receive detailed information through oral communications and/or to make fine distinctions in sound; work requires visual inspection involving small defects and/or small parts, using of measuring devices, assembly or fabrication of parts within arm’s length, operating machines, operating motor vehicles or equipment and observing general surroundings and activities; work regularly requires exposure to outdoor weather conditions, frequently requires exposure to wet, humid conditions (non-weather), working near moving mechanical parts, working in high, precarious places, exposure to fumes or airborne particles, exposure to the risk of electrical shock and exposure to vibration and occasionally requires exposure to toxic or caustic chemicals, exposure to extreme cold (non-weather), exposure to extreme heat (non-weather) and wearing a self-contained breathing apparatus; work is generally in a loud noise location (e.g. grounds maintenance, heavy traffic).
All Positions:
Possession of, or ability to obtain, an appropriate, valid Class B CDL within six months of employment
Possession of, or ability to obtain, CPR and First Aid certifications within the first six months.
Additional industry-specific certifications may be required depending on area of assignment.
Valid driver's license.
See All 53 Maintenance Jobs in Kansas
Find roles in Kansas that match your experience and apply in just a few clicks.
Find Maintenance JobsMaintenance Jobs by City in Kansas
Where Kansas roles are concentrated, by current openings.
Maintenance Job Market in Kansas
A snapshot from current Kansas openings, updated as new roles post.
Who's Hiring



What Kansas Employers Look For
The qualifications that appear most often in maintenance jobs across Kansas.
- Valid EPA 608 certification for roles involving refrigerants or HVAC systems
- Demonstrated experience with preventive maintenance programs and work order systems
- Working knowledge of electrical, plumbing, and mechanical systems in commercial or industrial settings
- Ability to read technical manuals, schematics, and blueprints accurately
- Familiarity with OSHA safety standards and lockout/tagout procedures
- Valid Kansas driver's license for roles requiring travel between facilities or campuses
Maintenance Jobs in Kansas: Frequently Asked Questions
How do you become a maintenance technician in Kansas?
Kansas does not require a single statewide maintenance license, but specific credentials are essential depending on your specialty. HVAC technicians must hold an EPA 608 certification, and electricians working independently need a Kansas electrical license issued through the Kansas Department of Labor. Most employers expect a high school diploma or GED plus completion of a vocational or community college program in industrial maintenance, HVAC, or electrical technology, such as those offered at Wichita Area Technical College or Kansas City Kansas Community College.
Which companies hire maintenance technicians in Kansas?
Kansas maintenance roles are posted by YINGLING AVIATION, Walmart, and Love’s Travel Stops and others right now, based on current listings on Migrate Mate as of November 2026. Kansas's strong manufacturing and energy sectors mean large industrial employers and utilities consistently post openings across Wichita and the Kansas City metro.
Which Kansas cities have the most maintenance jobs?
Wichita, Topeka, and Overland Park have the most maintenance openings in Kansas. Wichita leads because of its large aerospace manufacturing base and healthcare systems, Kansas City draws demand from distribution centers and commercial real estate, and Topeka's state government facilities and regional healthcare employers generate consistent openings even outside the two largest metros.
Are there remote maintenance jobs in Kansas?
Yes, but they're rare. Maintenance work is fundamentally hands-on and tied to physical facilities, so most openings require on-site presence. About 10% of maintenance openings tied to Kansas are remote or hybrid as of November 2026, and those positions tend to involve maintenance planning, computerized maintenance management system coordination, or facilities oversight roles rather than direct repair work.
How can I get hired as a maintenance technician in Kansas with little or no experience?
The most realistic entry path is a maintenance helper or facilities assistant role, which large Kansas employers such as manufacturing plants and hospital systems use to develop entry-level workers on the job. Wichita Area Technical College and Kansas City Kansas Community College offer short-term industrial maintenance programs that signal readiness to employers. Earning an EPA 608 certification before applying gives candidates a concrete credential edge, and lateral moves from janitorial, warehousing, or construction laborer roles into maintenance helper positions are common at Kansas distribution and manufacturing facilities.
Where can I find and apply to maintenance jobs in Kansas?
You can find and apply to maintenance jobs in Kansas on Migrate Mate, which lists current Kansas openings updated regularly. Search the available roles, find the positions that match your experience and location, and apply directly to the ones that fit.
See All 53 Maintenance Jobs in Kansas
Find roles in Kansas that match your experience and apply in just a few clicks.
Find Maintenance Jobs