Electronics Technician Jobs in Florida
Electronics Technician jobs in Florida concentrate in aerospace and defense, naval and military systems, healthcare equipment, and telecommunications, with strong demand at every level from entry-level bench technicians to senior field service and systems integration specialists. Tampa, Orlando, and Melbourne are the largest hiring centers, anchored by employers such as L3Harris Technologies, Lockheed Martin, and Northrop Grumman, all of which maintain substantial Florida operations. Avionics, radar and electronic warfare systems, and medical device maintenance are among the most in-demand specialties across the state. See the openings below and apply to the ones that match your experience.
Find Electronics Technician JobsOverview
Showing 5 of 51+ Electronics Technician jobs
Test Technician
Melbourne, FL
6 months
Schedule: 2nd shift 3:30pm - 1am
Job Description:
The Test Technician 3 is responsible for manufacturing test support during the assembly, test, and acceptance processes in the manufacture of products. This candidate will also lead other technicians in multiple areas to assist the leadership team with the overall objective.
Job Responsibilities:
- This candidate will be the technical lead for multiple products
- Works with Engineers to analyze and resolve manufacturing test problems.
- Eliminate/reduce test defects and improve test yields. Perform root cause analysis and take corrective action to resolve test failures.
- Studies test equipment performance and reliability, and establishes programs and solutions for decreasing equipment downtime. This includes troubleshooting LabView code.
- Receives little instruction on daily work. Receives detailed instruction on new tasks or processes. Follows established procedures and processes.
- Intermediate use and application of standard engineering and manufacturing principles and processes.
- Develops solutions to technical problems of moderate scope and difficulty under the guidance of more senior engineers.
- Develops, implements and maintains test methods and processes in the manufacture and test of sub-assembly, module, and top level product for moderately difficult product lines.
- Determines proper test flows and sequencing for the efficient flow of assigned products.
- Provides technical assistance and training support to floor test technicians.
- Maintains test documentation in current configuration and oversees accurate change management procedures for test documents for assigned products.
- Analyzes established manufacturing test processes for cost reduction opportunities.
- Develops working knowledge of moderately difficult test systems and hardware.
- Provides technical assistance and support to sub-assembly and top-level testing.
- May provide Material Review Board analysis and disposition of supplier products.
- Candidate should have RF knowledge in analog or microwave frequencies.
Basic Qualifications:
High school diploma or equivalent and a minimum of 4 years of relevant experience. In the absence of a high school diploma or GED, 6 years of relevant experience is required.
Must be proficient in the use of network analyzers, spectrum analyzers, signal generators, frequency counters, and power measurement equipment.
Must be able to apply application of electronic theory to configure, model, layout, build, test, troubleshoot, determine solutions and modify electronic product for engineering efforts applicable to the department or program.
Preferred Qualification:
Eight years of relevant experience is preferred.
Experience providing guidance and mentorship to other technicians.
Experience providing training support to other technicians.
Pay: $28.00 - $31.00 per hour
Expected hours: 40.0 per week
Work Location: In person
Test Technician
Melbourne, FL
6 months
Schedule: 2nd shift 3:30pm - 1am
Job Description:
The Test Technician 3 is responsible for manufacturing test support during the assembly, test, and acceptance processes in the manufacture of products. This candidate will also lead other technicians in multiple areas to assist the leadership team with the overall objective.
Job Responsibilities:
- This candidate will be the technical lead for multiple products
- Works with Engineers to analyze and resolve manufacturing test problems.
- Eliminate/reduce test defects and improve test yields. Perform root cause analysis and take corrective action to resolve test failures.
- Studies test equipment performance and reliability, and establishes programs and solutions for decreasing equipment downtime. This includes troubleshooting LabView code.
- Receives little instruction on daily work. Receives detailed instruction on new tasks or processes. Follows established procedures and processes.
- Intermediate use and application of standard engineering and manufacturing principles and processes.
- Develops solutions to technical problems of moderate scope and difficulty under the guidance of more senior engineers.
- Develops, implements and maintains test methods and processes in the manufacture and test of sub-assembly, module, and top level product for moderately difficult product lines.
- Determines proper test flows and sequencing for the efficient flow of assigned products.
- Provides technical assistance and training support to floor test technicians.
- Maintains test documentation in current configuration and oversees accurate change management procedures for test documents for assigned products.
- Analyzes established manufacturing test processes for cost reduction opportunities.
- Develops working knowledge of moderately difficult test systems and hardware.
- Provides technical assistance and support to sub-assembly and top-level testing.
- May provide Material Review Board analysis and disposition of supplier products.
- Candidate should have RF knowledge in analog or microwave frequencies.
Basic Qualifications:
High school diploma or equivalent and a minimum of 4 years of relevant experience. In the absence of a high school diploma or GED, 6 years of relevant experience is required.
Must be proficient in the use of network analyzers, spectrum analyzers, signal generators, frequency counters, and power measurement equipment.
Must be able to apply application of electronic theory to configure, model, layout, build, test, troubleshoot, determine solutions and modify electronic product for engineering efforts applicable to the department or program.
Preferred Qualification:
Eight years of relevant experience is preferred.
Experience providing guidance and mentorship to other technicians.
Experience providing training support to other technicians.
Pay: $28.00 - $31.00 per hour
Expected hours: 40.0 per week
Work Location: In person
See All 51 Electronics Technician Jobs in Florida
Find roles in Florida that match your experience and apply in just a few clicks.
Find Electronics Technician JobsElectronics Technician Jobs by City in Florida
Where Florida roles are concentrated, by current openings.
Electronics Technician Job Market in Florida
A snapshot from current Florida openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Airlines
- Automotive
- Manufacturing
- Technology & Software
- Electronics & Hardware
What Florida Employers Look For
The qualifications that appear most often in electronics technician jobs across Florida.
- Associate degree or higher in electronics technology, electrical engineering technology, or a related field
- Hands-on experience diagnosing and repairing electronic circuits, assemblies, or systems
- Familiarity with test equipment such as oscilloscopes, multimeters, and spectrum analyzers
- Active CompTIA A+ or IPC-A-610 certification preferred by many Florida defense and manufacturing employers
- Ability to read and interpret schematics, wiring diagrams, and technical documentation
- Security clearance eligibility required for a significant share of Florida aerospace and defense roles
Electronics Technician Jobs in Florida: Frequently Asked Questions
How do you become an electronics technician in Florida?
Florida does not require a state-issued license specifically for electronics technicians, so the path focuses on education and credentials recognized by employers. Most hiring managers expect at least an associate degree in electronics technology or a closely related field from a Florida community college or technical college. Industry certifications such as CompTIA A+, CET from the Electronics Technicians Association, or IPC soldering standards strengthen any application, and defense-sector roles often require the ability to obtain a federal security clearance.
Which companies hire electronics technicians in Florida?
Companies currently hiring electronics technicians in Florida include Reliance Test & Technology, GE Aerospace, and Lockheed Martin, per current listings on Migrate Mate as of November 2026. Florida's concentration of aerospace primes, naval contractors, and medical device manufacturers means demand stays broad across both large corporations and specialized defense subcontractors throughout the state.
Which Florida cities have the most electronics technician jobs?
Miami, Clearwater, and Eglin AFB lead Florida for electronics technician openings. Tampa and Orlando benefit from large defense and simulation-technology campuses, while Melbourne sits at the center of Florida's Space Coast corridor where L3Harris, Northrop Grumman, and related contractors drive consistent hiring for avionics and electronic systems roles.
Are there remote electronics technician jobs in Florida?
Yes, but they're rare. Electronics technician work is fundamentally hands-on, requiring physical access to equipment, circuits, and test benches, so most Florida roles are fully on-site. About 0% of electronics technician openings tied to Florida are remote or hybrid as of November 2026, and those tend to be technical support, documentation, or quality-review functions rather than active repair or installation work.
How can I get hired as an electronics technician in Florida with little or no experience?
The most realistic entry path is completing an electronics technology program at a Florida community college such as Valencia College, Broward College, or Hillsborough Community College, then targeting entry-level titles like electronics assembler, bench technician, or field service helper. Large Florida defense employers and medical device companies frequently hire recent graduates into structured apprentice or associate technician roles. Earning an IPC soldering certification or a CompTIA A+ before applying gives candidates a concrete credential that compensates for limited work history.
Where can I find and apply to electronics technician jobs in Florida?
You can find and apply to electronics technician jobs in Florida on Migrate Mate, which lists current openings across the state. Search the roles that fit your experience level and specialty, then apply directly to the ones that match.
See All 51 Electronics Technician Jobs in Florida
Find roles in Florida that match your experience and apply in just a few clicks.
Find Electronics Technician Jobs