X-Ray Tech Jobs in New York
X-Ray Tech jobs in New York are concentrated in hospital systems, outpatient imaging centers, and urgent care networks, with demand steady at every level from entry-level technologists to lead and supervisory roles. The heaviest hiring occurs in New York City, Buffalo, and Rochester, where large systems like NYC Health + Hospitals, Northwell Health, and Rochester Regional Health maintain ongoing radiology staffing needs. Fluoroscopy, computed tomography, and mobile radiography are among the most in-demand specialties across the state. See the openings below and apply to the ones that match your experience.
Find X-Ray Tech JobsOverview
Showing 5 of 33+ X-Ray Tech jobs
What You'll Do
- Install and commission X-ray inspection systems: setup, beam alignment, geometric calibration, detector integration
- Commission microfocus open-tube systems — tube conditioning, vacuum validation — plus imaging software and CT acquisition setup
- Run Factory and Site Acceptance Testing (FAT/SAT)
- Perform preventive and corrective maintenance on microfocus sources, HV generators (90kV–450kV), and LINAC systems, plus HV power supplies, cooling, vacuum, and motion subsystems
- Diagnose arcing, beam instability, focal spot drift, vacuum failures, and HV breakdown; root cause analysis and corrective action
- Troubleshoot HV, control, and electromechanical subsystems — motion stages, manipulators, CT scanning systems — using oscilloscopes, multimeters, and diagnostic software
- Handle radiation safety and compliance: surveys, leakage testing, interlock verification, regulatory inspection support
- Train customer operators and maintenance staff; provide remote support; maintain service documentation Support upgrades, retrofits, and ongoing customer relationships
Must-Haves
- Bachelor's degree or diploma in Electrical/Electronics Engineering, Mechatronics, Applied Physics, Biomedical Engineering, or related technical field
- 5+ years servicing industrial X-ray systems or similar high-voltage equipment
- Experience with at least one of: microfocus X-ray sources, HV generators (90kV–450kV), or LINAC systems
- Strong electronics troubleshooting and electromechanical systems background
- Ability to read electrical schematics and technical drawings; diagnostic tools (oscilloscopes, multimeters)
- Knowledge of radiation safety practices and regulatory compliance Able to travel up to 50%, including international; lift 55–65 lbs; comfortable around high-voltage and radiation-generating equipment
Nice-to-Haves
- NDT, DR, or CT inspection system service experience
- Vacuum systems (turbo/roughing pumps); motion control or industrial automation
- CE/UL compliance processes; LINAC RF/accelerator systems Microcontroller or embedded systems troubleshooting
Application Process
- A current resume. A position-specific cover letter addressing qualifications and interest.
All inquiries and nominations will be handled with strict confidentiality.
What You'll Do
- Install and commission X-ray inspection systems: setup, beam alignment, geometric calibration, detector integration
- Commission microfocus open-tube systems — tube conditioning, vacuum validation — plus imaging software and CT acquisition setup
- Run Factory and Site Acceptance Testing (FAT/SAT)
- Perform preventive and corrective maintenance on microfocus sources, HV generators (90kV–450kV), and LINAC systems, plus HV power supplies, cooling, vacuum, and motion subsystems
- Diagnose arcing, beam instability, focal spot drift, vacuum failures, and HV breakdown; root cause analysis and corrective action
- Troubleshoot HV, control, and electromechanical subsystems — motion stages, manipulators, CT scanning systems — using oscilloscopes, multimeters, and diagnostic software
- Handle radiation safety and compliance: surveys, leakage testing, interlock verification, regulatory inspection support
- Train customer operators and maintenance staff; provide remote support; maintain service documentation Support upgrades, retrofits, and ongoing customer relationships
Must-Haves
- Bachelor's degree or diploma in Electrical/Electronics Engineering, Mechatronics, Applied Physics, Biomedical Engineering, or related technical field
- 5+ years servicing industrial X-ray systems or similar high-voltage equipment
- Experience with at least one of: microfocus X-ray sources, HV generators (90kV–450kV), or LINAC systems
- Strong electronics troubleshooting and electromechanical systems background
- Ability to read electrical schematics and technical drawings; diagnostic tools (oscilloscopes, multimeters)
- Knowledge of radiation safety practices and regulatory compliance Able to travel up to 50%, including international; lift 55–65 lbs; comfortable around high-voltage and radiation-generating equipment
Nice-to-Haves
- NDT, DR, or CT inspection system service experience
- Vacuum systems (turbo/roughing pumps); motion control or industrial automation
- CE/UL compliance processes; LINAC RF/accelerator systems Microcontroller or embedded systems troubleshooting
Application Process
- A current resume. A position-specific cover letter addressing qualifications and interest.
All inquiries and nominations will be handled with strict confidentiality.
See All 33 X-Ray Tech Jobs in New York
Find roles in New York that match your experience and apply in just a few clicks.
Find X-Ray Tech JobsX-Ray Tech Jobs by City in New York
Where New York roles are concentrated, by current openings.
X-Ray Tech Job Market in New York
A snapshot from current New York openings, updated as new roles post.
Who's Hiring
What New York Employers Look For
The qualifications that appear most often in X-Ray tech jobs across New York.
- Active New York State radiologic technologist license issued by the Department of Health
- ARRT certification in radiography required or strongly preferred by most employers
- Associate or bachelor's degree from an accredited radiologic technology program
- Proficiency with digital imaging systems such as PACS and RIS platforms
- Ability to position patients accurately and operate fixed and portable x-ray equipment
- Current BLS certification from the American Heart Association or Red Cross
X-Ray Tech Jobs in New York: Frequently Asked Questions
How do you become a x-ray tech in New York?
To work as an x-ray tech in New York, you must hold a license issued by the New York State Department of Health under the Radiologic Technology Licensing Program. You first complete an accredited radiologic technology program, typically a two-year associate degree, then pass the ARRT certification exam in radiography. With those credentials in hand, you apply for the New York license before practicing independently in any clinical setting.
Which companies hire x-ray techs in New York?
Employers hiring x-ray techs in New York right now include WellNow Urgent Care, Optum, and Philips, based on current listings on Migrate Mate as of October 2026. New York's large integrated health systems tend to post consistently throughout the year, particularly in high-volume radiology departments and affiliated outpatient imaging sites.
Which New York cities have the most x-ray tech jobs?
Syracuse, Ronkonkoma, and Bronx have the most x-ray tech openings in New York. New York City drives the largest share of volume through its dense concentration of major academic medical centers, Level I trauma centers, and outpatient imaging chains, while Buffalo and Rochester reflect strong regional health systems that serve as the primary employers in their surrounding communities.
Are there remote x-ray tech jobs in New York?
Yes, but they're rare. About 0% of x-ray tech openings tied to New York are remote or hybrid as of October 2026, which reflects how hands-on the core work is. The positions most likely to carry any remote component are teleradiology support roles, quality assurance review, or education and training coordination rather than direct patient imaging.
How can I get hired as a x-ray tech in New York with little or no experience?
The most realistic entry path is applying directly to new-grad or trainee technologist postings at large New York health systems such as Northwell Health, NYC Health + Hospitals, and Montefiore, which periodically run structured onboarding programs for newly licensed techs. Candidates who hold an active New York radiologic technology license and ARRT certification stand out even without clinical work history. Lateral moves from radiology aide or imaging support roles within hospital systems are another common door into a paid tech position.
Where can I find and apply to x-ray tech jobs in New York?
You can find and apply to x-ray tech jobs in New York on Migrate Mate, which lists current New York openings from employers across the state. Search the roles that fit your credentials and experience level and apply directly to the ones that match. No signup is needed to see the listings.
See All 33 X-Ray Tech Jobs in New York
Find roles in New York that match your experience and apply in just a few clicks.
Find X-Ray Tech Jobs