General Maintenance Worker Jobs in Texas
General Maintenance Worker jobs in Texas are concentrated in Houston, Dallas-Fort Worth, and San Antonio, where commercial real estate, manufacturing, and healthcare facilities drive steady demand at every level from entry-level building attendant to lead maintenance technician. Major employers with lasting Texas footprints include Cushman & Wakefield, CBRE, and Texas Children's Hospital, all of which maintain large in-house maintenance teams. The most in-demand specialties are HVAC systems upkeep, plumbing and electrical troubleshooting, and preventive maintenance for industrial and commercial properties. See the openings below and apply to the ones that match your experience.
Find JobsOverview
Showing 5 of 17+ General Maintenance Worker jobs
- Performs repairs, preventive and corrective maintenance on HVAC systems and equipment including; pumps, blowers, and motors
- Maintains pumps, electrical controls and related components, facilities and related equipment, and interior and exterior Lighting
- Performs work orders on facility’s buildings and grounds as required
- Makes equipment adjustments, and reports any serious equipment problems as PM’s in the M plus computer system
- Maintains computerized and manual records and prepares reports pertaining to the operation of the daily work orders, and makes changes as required to meet operating requirements.
- Identifies, schedules and coordinates the work of outside maintenance contractors in support of the facility(s) as needed.
- Follows Company’s Environmental, Health, and Safety Policies. Wear and work in proper personal protective equipment.
- Assists with operational tasks in conjunction with operation or as directed by supervisor
- Performs other related functions assigned, as they become apparent, or as management assigns
- Knowledge of mechanical operations, maintenance and repair of equipment.
- Knowledge of electrical systems related to equipment in assigned work area.
- Knowledge of proper operation of hydraulic and pneumatic equipment.
- Knowledge of the National Electrical Code.
- Knowledge of health and safety regulations. OSHA 10
- Effectively and safely operates hand tools, pneumatic tools, air compressors and other small equipment related to the maintenance trades.
- Hands-on experience in light duty electrical power systems (240 V/ single and three phase) and instrumentation calibration and use
- Must possess a high school diploma or GED.
- Additional trade specific courses preferred
- Five (5) years’ experience in the maintenance field
- Must possess a valid, active state driver’s license.
- Must pass drug screening and background checks
- Employee may be required to work indoor or outdoor work during seasonal heat and cold or other adverse weather conditions. Employee may be required to work where they may be regularly exposed to fumes, dust and odors.
- Some high noise levels from operations of equipment.
- Must be physically able to complete necessary tasks as related to the maintenance
- May have to work after normal work hours for on-call assignments.
- $22.49 per hour base pay PLUS
- $6.50 per hour (up to 40 hours) Health and Welfare dollars (these monies are used to pay for your benefits, any remaining money is applied directly to your paycheck). This is a UNION position.
- Performs repairs, preventive and corrective maintenance on HVAC systems and equipment including; pumps, blowers, and motors
- Maintains pumps, electrical controls and related components, facilities and related equipment, and interior and exterior Lighting
- Performs work orders on facility’s buildings and grounds as required
- Makes equipment adjustments, and reports any serious equipment problems as PM’s in the M plus computer system
- Maintains computerized and manual records and prepares reports pertaining to the operation of the daily work orders, and makes changes as required to meet operating requirements.
- Identifies, schedules and coordinates the work of outside maintenance contractors in support of the facility(s) as needed.
- Follows Company’s Environmental, Health, and Safety Policies. Wear and work in proper personal protective equipment.
- Assists with operational tasks in conjunction with operation or as directed by supervisor
- Performs other related functions assigned, as they become apparent, or as management assigns
- Knowledge of mechanical operations, maintenance and repair of equipment.
- Knowledge of electrical systems related to equipment in assigned work area.
- Knowledge of proper operation of hydraulic and pneumatic equipment.
- Knowledge of the National Electrical Code.
- Knowledge of health and safety regulations. OSHA 10
- Effectively and safely operates hand tools, pneumatic tools, air compressors and other small equipment related to the maintenance trades.
- Hands-on experience in light duty electrical power systems (240 V/ single and three phase) and instrumentation calibration and use
- Must possess a high school diploma or GED.
- Additional trade specific courses preferred
- Five (5) years’ experience in the maintenance field
- Must possess a valid, active state driver’s license.
- Must pass drug screening and background checks
- Employee may be required to work indoor or outdoor work during seasonal heat and cold or other adverse weather conditions. Employee may be required to work where they may be regularly exposed to fumes, dust and odors.
- Some high noise levels from operations of equipment.
- Must be physically able to complete necessary tasks as related to the maintenance
- May have to work after normal work hours for on-call assignments.
- $22.49 per hour base pay PLUS
- $6.50 per hour (up to 40 hours) Health and Welfare dollars (these monies are used to pay for your benefits, any remaining money is applied directly to your paycheck). This is a UNION position.
See All 17 General Maintenance Worker Jobs in Texas
Find roles in Texas that match your experience and apply in just a few clicks.
Find JobsGeneral Maintenance Worker Jobs by City in Texas
Where Texas roles are concentrated, by current openings.
General Maintenance Worker Job Market in Texas
A snapshot from current Texas openings, updated as new roles post.
Who's Hiring
What Texas Employers Look For
The qualifications that appear most often in general maintenance worker jobs across Texas.
- High school diploma or GED equivalent required by most Texas employers
- One or more years of hands-on building or facilities maintenance experience
- Working knowledge of HVAC, plumbing, and basic electrical systems
- Valid Texas driver's license for travel between properties or job sites
- Ability to use hand and power tools safely and read basic schematics
- EPA Section 608 certification preferred for roles involving refrigerant handling
General Maintenance Worker Jobs in Texas: Frequently Asked Questions
How do you become a general maintenance worker in Texas?
Most general maintenance workers in Texas enter the field through a high school diploma or GED combined with on-the-job training, a vocational program, or an apprenticeship through a trade school or community college. Texas does not require a statewide license specifically for general maintenance work, but roles involving electrical, HVAC, or plumbing tasks may require trade-specific registrations overseen by the Texas Department of Licensing and Regulation. Earning an EPA Section 608 certification early expands the roles available to you.
Which companies hire general maintenance workers in Texas?
Employers hiring general maintenance workers in Texas right now include ESC Region 11, Sodexo, and PRIDE Industries, based on current listings on Migrate Mate as of September 2026. Texas's large commercial real estate, healthcare, and manufacturing sectors mean demand is consistent across both urban campuses and sprawling industrial sites throughout the state.
Which Texas cities have the most general maintenance worker jobs?
Bridgeport, Fort Worth, and White Settlement have the most general maintenance worker openings in Texas. Houston's density of petrochemical plants, medical campuses, and commercial towers drives the largest share of openings, while Dallas-Fort Worth's corporate headquarters and warehouse corridors and San Antonio's military installations and healthcare systems keep demand strong in those metros as well.
Are there remote general maintenance worker jobs in Texas?
Yes, but they're rare. General maintenance work is inherently hands-on and tied to a physical location, so most openings require on-site presence. About 0% of general maintenance worker openings tied to Texas are remote or hybrid as of September 2026, and those listings typically involve administrative or coordination duties rather than direct facilities work.
How can I get hired as a general maintenance worker in Texas with little or no experience?
The most realistic entry path is applying for a building attendant or janitorial technician role at a large property management firm or hospital system, where structured on-the-job training is common. Companies like Cushman & Wakefield and CBRE regularly hire entry-level facilities assistants in Texas and promote from within. Community colleges such as Houston Community College and San Antonio College offer short-term maintenance technology certificates that signal readiness to employers. Completing an EPA Section 608 certification before applying gives candidates a concrete edge over other entry-level applicants.
Where can I find and apply to general maintenance worker jobs in Texas?
You can find and apply to general maintenance worker jobs in Texas on Migrate Mate, which lists current openings from employers across the state. Search the listings, find the roles that fit your background and location, and apply directly to the ones that match.
See All 17 General Maintenance Worker Jobs in Texas
Find roles in Texas that match your experience and apply in just a few clicks.
Find Jobs