HVAC Technician Jobs in Washington
HVAC Technician jobs in Washington represent one of the most active trades markets in the Pacific Northwest, with strong demand concentrated in commercial construction, multifamily housing, and building operations across Seattle, Tacoma, and Spokane. Large employers with deep roots in Washington's market include McKinstry, Comfort Systems USA, and Johnson Controls, all of which maintain ongoing technician hiring pipelines. Refrigeration systems, commercial HVAC controls, and heat pump installation are the specialties drawing the most consistent interest from Washington employers. See the openings below and apply to the ones that match your experience.
Find HVAC Technician JobsOverview
Showing 5 of 52+ HVAC Technician jobs
Job Title
HVAC Building Technician "Mobile"Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned propertiesJob Description
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
- Perform all plumbing, electrical, or HVAC requirements of the building(s)
- Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
- Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
- Verify field conditions and perform any necessary repairs or adjustments
- Monitor Energy Management
- Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
- Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
- Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
- Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
- Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
- Document and report activities to supervisor
- Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
- Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
- Complete all required C&W Safety Training as scheduled annually
- Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
- Technical Proficiency
- Initiative
- Flexibility
- Multi-Tasking
- Sense of Urgency
- High School Diploma of GED Equivalent
- Graduate of apprentice program or trade school preferred
- 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
- Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
- May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
- Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
- Basic Computing Skills in Outlook, Excel & Word
- Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
- Knowledgeable in energy management systems, techniques and operations.
- Thorough knowledge in all building systems operations, maintenance and repair.
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
- Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
- Involves movement between departments, floors, and properties to facilitate work
- Ability to speak clearly so others can understand you
- Ability to read and understand information presented orally and in writing
- Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $30.60 - $36.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: “Cushman & Wakefield”Job Title
HVAC Building Technician "Mobile"Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned propertiesJob Description
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
- Perform all plumbing, electrical, or HVAC requirements of the building(s)
- Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
- Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
- Verify field conditions and perform any necessary repairs or adjustments
- Monitor Energy Management
- Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
- Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
- Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
- Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
- Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
- Document and report activities to supervisor
- Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
- Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
- Complete all required C&W Safety Training as scheduled annually
- Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
- Technical Proficiency
- Initiative
- Flexibility
- Multi-Tasking
- Sense of Urgency
- High School Diploma of GED Equivalent
- Graduate of apprentice program or trade school preferred
- 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
- Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
- May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
- Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
- Basic Computing Skills in Outlook, Excel & Word
- Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
- Knowledgeable in energy management systems, techniques and operations.
- Thorough knowledge in all building systems operations, maintenance and repair.
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
- Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
- Involves movement between departments, floors, and properties to facilitate work
- Ability to speak clearly so others can understand you
- Ability to read and understand information presented orally and in writing
- Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $30.60 - $36.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: “Cushman & Wakefield”See All 52 HVAC Technician Jobs in Washington
Find roles in Washington that match your experience and apply in just a few clicks.
Find HVAC Technician JobsHVAC Technician Jobs by City in Washington
Where Washington roles are concentrated, by current openings.
HVAC Technician Job Market in Washington
A snapshot from current Washington openings, updated as new roles post.
Who's Hiring
Top Industries Hiring
- Manufacturing
What Washington Employers Look For
The qualifications that appear most often in HVAC technician jobs across Washington.
- Active Washington State 07A or 07B HVAC/refrigeration contractor license or equivalent journey-level credential
- EPA Section 608 certification for handling refrigerants required on most listings
- Minimum two to five years of hands-on commercial or residential HVAC installation and service experience
- Proficiency diagnosing and repairing forced-air, heat pump, and ductless mini-split systems
- Valid Washington driver's license and clean driving record for field service routes
- Ability to read mechanical blueprints, wiring schematics, and equipment manuals
HVAC Technician Jobs in Washington: Frequently Asked Questions
How do you become a hvac technician in Washington?
You become an hvac technician in Washington by completing an accredited HVAC program or a state-registered apprenticeship, then applying for the appropriate credential through the Washington State Department of Labor and Industries. Washington requires journey-level applicants to pass a trade exam and meet documented hours of supervised field experience. Obtaining EPA Section 608 certification before or alongside your Washington credential significantly strengthens your candidacy with most employers.
Which companies hire hvac technicians in Washington?
Companies currently hiring hvac technicians in Washington include Lane Valente Industries, Seatown, and Lennox International, per current listings on Migrate Mate as of September 2026. Washington's concentration of large commercial real estate portfolios, data centers, and hospital systems means many of these employers maintain year-round technician openings rather than seasonal spikes.
Which Washington cities have the most hvac technician jobs?
The cities with the most hvac technician openings in Washington are Seattle, Spokane, and Tacoma. The Greater Seattle area dominates due to its dense commercial construction activity, major healthcare campuses, and tech company facilities, while Spokane draws steady demand from its growing healthcare sector and the regional industrial base of eastern Washington.
Are there remote hvac technician jobs in Washington?
Yes, but they're rare. About 0% of hvac technician openings tied to Washington are remote or hybrid as of September 2026, since the work is fundamentally hands-on and tied to physical equipment. The small share of remote-eligible roles typically involves controls programming, building automation system monitoring, or technical sales support rather than field installation or maintenance.
How can I get hired as a hvac technician in Washington with little or no experience?
The most realistic entry path is enrolling in a registered HVAC apprenticeship through the Refrigeration Service Engineers Society or a union-affiliated program such as UA Local 32 in Seattle, which accepts applicants without prior experience. Washington employers like McKinstry and Comfort Systems USA regularly bring on apprentice-level technicians for helper and install-assist roles. Holding your EPA Section 608 certification before applying and having a background in electrical work or plumbing meaningfully improves your chances of landing that first position.
Where can I find and apply to hvac technician jobs in Washington?
You can find and apply to hvac technician jobs in Washington on Migrate Mate, which lists current openings tied to the state. Search for roles that match your credential level and preferred work type, whether commercial service, new construction, or controls, and apply directly to the ones that fit.
See All 52 HVAC Technician Jobs in Washington
Find roles in Washington that match your experience and apply in just a few clicks.
Find HVAC Technician Jobs